• 제어로봇시스템학회논문지
• /
• 제17권10호
• /
• pp.1059-1066
• /
• 2011

This paper makes a close inquiry into ill-conditioning that may be occurred in wireless localization of the sensor nodes based on network signals in the wireless sensor network and provides the clue for solving the problem. In order to estimate the location of a node based on the range information calculated using the signal propagation time, LS (Least Squares) method is usually used. The LS method estimates the solution that makes the squared estimation error minimal. When a nonlinear function is used for the wireless localization, ILS (Iterative Least Squares) method is used. The ILS method process the LS method iteratively after linearizing the nonlinear function at the initial nominal point. This method, however, has a problem that the final solution may converge into a LM (Local Minimum) instead of a GM (Global Minimum) according to the deployment of the fixed nodes and the initial nominal point. The conditions that cause the problem are explained and an adaptive method is presented to solve it, in this paper. It can be expected that the stable location solution can be provided in implementation of the wireless localization methods based on the results of this paper.

• Imaging Science in Dentistry
• /
• 제35권2호
• /
• pp.87-90
• /
• 2005

Purpose : The purpose of this study was to investigate variability of doses with same exposure parameters and evaluate radiographic density according to the variability of doses. Materials and methods Twenty-eight MAX-GLS (Shinhung Co, Seoul, Korea), twenty-one D-60-5 (DongSeo Med, Seoul, Korea), and eleven REX-601 (Yoshida Dental MFG, Tokyo, Japan) dental x-ray machines were selected for this study Surface doses were measured under selected combinations of tube voltage, tube current, exposure time, and constant distance 42 cm from the focal spot to the surface of the Multi-O-meter (Unfors Instruments, Billdal, Sweden). Radiographic densities were measured on the films at maximum, minimum and mean surface doses of each brand of x-ray units. Results With MAX-GLS, the maximum surface doses were thirteen to fourteen times as much as the minimum surface doses. With D-60-S, the maximum surface doses were three to eight times as much as the minimum surface doses. With REX-601, the maximum surface doses were six to ten times as much as the minimum surface doses. The differences in radiographic densities among maximum, mean, and minimum doses were significant (p<0.01). Conclusion : The surface exposure doses of each x-ray machine at the same exposure parameters were different within the same manufacturer's machines.

• 한국가스학회지
• /
• 제16권2호
• /
• pp.45-51
• /
• 2012

최소자연발화온도는 가연성혼합물이 화염이나 스파크 없이 주위로부터 충분한 열에너지를 받아서 스스로 발화하는 최저온도를 말한다. 본 연구에서는 ASTM E659 장치를 이용하여 가연성 혼합물인 n-Pentanol+Ethylbenzene계를 구성하는 순수물질과 혼합물의 최소자연발화온도를 측정하였다. Pentanol과 Ethylbenzene의 측정된 최소자연발화온도는 각 각 $285^{\circ}C$, $475^{\circ}C$ 였다. 그리고 n-Pentanol+Ethylbenzene 계의 예측된 최소자연발화온도는 실험값과 적은 평균절대오차에서 일치하였다.

• 대한교통학회:학술대회논문집
• /
• 대한교통학회 1999년도 제36회 학술발표회논문집
• /
• pp.458-462
• /
• 1999

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1998년도 한국우주과학회보 제7권1호
• /
• pp.40.1-40
• /
• 1998

No Abstract.See Full-text

• 대한수학회논문집
• /
• 제7권2호
• /
• pp.313-324
• /
• 1992

• 한국진공학회지
• /
• 제8권2호
• /
• pp.102-110
• /
• 1999

The LIGA X-ray exposure step was modelled into three inequalities, by assuming that the X-ray energy attenuated within a resist is deposited only in the localized range of the resist. From these inequalities, equations for the minimum and maximum exposure times required for a good quality microstructure were obtained. Also, an equation for the thickness of an X-ray mask absorber was obtained from the exposure requirement of threshold dose deposition. The calculation method of the synchrotron radiation power from a synchrotron radiation source was introduced and applied to an X-ray exposure step. A power from a synchrotron radiation source was introduced and applied to an X-ray exposure step/ A power function of photon energy, approximating the attenuation length of the representative LIGA resist, PMMA, and the mean photon energy of the XZ-rays incident upon an X-ray mask absorber were applied to the above mentioned equations. Consequently, the tendencies of the minimum and maximum exposure and with respect to mean photon energy and thick ness of PMMA was obtained. Additionally, the tendencies of the necessary thickness of PMMA and photon energy of the X-ray mask absorber with respect to thickness of PMMA and photon energy of the X-rays incident upon an X-ray mask absorber were examined. The minimum exposure time increases monotonically with increasing mean photon energy for the same total power density and is not a function of the thickness of resist. The minimum exposure time increases with increasing mean photon energy for the same total power density in the case of the general LIGA process, where the thickness of PMMA is thinner than the attenuation length of PMMA. Additionally, the minimum exposure time increases monotonically with increasing thickness of PMMA. The maximally exposable thickness of resist is proportional to the attenuation length of the resist at the mean photon energy with its proportional constant of ln $(Dd_m/D_{dv})$. The necessary thickness of a gold X-ray mask absorber due to absorption edges of gold, increases smoothly with increasing PMMA thickness ratio, and is independent of the total power density itself. The simplicity of the derived equations has made clearly understandable the X-ray exposure phenomenon and the correlation among the exposure times, the attenuation coefficient and the thickness of an X-ray mask absorber, the attenuation coefficient and the thickness of the resist, and the synchrotron radiation power density.

