• Geomechanics and Engineering
• /
• v.17 no.6
• /
• pp.573-581
• /
• 2019

Excavation of underground cavern and shaft was proposed for the construction of a ventilation facility in an urban area. A shaft connects the street-level air plenum to an underground cavern, which extends down approximately 46 m below the street surface. At the project site, the rock mass was relatively strong and well-defined joint sets were present. A kinematic block stability analysis was first performed to estimate the required reinforcement system. Then a 3-D discontinuum numerical analysis was conducted to evaluate the capacity of the initial support and the overall stability of the required excavation, followed by a 3-D continuum numerical analysis to complement the calculated result. This paper illustrates the application of detailed numerical analyses to the design of the required initial support system for the stability of underground hard rock mining at a relatively shallow depth.

• Nuclear Engineering and Technology
• /
• v.55 no.2
• /
• pp.674-680
• /
• 2023

The brine and seawater are important and largely untapped sources of critical trace metals and elements. The coupling of selective recovery of trace metals from seawater/brine with desalination plants gives an added advantage of energy credits to desalination plants and as well as reduce the cost of desalinated water. In this paper, status review on recovery of important trace metals and other alkali metals from seawater is presented. The potential of Indian desalination plants for recovery of trace metals, based on recovery ratio of 0.35 is also highlighted. Studies carried out by the process based on adsorption using Radiation Induced Grafted (RIG) polymeric adsorbents and then fractional elutions are presented. The fouling factors due to bio fouling and dirt fouling have been estimated for various locations of interest through field trails. The pay loader in the form of compact Contactor Assembly with minimum pressure drop, for loading specially designed radiation grafted sorbent in leaflet form has been briefed, as required for plant scale facility. The typical conceptual process design details of farm assembly of project CRUDE are described.

• Economic and Environmental Geology
• /
• v.53 no.3
• /
• pp.287-296
• /
• 2020

Mine Reclamation Project is being carried out with the aim of ensuring a sustainable green living and helping to develop eco-friendly mines by analyzing, removing and preventing the harmful factors. Mines developed during the japanese colonial period and mining boom period are still not repaired throughout the country, and from these scattered risks, public safety is worth pursuing as a top priority. The project that is close to public safety in the mine recalmation project is an emergency treatment, and the most widely used method is a filling method similar to the ground subsidence prevention. If dangerous mine cavity or tunnels are located in the mountains, charging with existing materials may not be possible, or unreasonable cases may occur, and new methods of technological development are required. Emergency actions should be carried out safely and efficiently to prevent the loss of precious people's lives on the hiking paths adjacent to dangerous mining sites. In these field conditions, urethane foam materials may be an alternative. In this study, the applicability of urethane foam materials in mining was reviewed through overseas cases. It was also tested on the appropriate depth of top soil for the protection of urethane foam materials through forest fire simulation test. The test result show that approximately 15cm of soil covering (recommended 20cm over) was suitable for maintaining the function of foam materials from forest fires.

• Tunnel and Underground Space
• /
• v.13 no.1
• /
• pp.1-5
• /
• 2003

The United States Antarctic program (USAP) through its principal Support Contractor Raytheon polar Services Co. (RPSC), has recently finished a 3 years projects, almost 936m length of underground utility tunnels at Amundsen-Scott station. It accommodates the piping that conveys fresh water from current well sites, as well as waste water to repositories in abandoned wells. The under snow tunnels allow year-round access for system operations and maintenance.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1990.04a
• /
• pp.111-124
• /
• 1990

All most factories producing briquets in Seoul are currently located at residential districts. The coal dusts scattered from these factories are making serious problems in living. To get rid of this environmental pollution, moving thesis factories to places of mining coals is considered now. For doing this project, first, annual briquet demands are forecasted using regression analysis and then, optimal factory capacities to be built are obtained based on forecast demands using LP. To validate factory capacities obtained above simulation is conducted using SLAM II.

