• Proceedings of the Korean Magnestics Society Conference
• /
• 2000.09a
• /
• pp.492-499
• /
• 2000

Co-Ni-Fe-N thin films were fabricated by a N$\sub$2/ reactive rf magnetron sputtering method. The nitrogen partial pressure (P$\sub$N2/) was varied in the range of 0∼10%. As P$\sub$N2/ increases in this range, the saturation magnetization (B$\sub$s/) linearly decreases from 19.8 kG to 14 kG and the electrical resistivity ($\rho$) increased from 27 to 155 ${\mu}$$\Omega$cm. The coercivity (H$\sub$c/) exhibits the minimum value at 4% of P$\sub$N2/. The magnetic anisotropy (H$\sub$k/) are in the range of 20∼50 Oe. High frequency characteristics of (Co$\sub$22.2/Ni$\sub$27.6/Fe$\sub$50.2/)$\sub$100-x/N$\sub$x/ films are excellent in the range of 3∼5% of P$\sub$N2/. Especially the effective permeability of the film fabricated at 4% of P$\sub$N2/ is 800, which is maintained up to 600 MHz. This film also shows Bs of 17.5 kG, H$\sub$c/ of 1.4 Oe, resistivity of 98 $\Omega$cm and H$\sub$k/ of about 25 Oe. Also, the corrosion resistance of (Co$\sub$22.2/Ni$\sub$27.6/Fe$\sub$50.2/)$\sub$100-x/N$\sub$x/ were improved with the increase in N concentration.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6A
• /
• pp.809-817
• /
• 2008

Recently, the external prestressing method is being much frequently used in strengthening reinforced concrete structures because of it's excellent load resistance and serviceability increases comparing to other strengthening methods. However, it is true that the research on fatigue performance of concrete structures strengthened by the external prestressing using FRP tendons is rare. Therefore, the purpose of this study is to evaluate the safety and feasibility of the external prestressing method by analyzing the characteristics of the reinforced concrete beam strengthening using FRP tendons under repeated loads. Test variables adopted in this experimental study are the types of external prestressing material (steel or FRP tendon) and the repeated load ranges. The repeated load range have the minimum 50% of yield load of reinforced concrete beam and the maximum 70-85%. The test beams are loaded by 4 point loadings with 3 Hz sine wave. From this experimental study, it is confirmed that the reinforced concrete beams strengthened using FRP tendons have sufficient safety against fatigue, especially in FRP tendon itself, tendon at deviators and tendon at anchorages.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.56 no.3
• /
• pp.293-299
• /
• 2023

Acne vulgaris is often associated with acne-related bacteria such as Cutibacterium acnes. In this study, we investigated the antibacterial effects of the methanol extract of the algae Ecklonia cava and its solvent-soluble extract against C. acnes. Among five solvent fractions, the ethyl acetate (EtOAc) fraction exhibited the strongest antibacterial activity against C. acnes. Furthermore, the EtOAc-soluble extract exhibited the highest total phenolic contents among the five solvent fractions tested. The EtOAc subfraction 07 (Fr. 07) extract showed the highest antibacterial effect against C. acnes and isolated C. acnes along with minimum inhibitory concentration (MIC) ranging from 32 to 64 ㎍/mL. Additionally, MICs of antibiotics against antibiotic-resistant C. acnes strains were substantially reduced when antibiotics were combined with Fr. 07, suggesting that Fr. 07 restore the antibacterial activity of the antibiotics. The fractional inhibitory concentration indices clearly revealed an additive synergistic effect of Fr. 07 with antibiotics. The results of the present study suggest a potential role for E. cava in the control of infections related to acne vulgaris.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.11 no.2
• /
• pp.109-116
• /
• 2007

The purpose of this paper is to evaluate the fire resistant performances of load-bearing wall using both composite and steel stud panel infilled with light-weight formed mortar under axial loading according to KS F 2257(1999). The minimum requirement of 2 hours fire resistant rating is needed for the residential and commercial buildings under the fire regulation of Korea. From test results, it is found that two types of specimen composed of the hybrid stud and steel stud panel filled with light-weight formed mortar fited in with the requirement of 2 hours fire resisting rate for the load-bearing wall. In the conclusions, the specimen with hybrid stud shows predominating fire-resistant performance on the adiabatic effects rather than that of the steel stud specimen.

