• Journal of Practical Agriculture & Fisheries Research
• /
• v.21 no.1
• /
• pp.61-70
• /
• 2019

"Jungmo2510", a rye cultivar, Secale cereal L., was developed by National Institute of Crop Science, RDA in 2015. It was developed from open pollination from within 10 rye cultivars or lines including "Chochun" in 1995. The line "SR95POP-S1-523-1-5-5-4-7-3-B-16-3-19" was selected for its excellent agronomic appearance and was placed in yield trials for two years from 2011 to 2012. The line was designated "Homil55" and was placed in regional yield trials at the four locations around Korea from 2013 to 2015, during which time the name "Jungmo2510" was given. This cultivar is an erect plant type and leaves of short and broad size with a green color, a yellow colored, medium-diameter culm, and a yellowish brown-colored, medium-size grain. The heading date of "Jungmo2510" was April 16, which were 2 days earlier than that of "Gogu". "Jungmo2510" also showed similar to winter hardiness and greater resistance to lodging compared to those of the check cultivar. Over three years, the average dry matter yield of "Jungmo2510" was 802 kg 10a^-1 , which was harvested in late April and was lower than that of the check cultivar "Gogu" (825 kg). The seed productivity of "Jungmo2510" was approximately 481 kg 10a^-1 , which was 2.4% less than that of the check. "Jungmo2510" was higher to than "Gogu" in term of protein content (9.1% and 8.0%, respectively), total digestible nutrients(TDN)(57.5% and 55.5%, respectively), and TDN yield 10a^-1(419 kg and 392 kg, respectively). This cultivar is recommended as a fall sowing crop in areas where the average daily minimum-mean temperatures are higher than -12 ℃ in January, and as a winter crop for whole-crop forage before the planting of rice or green manure around Korea.

• Tuberculosis and Respiratory Diseases
• /
• v.45 no.4
• /
• pp.813-822
• /
• 1998

Background: Extubation is recommended to be performed at minimum pressure support (PSmin) during the pressure support ventilation (PSV). In field, physicians sometimes perform additional 1 hr T-piece trial to the patient at PSmin to reduce re-intubation risk. Although it provides confirmation of patient's breathing reserve, weaning could be delayed due to increased airway resistance by endotracheal tube. Methods: To investigate the effect of additional 1 hr T-piece trial on weaning outcome, a prospective study was done in consecutive 44 patients who had received mechanical ventilation more than 3 days. Respiratory mechanics, hemodymic, and gas exchange measurements were done and the level of PSmin was calculated using the equation (PSmin=peak inspiratory flow rate $\times$ total ventilatory system resistance) at the 15cm $H_2O$ of pressure support. At PSmin, the patients were randomized into intervention (additional 1 hr T-piece trial) and control (extubation at PSmin). The measurements were repeated at PSmm, during weaning process (in cases of intervention), and after extubation. The weaning success was defined as spontaneous breathing more than 48hr after extubation. In intervention group, failure to continue weaning process was also considered as weaning failure. Results: Thirty-six patients with 42 times weaning trial were satisfied to the protocol. Mean PSmin level was 7.6 (${\pm}1.9$)cm $H_2O$. There were no differences in total ventilation times (TVT), APACHE III score, nutritional indices, and respiratory mechanics at PSmin between 2 groups. The weaning success rate and re-intubation rate were not different between intervention group (55% and 18% in each) and control group (70% and 20% in each) at first weaning trial. Work of breathing, pressure time product, and tidal volume were aggravated during 1 hr T-piece trial compared to those of PSmin in intervention group ($10.4{\pm}1.25$ and $1.66{\pm}1.08$ J/L in work of breathing) ($191{\pm}232$ and $287{\pm}217$cm $H_2O$ s/m in pressure time product) ($0.33{\pm}0.09$ and $0.29{\pm}0.09$ L in tidal volume) (P<0.05 in each). As in whole, TVT, and tidal volume at PSmin were significantly different between the patients with weaning success ($246{\pm}195$ hr, $0.43{\pm}0.11$ L) and the those with weaning failure ($407{\pm}248$ hr, $0.35{\pm}0.10$L) (P<0.05 in each). Conclusion : There were no advantage to weaning outcome by addition of 1 hr T-piece trial compared to prompt extubation to the patient at PS min.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.2
• /
• pp.130-137
• /
• 2017

Due to the economic growth and development of construction technology, a role of foundation to resist heavy loads has been increased. In this present study to improve the structural performance of reinforced concrete pile, the precast HPC pile reinforced with rebar and filling concrete was developed and the strength of pile was predicted based on the limit state design method. The safety of HPC pile strength was evaluated by comparing with the design values. The geometry of HPC pile is a decagon cross section with a maximum width of 500 mm and a minimum width of 475 mm, and the hollow head of pile thickness is 70 mm. The inner area of the hollow head part was made as the square ribbed shape presented in the limit state design code in order to achieve horizontal shear strength between pile concrete and filling concrete. From the shear test results, it was found that the stable shear strength were secured without abrupt failure until maximum load stage despite the shear cracks was found. Shear strength is 135% and 119% higher than that of design value calculated from limit state design code. The driving test results of HPC pile according to the presence of additional reinforcement showed the outstanding crack resistance against impact loads condition. From the bending test results the flexural load between PHC pile and HPC pile was 1.51 times and 1.48 times higher than that of the design flexural load of conventional PHC pile.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.5
• /
• pp.71-77
• /
• 2009