• 한국환경과학회지
• /
• 제22권6호
• /
• pp.667-677
• /
• 2013

This study aims to examine the actual status of the urban heat island in Daegu by analyzing the data of 17 automatic weather stations installed in the Daegu area. And the results can be summarized as follows: First, regarding the temperature distribution in Daegu by summer time zones, for the 31 days(August 1st till 31st), 18 days showed daily maximum temperature over $30^{\circ}C$, and 11 days indicated daily minimum temperature over $25^{\circ}C$. The day that showed the highest daily maximum temperature was August 5th, which indicated $36^{\circ}C$. Second, about the spatial distribution of time ratio exceeding $30^{\circ}C$ and $25^{\circ}C$, the area with the highest time ratio exceeding $30^{\circ}C$ is mostly the downtown(central area), eastern area, and northern area. Meanwhile, regarding the time ratio exceeding $25^{\circ}C$, the downtown area centering around the central area were high as over 70%, and the outskirts were low as under 65%. Third, considering the temporal distribution of daily maximum temperature and daily minimum temperature, daily maximum temperature was shown around 14:00 to 15:00 while the daily minimum temperature was indicated around 17:00 to 18:00. Daily maximum and minimum temperature were appeared at northeast and downtown, respectively. Fourth, regarding the spatial distribution of tropical days and tropical night days, tropical days showed 77% and tropical night days indicated 42% before and after the 24th and also the 13th each. Tropical days were occurred up to 24 days at northeastern area. And the southwestern area of Daegu showed under 22 days. The downtown showed the 14 days of the tropical night. However, the outskirts indicated relatively few days as under 10 days. Fifth, about the spatial distribution of the average daily temperature range (the difference between the highest temperature and lowest temperature), the central area, the central part of the city, showed the smallest as $7.2^{\circ}C$, and as it was closer to the northern area, it became larger, so in the eastern and northern area, it was over $8.8^{\circ}C$ or so.

• 전자공학회논문지D
• /
• 제36D권10호
• /
• pp.61-70
• /
• 1999

본 논문에서는 균일한 다중 홀로그램을 얻기 위한 몇 가지 노출 시간 계획을 분석하고 실험을 통해 $LiNbO_3$:Fe(0.015wt%) 결정에 기록된 홀로그램의 회절 효율을 측정하였다. 높은 각도 분해능을 갖는 시스템 (최소 각도 : $0.0028^{\circ}$)을 이용하여 두 입사빔의 세기비와 최소 단위의 다중화 각도가 정밀하게 조사되었다. 초기 기록시간, 전체 노출시간, 그리고 시간상수를 고려하여 100개의 회절분포(0.014 ${\pm}$ 0.005%)를 측정하였으며, 330개의 아날로그 영상을 동일한 장소에 기록하였다. 또한 공간 다중화를 통해 총 500개 이상의 홀로그램이 재생되었다.

• 한국통신학회논문지
• /
• 제19권3호
• /
• pp.543-552
• /
• 1994

음성 인식에서의 dynamic time warp (DTW)은 반복적 계산을 필요로 하며, 이 계산을 수행하기에 합당한 PE cell의 설계는 매우 중요하다. 따라서 이 연구에서는 실시간 어휘 인식을 가능하게 하는 대사전 규모의 대어휘 고립단어인식용 DTW알고리즘을 하드웨어로 구현하기위한 PE(Processing Element)소자의 설계에 주안점을 두었다. 이 DTW용 PE 소자를 크게 세가지의 블록으로 대별된다. 즉, “MIN" block, "ADD" block 그리고 ”ABS" block인데, “MIN"은 축적 최소거리를 계산하기 위한 블록이고, ”ADD"는 이들 최소거리들의 합을 계산하는 블록, 그리고 “ABS"는 이러한 합에 의한 국부거리를 절대값을 구하기 위한 블록이다. 본 연구에서는 이들 세가지 전체 블록회로의 설계 및 검증을 행하였으며, 1.2 m CMOS N-well 설계 규칙에 EK라 전체블록에 대한 레이아웃을 행한 후 설계 규칙 검사(DRC)를 마쳤다.에 대한 레이아웃을 행한 후 설계 규칙 검사(DRC)를 마쳤다.