• 한국지하수토양환경학회지:지하수토양환경
• /
• 제11권3호
• /
• pp.52-58
• /
• 2006

Kim and Lee(2005)는 기존의 지하수위 변동법과는 달리 지진학에서 관측된 지진파 자료로부터 진원에서의 최초 파형을 추정하기 위해 제안된 방법인 Minimum Entropy Deconvolution(MED) 방법을 이용하여 지하수 함양량의 시간적 변화의 추정 가능성을 검토하였다. 하지만, 이 연구는 MED 자체의 적용 기능성에 대한 검토만을 다루고 있을 뿐, 다양한 경우에 대한 고려는 사실상 이루어지지 않고 있다. 따라서 본 연구에서는 함양지의 공간적 분포 및 함양지와 수위 관측지점 간의 공간적 분포에 따라 ME 적용성이 어떻게 달라지는가를 살펴보고자 하였다. 이를 위해 전체 수치모의 영역의 일부에만 지하수 함양량을 적용하고, 함양지로부터 거리에 따라 수치모의 결과를 모니터링 하였다. 이 때 적용된 수리전도도 분포는 균질한 경우와, 수리전도도의 난수장의 경우 두가지를 적용하였다. 각각의 수치모의 결과에 MED 를 적용하여 상대 지하수함양량의 시계열을 추정하고, 이 결과를 원래 가정한 지하수 함양량의 시계열과 상호상관성을 이용하여 비교하였다. 이 때 거의 모든 추정값은 원래 가정한 함양량의 시계열과 0.8 이상의 상호상관성을 보여 주었다. 이와 함께, 필터 길이의 불리적, 수학적 의미를 함께 살펴보았는데, 이를 통해 필터의 길이는 지하수위 변화의 겉보기 모양과 함양지로부터의 거리와 밀접히 관련되는 것을 확인하였다.

• Journal of the Korean Data and Information Science Society
• /
• 제14권1호
• /
• pp.55-65
• /
• 2003

In this study, we systemize the theoretical validity for applying unrelated question model to three-stage cluster sampling method and derive the estimate and it's variance of sensitive parameter. We derive the minimum variance form under the optimal values of the subsample sizes when the cost are fixed. Under the some given precision, we obtain the optimal values of the subsample sizes and derive the minimum cost form by using them.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.124-126
• /
• 1989

Inverse kinematic problem is a crucial point for robot manipulator control. In this paper, to implement the Jacobian control technique we used the Hopfield(Tank)'s neural network. The states of neurons represent joint veocities, and the connection weights are determined from the current value of the Jacobian matrix. The network energy function is constructed so that its minimum corresponds to the minimum least square error. At each sampling time, connection weights and neuron states are updated according to current joint position. Inverse kinematic solution to the planar redundant manipulator is solved by computer simulation.

• Journal of Electrical Engineering and Technology
• /
• 제12권6호
• /
• pp.2106-2117
• /
• 2017

An effective statistical feature extraction approach of data sampling of fault in the combined transmission system is presented in this paper. The proposed algorithm leads to high accuracy at minimum cost to predict fault location and fault type classification. This algorithm requires impedance measurement data from one end of the transmission line. Modal decomposition is used to extract positive sequence impedance. Then, the fault signal is decomposed by using discrete wavelet transform. Statistical sampling is used to extract appropriate fault features as benchmark of decomposed signal to train classifier. Support Vector Machine (SVM) is used to illustrate the performance of statistical sampling performance. The overall time of sampling is not exceeding 1 1/4 cycles, taking into account the interval time. The proposed method takes two steps of sampling. The first step takes 3/4 cycle of during-fault and the second step takes 1/4 cycle of post fault impedance. The interval time between the two steps is assumed to be 1/4 cycle. Extensive studies using MATLAB software show accurate fault location estimation and fault type classification of the proposed method. The classifier result is presented and compared with well-established travelling wave methods and the performance of the algorithms are analyzed and discussed.

• 품질경영학회지
• /
• 제24권4호
• /
• pp.207-223
• /
• 1996

These days, customers have attached great importance to the function of product liability and quality assurance. In Korea, the single rectifying sampling inspection for attribute (KS A 3105) has been used. But this inspection plan given by tables (KS A 3105) has some defects. There are limitations in the range of applications and irrationality of approximate probability and the double rectifying sampling inspection is not mentioned. Moreover, ATI (average total inspection) does not reflect sampling costs and the loss of nonconforming item. Therefore, the objectives of this study is to develope new algorithms and computer program that provide the optimal sampling inspection plan based on minimum linear costs (single & double inspection plan). The result of this study revealed that the new algorithm is less than KS A 3105 in ATI and basically, double inspection plan is more economical. Also it comes over restrictions in KS A 3105. So, it is definite that the optimal solution can be obtained considering cost factors in manufacturing and sampling process, and costs can be saved in the long term.