• Journal of Biosystems Engineering
• /
• v.2 no.1
• /
• pp.7-24
• /
• 1977

This paper is the forth and fifth one of the study on balanced type oscillating mole drainer. In the light of the results from previous reports about the model tests, some design criteria were established and a prototype machine was set up for experimental purpose. Motion characteristics and functionof the each parts of the machine were checked and analyzed. After that, performance tests of the prototype machine were carried out in thefield. Obtained results are summarized as follows ; 1. Ten centimeter of the bullet diameter was determined so as to be able to attach it to the tractors with capacity of 30 PS to 40 PS. 2. To maintain the balance between the moments of the front shank and rear shank, the oscillating amplitude of the rear bullet was determined to be larger than that of the front bullet. At the same time , the oscillating direction of the rear bullet was designed with the inclines of ten to thirty degrees. 3. An octagonal dynamo transduced was developed for measuring the compressive force of the upper link is measuring the draft force of the machine. Acceptable linear relationship between forces and strain responses from O.D.T. was obtained. 4. Analysing the balancing mechanism of the acting part of the machine , it was found that the total draft force of the machine was equal to the difference between the sum of the draft force produced from the right and left side bending moments of the lower drawber and the compressive force on the upper link. 5. There are acceptable linear relationship between the strain and twisting moment by driving shaft, and between strain and shank moment. Above results enable us to carry out the field experiment with prototype machine. 6. When the test machine was used in the field, it was possible to reduce the oscillating acceleration by forty percent in average as compared it with the single bullet mole drainer. 7. When the test machine was used under the oscillating condition, the dratt torce was reduced by 27 percent to 59 percent as compared it with the test machine under non-oscillating condition, while the draft force was increased by 7 percent to 20 percent as compared it with the mole drainer having oscillating single bullet. The reasoning behind this fact was considered as the resistance force due to the rear shank and bullet. 8. As the amplitude and frequency of the bullet were increased, the torque was increased accordingly. This tendency could be varied with the various characteristics of the given soils. And the larger frequency and amplitute, the more increasing oscil\ulcornerlating power but decreasing draft brce were needed, and draft force was increased as the velocity was increased.9. When the amplitude of the rear bullet was designed to be larger than that of the front bullet, the minimum value of the moment was lowered and oscillating acceleration was reduced. And when the oscillating direction of the rear bullet was declined back\ulcornerwards, oscillating acceleration was increased along with the increasing angle of decli\ulcornernation. When the test machine was operated in high speed, the difference between maximum moments and minimum ones became narrow. This varying magnitude of moments appeared on the moment oscillogram seems to be correlated to the oscillating acceleration and draft force. 10. From the analysis of variance, it was found that those factors such as frequency, amplitude, and operating velocity significantly affected in the oscillating acceleration, the draft resistance, the torque, the moment, and the total power required. And interaction between frequency and amplitude affected in the oscillating acceleration. 11. Within the given situation of this study, the most preferable operating conditions of the test machine were 7 Hz in oscillating frequency, 0.54 m/sec in operating velocity, and 39.1 mm in oscillating amplitude of front and rear bullets. However, it is necessary to select the proper frequency and magnitude of oscillation depending on the soil properties of the field in which the mole drainer is practiced by use of a bal1nced type oscillating mole drainer. 12. It is recommended that a comparative study of the mole drainers would be performed in the near future using two separate balanced oscillating bullet with the one which is operated by oscillating the movable bullet in a single cylinder or other balanced type which may be single oscillating bullet with spring, damper or balancing weight, and that of thing. To expand the applicability of the balanced type oscillating mole drainer in practical use, it is suggested to develop a new mechanism which perform mole drain with vinyl pipe or filling material such as rice hull.