In a range of forms, such as latex, water-soluble polymer, liquid resin, and monomer, polymer dispersions have been widely used in the construction industry as cement modifiers because of their excellent properties, such as acid-resistance, water-proofness, and good ductility in mortar and concrete. Polymer cement slurry (polymer-modified slurry) is made of cement and polymer dispersions, with a high polymer-cement ratio of 50% or more. The purpose of this study is to evaluate the water permeability and drying shrinkage of polymer cement mortar (polymer-modified mortar) and cement concrete coated by polymer cement slurry. The polymer cement mortar and cement concrete are prepared with various polymer types, polymer-cement ratios and curing methods, and are tested for water permeability, drying shrinkage and strength. The test results showed thatthe weight of permeable water of polymer cement mortar decreases with an increase in the polymer-cement ratio, reaching a minimum at the polymer-cement ratio of 20%. In particular, the weight of permeable water of St/BA-modified mortar with a polymer-cement ratio of 20% coated with St/BA-modified slurry is about 1/55 that of unmodified mortar. The EVA- and St/BA-modified slurries coated on cement concrete have about 4 or 5 times higher drying shrinkage compared to cement concrete. The strength of polymer cement mortars tends to increase with a higher polymer-cement ratio, and is considerably higher than that of unmodified mortar. It is thus concluded that polymer cement mortars coated by polymer cement slurry are effective for industrial application, and have superior properties such as waterproofness and strengths, compared with conventional cement mortar.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.21 no.1
• /
• pp.15-29
• /
• 2009

Most breakwater armor blocks are designed by using Hudson's or van der Meer's formula. The minimum weight of armor blocks is calculated by equating the resistance to the load in each formula. The larger value is then chosen as the design weight. In this study, we have performed reliability analyses for thus designed breakwater armor blocks of 12 trade harbors and 8 coastal harbors in Korea. The probability of failure calculated by the reliability analysis provides a criterion for evaluating the stability of armor blocks. The calculated probability of failure was almost same for all the breakwaters so that we were able to quantitatively evaluate the safety level of armor blocks of existing breakwaters. We also found that the safety factor used in the deterministic design method and the probability of failure in the reliability design method show a linear relationship. Therefore the probability of failure of existing breakwaters can be quantitatively calculated from the safety factors. The calculated probability of failure could also be used for determining the target probability of failure in the future.

• The korean journal of orthodontics
• /
• v.40 no.2
• /
• pp.66-76
• /
• 2010

Objective: Obstructive sleep apnea (OSA) is a common disorder which is characterized by a recurrence of entire or partial collapse of the pharyngeal airway during sleep. A given tidal volume must traverse the soft tissue tube structure of the upper airway, so the tendency for airway obstruction is influenced by the geometries of the duct and characteristics of the airflow in respect to fluid dynamics. Methods: Individualized 3D FEA models were reconstructed from pretreatment computerized tomogram images of three patients with obstructive sleep apnea. 3D computational fluid dynamics analysis was used to observe the effect of airway geometry on the flow velocity, negative pressure and pressure drop in the upper airway at an inspiration flow rate of 170, 200, and 230 ml/s per nostril. Results: In all 3 models, large airflow velocity and negative pressure were observed around the section of minimum area (SMA), the region which narrows around the velopharynx and oropharynx. The bigger the Out-A (outlet area)/ SMA-A (SMA area) ratio, the greater was the change in airflow velocity and negative pressure. Conclusions: Pressure drop meaning the difference between highest pressure at nostril and lowest pressure at SMA, is a good indicator for upper airway resistance which increased more as the airflow volume was increased.