• 대한의용생체공학회:의공학회지
• /
• 제19권2호
• /
• pp.143-152
• /
• 1998

In this paper, we present the performances of a Doppler system using single channel RF(Radio Frequency) sampling. This technique consists of undersampling the ultrasonic blood backscattered RF signal on a single channel. Conventional undersampling method in Doppler imaging system have to use a minimum of two identical parallel demodulation channels to reconstruct the multigate analytic Doppler signal. However, this system suffers from hardware complexity and problem of unbalance(gain and phase) between the channels. In order to reduce these problems, we have realized a multigate pulsed Doppler system using undersampling on a single channel, It requires sampling frequency at $4f_o$(where $f_o$ is the center frequency of the transducer) and 12bits A/D converter. The proposed " single-Channel RF Sampling" method aims to decrease the required sampling frequency proportionally to $4f_o$/(2k+1). To show the influence of the factor k on the measurements, we have compared the velocity profiles obtained in vitro and in vivo for different intersequence delays time (k=0 to 10). We have used a 4MHz center frequency transducer and a Phantom Doppler system with a laminar stationary flow. The axial and volumetric velocity profiles in the vessel have been computed according to factor k and have been compared. The influence of the angle between the ultrasonic beam and the flow axis direction, and the fluid viscosity on the velocity profiles obtained for different values of k factor is presented. For experiment in vivo on the carotid, we have used a data acquisition system with a sampling frequency of 20MHz and a dynamic range of 12bits. We have compared the axial velocity profiles in systole and diastole phase obtained for single channel RF sampling factor.ng factor.

• Communications for Statistical Applications and Methods
• /
• 제18권4호
• /
• pp.403-411
• /
• 2011

This paper deals with a group acceptance sampling plan for time truncated tests which are based on the total number of failures from the whole group assuming that the life time of an item follows the Dagum (inverse Burr) distribution. This study is developed when a multiple number of items as a group can be tested simultaneously in a tester. The minimum number of groups required for a given group size and acceptance number is determined such that the producer and consumer risks are satisfied simultaneously at the specified quality level, while the termination time and the number of testers are specified. Comparisons are made between the proposed plan and the existing plan on the basis of size of the groups. Two real examples are provided.

• 한국멀티미디어학회논문지
• /
• 제20권7호
• /
• pp.1004-1013
• /
• 2017

This paper presents a relationship between the number of curves and geometric parameters of a 3D object. Once the relationship is established, the number of closed curves that can reliably represent 3D object is derived. Inspired by Shannon-Nyquist Sampling Theorem, in this paper, approach for sampling rate (defined as the minimum number of curves) for 3D reconstruction is proposed. The relationship is straightforward, is suitable for application to 3D object overlaid with closed-continuous curves, and can achieve efficient 3D reconstruction system in practice. To substantiate the proposed approach, simulation results are provided and the results show that the number of curves can be decreased without loss of generality of characteristics of a target 3D object.

• 대한안전경영과학회지
• /
• 제9권2호
• /
• pp.123-134
• /
• 2007

This paper focuses on the in-house reliability assurance plan for the bulk materials of each company. The reliability assurance needs in essence a long time and high cost for testing the materials. In order to reduce the time and cost, accelerated life test is adopted. The bulk sampling technique was used for acceptance. Design parameters might be total sample size(segments and increments}, stress level and so on. We focus on deciding the sample size by minimizing the asymptotic variance of test statistics as well as satisfying the consumer's risk. In bulk sampling, we also induce the sample size by adapting the normal life time distribution model when the variable of the lognormal life time distribution is transformed and adapted to the model. In addition, the sample size for both the segments and increments can be induced by minimizing the asymptotic variance of test statistics of the segments and increments with consumer's risk met. We can assure the reliability of the mean life and B100p life time of the bulk materials by using the calculated minimum sample size.

• 한국통신학회논문지
• /
• 제28권11B호
• /
• pp.1038-1049
• /
• 2003

트래픽 부하 측정은 네트웍 트래픽 엔지니어링의 기반이 된다. 그러나 고속 링크에서 트래픽 부하 정보를 얻기 위해 모든 패킷을 측정하는 것은, 라우터의 패킷 포워딩 성능을 저해시키므로 확장성이 결여된다. 이에 따라 샘플링 기법이 트래픽 측정의 대안으로 제시되었다. 샘플링은 라우터의 성능 저해를 최소화시킬 수 있으나 샘플링으로 예측되는 트래픽 부하는 실제 트래픽 부하와 차이를 보이게 되며, 이와 같은 오류가 제한되지 못한다면 측정값을 기반으로 하는 응용들에 부영향을 미치게 된다. 본 논문에서는 샘플링 오류를 오류 허용범위 내로 제한시킬 수 있는 적응성 있는 패킷 샘플링 기법을 제안한다. 제안 기법은 수학적 분석을 통해 얻어진 부하 예측 오류에 영향을 미치는 주요 트래픽 파라메터를 각 블록의 시작마다 예측하여 샘플링 확률을 동적으로 적응시킨다. 본 논문에서는 또한 실제 측정된 인터넷 트래픽을 이용하여 제안 기법의 확장성과 성능을 검증하였다