• Restorative Dentistry and Endodontics
• /
• v.32 no.2
• /
• pp.102-110
• /
• 2007

The purpose of this study was to obtain the basic information for the improvement of dental environment by investigating the presence of methicillin- or vancomycin-resistant Staphylococcus aureus (MRSA or VRSA) isolated from dental health care workers (DHCWs) and environment of the Chosun University Dental Hospital (CUDH) and a private dental clinic (control group). Staphylococcus aureus (S. aureus) was isolated from anterior nares of 42 DHCWS and 38 sites, unit chairss, x-ray devices, computers, etc., at 10 departments of the CUDH and 20 DHCWs and 11 sites at the private dental clinic. S. aureus was isolated on mannitol salt agar plate and confirmed by PCR with S. aureus species-specific primer. Antimicrobial susceptibility test of clinical isolates of S. aureus against several antibiotics including methicillin (oxacillin) was performed by investigating minimum inhibitory concentration (MIC) using broth microdilution assay. In addition, PCR was performed to detect the methicillin- or vancomycin-resistant gene. The data showed that one strain of S. aureus was isolated from DHCWs of the CUDH and three strains of S. aureus was isolated from 3 samples of the private dental clinic, respectively. All of the isolates from the CUDH and the private dental clinic had resistance to penicillin G, amoxicillin and vancomycin and susceptibility to oxacillin and ciprofloxacin. The S. aureus strains were already obtained the resistance to penicillin G and amoxicillin. These results suggest that two dental clinics were under relatively safe environment.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.25 no.4
• /
• pp.33-47
• /
• 2022

Wild boars(Sus scrofa) are expanding their range of behavior as their habitats change. Appearing in urban centers and private houses, it caused various social problems, including damage to crops. In order to prevent damage and effectively manage wild boars, there is a need for ecological research considering the characteristics and movement characteristics of wild boars. The purpose of this study is to analyze home range and identify land cover types in key areas through tracking wild boars, and to predict the movement connectivity of wild boars in consideration of previous studies and their preferred land use characteristics. In this study, from January to June 2021, four wild boars were captured and tracked in Jinju city, Gyeongsangnam-do, and the preferred land cover type of wild boars was identified based on the MCP 100%, KDE 95%, and KDE 50% results. As a result of the analysis of the home range for each individual, it was found that 100% of MCP was about 0.68km², 2.77km², 2.42km², and 0.16km², and the three individuals overlapped the home range, refraining from habitat movement and staying in the preferred area. The core areas were analyzed as about 0.55km², 2.05km², 0.82km², and 0.14km² with KDE 95%., and about 0.011km², 0.033km², 0.004km², and 0.003km² with KDE 50%. When the preferred land cover type of wild boar was confirmed based on the results of analysis of the total home range area and core area that combined all individuals, forests were 55.49% (MCP 100%), 54.00% (KDE 95%), 77.69% (KDE 50%), respectively, with the highest ratio, and the urbanization area, grassland, and agricultural area were relatively high. A connectivity scenario was constructed in which the ratio of the land cover type preferred by the analyzed wild boar was reflected as a weight for the resistance value of the connectivity analysis, and this was compared with the connectivity evaluation results analyzed based on previous studies and wild boar characteristics. When the current density values for the wild boar movement data were compared, the average value of the existing scenario was 2.76, the minimum 1.12, and the maximum 4.36, and the weighted scenario had an average value of 2.84, the minimum 0.96, and the maximum 4.65. It was confirmed that, on average, the probability of movement predictability was about 2.90% better even though the weighted scenario had movement restrictions due to large resistance values. It is expected that the identification of the movement route through the movement connectivity analysis of wild boars can be suggested as an alternative to prevent damage by predicting the point of appearance. In the future, when analyzing the connectivity of species including wild boar, it is judged that it will be effective to use movement data on actual species.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.35 no.1
• /
• pp.57-62
• /
• 2015