• Proceedings of the CALSEC Conference
• /
• 2003.09a
• /
• pp.197-203
• /
• 2003

The purpose of the study is to develop an integrated knowledge structuring system for the domain of engineering, in which ontology-based literature mining, knowledge acquisition, knowledge integration, and knowledge retrieval are combined using XML-based tag information and ontology management. The system supports combining different types of databases (papers and patents, technologies and innovations) and retrieving different types of knowledge simultaneously. The main objective of the system is to facilitate knowledge acquisition and knowledge retrieval from documents through an ontology-based dynamic similarity calculation and a visualization of automatically structured knowledge. Through experimentations we conducted using 100,000 words economic documents reported in the "Go！ Japan" project for analyzing Japanese industrial situation, and 100,000 words molecular biology Papers, we show the system is Practical enough for accelerating knowledge acquisition and knowledge discovery from the information sea.

• Industrial Engineering and Management Systems
• /
• v.14 no.4
• /
• pp.325-334
• /
• 2015

Nowadays, crowdsourcing has become a popular concept and is widely used in many social, economical and technological areas. For consumer product design, crowdsourcing is implemented extensively with many cases. Although there has been a lot of research on the application of crowdsourcing for product design, the big picture of how factors influence the participartion of individuals from the crowd in a crowdsourcing project for product design has not yet been understood. This paper aims to investigate the relationships of crowd participation and influencing factors including: process, product, and reward. To do this, we conducted a survey on a crowd of engineering individuals and analyzed the collected data with data mining techniques. Main findings include the relationships of crowd participation versus process, product, and reward factors as well as regression models to predict crowd participation.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.9
• /
• pp.103-115
• /
• 2014

In this paper, we propose UniBAS(Unified Bug Analysis System) to provide a unified repository model by integrating the extracted data from the heterogeneous bug tracking systems. The UniBAS reduces the cost and complexity of the MSR(Mining Software Repositories) research process and enables the researchers to focus on their logics rather than the tedious and repeated works such as extracting repositories, processing data and building analysis models. Additionally, the system not only extracts the data but also automatically generates database tables, views and stored procedures which are required for the researchers to perform query-based analysis easily. It can also generate various types of exported files for utilizing external analysis tools or managing research data. A case study of detecting duplicate bug reports from the Firfox project of the Mozilla site has been performed based on the UniBAS in order to evaluate the usefulness of the system. The results of the experiments with various algorithms of natural language processing and flexible querying to the automatically extracted data also showed the effectiveness of the proposed system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.12B
• /
• pp.1509-1521
• /
• 2011

WfMC, which is one of the international standardization organizations leading the business process and workflow technologies, has been officially released the BPAF1.0 that is a standard format to record process instances' event logs according as the business process intelligence mining technologies have recently issued in the business process and workflow literature. The business process mining technologies consist of two groups of algorithms and their analysis techniques; one is to rediscover flow-oriented process-intelligence, such as control-flow, data-flow, role-flow, and actor-flow intelligence, from process instances' event logs, and the other has something to do with rediscovering relation-oriented process-intelligence like process-driven social networks and process-driven affiliation networks from the event logs. The current standardized format of BPAF1.0 aims at only supporting the control-flow oriented process-intelligence mining techniques, and so it is unable to properly support the relation-oriented process-intelligence mining techniques. Therefore, this paper tries to extend the BPAF1.0 so as to reasonably support the relation-oriented process-intelligence mining techniques, and the extended BPAF is termed BPAF2.0. Particularly, we have a plan to standardize the extended BPAF2.0 as not only the national standard specifications through the e-Business project group of TTA, but also the international standard specifications of WfMC.

• The Journal of the Korea Contents Association
• /
• v.21 no.6
• /
• pp.306-317
• /
• 2021

With a global shift from carbon economy towards hydrogen economy, leading countries such as the U.S., Europe, China, and Japan are focusing their research capabilities on hydrogen research and development(R&D) by announcing various hydrogen economy policies. South Korea also has been following this global trend by announcing hydrogen economy roadmap in January 2019 and legislating hydrogen economy related law. In this paper, we tried to figure out the national R&D trend of Fuel Cell Electric Vehicle(FCEV) and its knowledge structure by using recent 10-year project data of National Technology and Information Service(NTIS). We collected 1,479 FCEV-related projects and conducted text mining and network analysis. According to the analysis, FCEV-related R&D has been actively carried out over the entire process of hydrogen production, transport, storage, and utilization. Furthermore, the paper provides insights into the government's policy agenda building and market strategy on the hydrogen economy.