• Food Science and Preservation
• /
• v.6 no.2
• /
• pp.161-166
• /
• 1999

In order to increase the Korean wheat-cultivators' incomes as well as to promote their consumptions, the native wheat of 11 varities (Chokwangmil, Geurumil, Eunpamil, Tapdongmil, Woorimil, Olgeurumil, Alchanmil , Gobunmil, Geungangmil Seodunmil and Suwon 265) were investigated on dough properties to compared with those of two imported wheat varieties, DNS (Dark Northern Spring Wheat) and ASW (Austrlian Standard White). In dough stickiness, Chokwangmil was highest as 81.78, and the mean value of native wheat was 53.98 g. ASW and DNS showed the stickiness values of 58.7 g and 52.9 g, respectively. Tapdongmil was highest in the tensile tone of dough as 87.6 g. In the texture test, the highest elasticity, gumminess, firmness and chewiness were observed in Woorimil as values of 0.980, 1,022.8, 1,562.7 and 1,001.9, respectively, while the highest cohesiveness and adhesiveness were obtained from Suwon 265 and Geurumil, respectively, as 0.710 and -609.4. In amylogram properties, the initial gelatinization temperature was ranged from 65$^{\circ}C$ to 69$^{\circ}C$, and maximum, minimum and final viscosities were highest in Woorimil as 1,140, 1,100 and 1,730 BU, respectively. In farinogram, water absorption rate was highest in Suwon 265 as 65.1%, which required the longest dough arrival time of 3.5 min. Dough developing time, weakening and stability were longest in Gobunmil as 9.7. 32.1 and 29.9 min., respectively. The resistance of dough was highest in Olgeurumil as 110 BU.

• Journal of Environmental Impact Assessment
• /
• v.23 no.6
• /
• pp.417-431
• /
• 2014

There is a Conjoint Analysis to estimate the environmental value of natural river restoration project of Inchon Metropolitan City's small River: Gong-chon Stream, Gul-po Stream, Seung-gi Stream, Jang-su Stream. In order to find out the optimal expense condition, we tried to estimate the possible payable amount. According to the analysis, almost all people are willing to pay 15,000 Won. In case of the river types, the people liked 10 cm's depth of water and there should be brook trail, convenient facilities and flood plain at the stream edge space. But it is impossible to build these facilities with minimum fare 15,000 Won per a household. If the necessary expenses set high, the tax resistance of the local residents will be increased. So, in consideration of the analytical results of the attribute level, we draw five alternatives. This study is based on the results of Incheon metropolitan City residents' survey, and there is Conjoint Analysis to estimate the environmental value of natural-type river project of Incheon metropolitan City. If it is reflected the special assume factors of this study, and if there is exact environmental value estimation of the various river quality through different analysis, then it will become a study of high utilizing.

• Journal of Food Hygiene and Safety
• /
• v.29 no.3
• /
• pp.223-227
• /
• 2014

This study was investigated to determine the prevalence of methicillin-resistant Staphylococcus aureus (MRSA) isolated from raw milk samples and to further study on the molecular characteristics of the MRSA isolates. Using Staphylococcus Medium 110, Staphylococcus spp. were isolated from raw milk samples and further identification was carried by Vitek2 system. Minimum inhibitory concentrations (MICs) of antibiotics were conducted by serial dilution method according to the Clinical Laboratory Standards Institute (CLSI) guideline. For the detection of resistance genes and molecular characterization, PCR reaction was performed by gene specific primers and followed by DNA sequencing. Of the 698 milk samples, 94 Staphylococcus aureus (S. aureus) were identified (94 S. aureus/286 Staphylococcus spp.). Of the 94 S. aureus, seven isolates have mecA, a methicillin resistant gene. mecA positive seven isolates were then characterized by staphylococcal cassette chromosome mec (SCCmec) typing, and Panton-Valentine Leukocidin (pvl) gene using PCR. All of mecA positive isolates were resistant to ampicillin and oxacillin, but sensitive to teicoplanin, vancomycin and ciprofloxacin. One of seven isolates was SCCmec type II and six isolates were type IV and all seven isolates were pvl gene negative.

• ALGAE
• /
• v.29 no.1
• /
• pp.47-55
• /
• 2014

To develop effective and safe acne vulgaris therapies with a continuing demand for new solutions, we investigated unique efficacy of an antibacterial agent from marine brown alga Eisenia bicyclis in treating acne vulgaris. The methanolic extract of E. bicyclis exhibited potential antibacterial activity against acne-related bacteria. The ethyl acetate fraction showed the strongest antibacterial activity against the bacteria among solvent fractions. Six compounds (1-6), previously isolated from the ethyl acetate fraction of E. bicyclis, were evaluated for antibacterial activity against acne-related bacteria. Among them, compound 2 (fucofuroeckol-A [FF]) exhibited the highest antibacterial activity against acne-related bacteria with a minimum inhibitory concentration (MIC) ranging from 32 to $128{\mu}g\;mL^{-1}$. Furthermore, FF clearly reversed the high-level erythromycin and lincomycin resistance of Propionibacterium acnes. The MIC values of erythromycin against P. acnes were dramatically reduced from 2,048 to $1.0{\mu}g\;mL^{-1}$ in combination with MIC of FF ($64{\mu}g\;mL^{-1}$). The fractional inhibitory concentration indices of erythromycin and lincomycin were measured from 0.500 to 0.751 in combination with 32 or $64{\mu}g\;mL^{-1}$ of FF against all tested P. acnes strains, suggesting that FF-erythromycin and FF-lincomycin combinations exert a weak synergistic effect against P. acnes. The results of this study suggest that the compounds derived from E. bicyclis can be a potential source of natural antibacterial agents and a pharmaceutical component against acnerelated bacteria.