"Nokyang" (Hordeum vulgare L.), a new whole-crop silage barley cultivar, was developed by the breeding team at the Department of Rice and Winter Cereal Crop, National Institute of Crop Science, RDA, Korea in 2012. It was derived from combining "Nagyoung" and breeding line "SB77368-B-145". Among the combinations made in 2001, a promising line, "SB01T2017", showed good characteristics in terms of potential forage yield in the yield trial at Iksan from 2007 to 2009. In 2009, the promising line was designated as "Iksan457" and placed in regional yield trials at six locations around Korea for three years from 2010 to 2012, and was released under the name of "Nokyang." It has the growth habit of a group III creeping plant type, with a light-green leaf and common spike. Its average heading and maturing dates were on May 6 and June 4, respectively, which were later than cultivar "Youngyang." "Nokyang" also showed strong winter hardiness, and a resistance to shattering and barley yellow mosaic virus (BaYMV) similar to those of the check cultivar. The best thing among the traits of one is a new good quality with the plant green at the latter growing period. The average forage dry matter (DM) yields in the regional yield trial were about 12.8 and 11.5 MT $ha^{-1}$ in upland and paddy field, respectively, which were higher than those of the check cultivar, by 7% and 2%, respectively. This cultivar would be suitable for an area of the Korean peninsula where the daily minimum temperature in January is above $-8^{\circ}C$.

• Microbiology and Biotechnology Letters
• /
• v.35 no.2
• /
• pp.158-162
• /
• 2007

Methicillin-resistant Staphylococcus aureus (MRSA) is one of a major nosocomial pathogen worldwide and the emergence of this strain has become a major clinical problem. This study was performed for 13 hospitals with more than 400 beds in the country by collecting samples including hands and nasal cavities of doctors, nurses, guardians and patients. Also, additional 320 samples of hands and nasal cavities of 160 community resident in different locations and regions were collected. In all of medical environments and community resident, 625 strains of S. aureus were detected. Among 625 strains of S. aureus, 585 strains(93.6%) showed the resistance to at least one kind of antimicrobial and 112 strains (17.9%) showed multi-drug resistance with the resistance to 4 different types of antimicrobial. Total 152 MRSA strains (24.3%) were isolated from medical environment and community resident. In nasal cavity and hand, 49 MRSA (19.4%) and 103 (27.6%) MRSA were isolated, respectively Minimum inhibitory concentration(MIC) test is used to measure for susceptibility of MRSA isolated to oxacillin. At a concentration $16{\mu}g/ml$ of oxacillin, 11 strains were inhibited. 32 strains at $32{\mu}g/ml$, 41 strains at $64{\mu}g/ml$, 3 strains at $128{\mu}g/ml$, 25 stains at $256{\mu}g/ml$ and 40 strains at over $256{\mu}g/ml$ were inhibited. It was considered that medical environment showed higher than livestock and marine environments in MRSA detection rate.

• Korean Journal of Breeding Science
• /
• v.41 no.3
• /
• pp.349-353
• /
• 2009

We developed a new barley cultivar "Dami" (Hordeum vulgare L.) with the auricleless gene lig (al, li, aur-a). The characteristic of auricleless is a spontaneous mutant type which has known as a monogenic recessive gene. The plant with the gene has erect leaf blades because of no auricle. The cultivar was derived from a cross between 'BGS60' and 'Kangbori'. 'BGS60' has the auricleless gene (li), while 'Kangbori' showed a high biomass with winter hardiness and resistance to BaYMV (Barley Yellow Mosaic Virus). Subsequent generations were handled by the bulk method in a pedigree selection program. A promising line showed both high yield and lodging resistance in the yield trials at Iksan in 2003 to 2004, and designated as Iksan414. The line was subsequently evaluated for winter hardiness, earliness, and yield in the seven locations around Korea for three years from 2005 to 2007 and was designated as "Dami" and released. It has the growth habit of III, erect plant type, green leaf and stem similar to the check cultivar 'Sunwoo' Its heading date was April 30, and maturing date May 31 in paddy field conditions, which were similar to those of 'Sunwoo' respectively. The cultivar Dami was 97 cm in culm length, had 643 spikes per $m^2$ and higher leaf dry weight, and better adaptability to dense planting, winter hardiness, and resistance to BaYMV than the check cultivar did. The average forage yield of "Dami" was about 12 ton $ha^{-1}$ in dry matter (33 ton $ha^{-1}$ in fresh matter) in paddy field. "Dami" also showed 7.5% of crude protein content, 28.5% of ADF (Acid Detergent Fiber), 50.1% of NDF (Neutral Detergent Fiber), and 66.4% of TDN (Total Digestible Nutrients), including higher grade of silage quality for whole crop barley. This cultivar would be suitable for the area where the daily minimum temperature of January is above $-8^{\circ}C$ in Korean peninsula.