• Title/Summary/Keyword: Minimum effective temperature

검색결과 126건 처리시간 0.032초

강박스거더교의 설계 유효온도 산정을 위한 실험적 연구 (An Experimental Study for Estimation of Effective Temperature for Design in Steel Box Girder Bridge)

  • 이성행;신효경;김경남;정경섭
    • 한국강구조학회 논문집
    • /
    • 제28권6호
    • /
    • pp.449-458
    • /
    • 2016
  • 강박스거더교의 온도하중을 위한 유효온도를 산정하기 위하여, 강박스거더교의 시험체와 실교량에서 온도 데이터가 2년간 측정되었다. 이 실험체와 실교량의 온도 측정결과를 바탕으로 대기온도에 대한 최고 및 최저 유효온도를 2014년, 2015년, 그리고 연속 2년간 산정하였다. 산정된 최고, 최저 유효온도는 EURO code, 그리고 현행 도로교 설계기준과 서로 비교 평가되었다. 2년간(2 year) 측정한 데이터 기준으로 최대 유효온도와 Euro code의 결정계수는 교량 시험체에서 R=0.894, 실교량에서 R=0.927이 산정되며, 최저 유효온도는 교량 시험체에서 R=0.992, 실교량에서 R=0.813이 산정되었다. 또한 연구 결과는 도로교설계기준(한계상태설계법)의 최고온도와 유사하든가 약간 초과하는 것으로 평가되었다.

입구 물온도와 열부하가 냉각탑의 팬동력에 미치는 영향 분석 (Effects of Inlet Water Temperature and Heat Load on Fan Power of Counter-Flow Wet Cooling Tower)

  • ;이근식
    • 대한기계학회논문집B
    • /
    • 제37권3호
    • /
    • pp.267-273
    • /
    • 2013
  • 막충진재(film fill)를 갖는 냉각탑용 팬의 효율적인 운전조건을 제시하기 위하여, Merkel의 이론을 바탕으로 한 종전의 최적 총연간비용 모델을 사용하여 입구 물온도와 열부하에 따른 최소팬동력을 구하는 프로그램이 새로이 개발되었으며, 냉각탑의 설계 맵이 본 연구로부터 제시되었다. 전형적인 예들을 통하여 본 프로그램의 타당성이 입증되었다. 주어진 열부하에서 이들 팬동력(z 축)-공기질량플럭스(x 축, 최소팬동력 존재)-입구물온도(y 축, 최소팬동력의 최대값 존재)의 3차원 그래프는 말안장 형상으로 나타났다. 최소팬동력들은 열부하에 따라 증가하였다. 따라서, '고온수 유입과 저유량의 공기로 작동' 될 때가 항상 최소팬동력 조건이 아니며, '주어진 입구물온도에 대하여 최소팬동력에 대응하는 최적의 공기질량플럭스가 (열부하와 무관하게) 존재한다'는 사실이 본 연구결과로부터 밝혀졌다.

오산시의 맑은날 하절기 등가 하늘온도 예측 (Prediction of the Summer Effective Sky Temperatrure during the Clear Day on Osan City)

  • 변기홍
    • 한국태양에너지학회 논문집
    • /
    • 제30권5호
    • /
    • pp.100-106
    • /
    • 2010
  • The purpose of this study is to predict the effective sky temperature on Osan City during the summer. The north latitude, east longitude of Osan City is $37^{\circ}06'$ and $127^{\circ}02'$. The altitude from the sea level is 48m. Empirical relations of the effective sky temperature suggested by Duffie and Beckman are compared on clear days. For the effective sky temperature prediction, data measured by the Korea Meteorological Administration is used as an input to the Bliss model. Both Hottel and Krondratyev model are used to calculate the water vapor emissivity. The results using Hottel's model match well with the empirical relation proposed by Bliss. The results show maximum, minimum, and average values depending on water vapor emissivity model. The maximum deviation is about 10K and is due to total emissivity model.

한반도의 날씨 스트레스 지수 NET(Net Effective Temperature) 분포의 특성 (The Spatial and temporal distributions of NET(Net Effective Temperature) with a Function of Temperature, Humidity and Wind Speed in Korea)

  • 허인혜;최영은;권원태
    • 대한지리학회지
    • /
    • 제39권1호
    • /
    • pp.13-26
    • /
    • 2004
  • 본 연구는 상대적 날씨 스트레스 지수로 NET의 적용 가능성을 파악하고자 하였다. 기상청에서 예보하고 있는 기온, 습도, 바람 자료를 이용하여 NET 값의 시공간적 분포 특성을 분석하였다. 여름철 스트레스 지수인 일 최고 NET의 지역별 스트레스 기준값은 바람과 습도보다는 기온의 영향을 받으므로 일 최고 기온의 분포와 유사하다. 겨울철 스트레스 지수인 일 최저 NET의 스트레스 기준값은 산지 지역과 서울 이북 지역에서는 낮은 기온의 영향을. 해안 지역에서는 강한 바람의 영향으로 기준값이 여름철에 비하여 다양하게 나타난다. 스트레스가 강한 날의 발생 빈도는 여름철은 뚜렷한 연변화가 나타나지 않지만, 겨울철에는 1990년대 중반 이후 뚜렷한 증가 경향을 보인다.

국내 표준계사의 냉난방부하 특성 연구 (A Study on the Characteristics of Heating and Cooling Loads of Standard Chicken Houses in South Korea)

  • 권영철
    • 대한건축학회논문집:구조계
    • /
    • 제35권10호
    • /
    • pp.235-243
    • /
    • 2019
  • In South Korea, millions of poultry have died due to repeated heat waves every year. The purpose of this study is to analyze the characteristics of heating and cooling loads of chicken houses in Korea and to present an effective insulation and ventilation measures to minimize the damage of poultry due to summer heat wave and to save energy in chicken houses in winter. The heating and cooling loads of standard chicken house were calculated. As a result of the calculation of maximum heating load based on the minimum ventilation rate in winter, the outdoor air temperature requiring heating was $6{\sim}7^{\circ}C$ to keep the indoor air temperature of chicken houses as $24^{\circ}C$. The peak cooling load of chicken houses was mostly taken by the heat generated by chickens and the heat gain due to ventilation. The heat gain through building envelopes was as small as neglectable. Most of chicken houses is usually cooled by gigantic forced ventilation in summer in Korea. When the chicken houses are cooled by electric cooling machine such as cooler or air conditioner, it is more effective to keep minimum ventilation rate to reduce the maximum cooling load. To lower the temperature of supplying water to cooling pad, it is recommended to use the underground water below 10 meters from the ground if there is abundant underground water.

Antimicrobial Activities of White, Red, and Extruded Ginsengs with Different Extraction Conditions

  • Norajit, Krittika;Park, Mi-Ja;Ryu, Gi-Hyung
    • Food Science and Biotechnology
    • /
    • 제17권4호
    • /
    • pp.850-856
    • /
    • 2008
  • White, red, and extruded ginsengs were studied against 8 strains of food-borne pathogens and/or food spoilage microorganisms. The ginseng powders were extracted with different extractants and screened for antimicrobial activity using the disc diffusion and broth dilution techniques. The results showed that the yield of extraction was higher with increase of aqueous solution content and temperature. Preliminary screening revealed that the red ginseng extracts were most active, that has been found to be highly effective against all tested microbe except Listeria monocytogenes. Moreover, Bacillus subtilis has shown highly susceptible, which the diameters of inhibition zone values of 28 extracts were between 7 and 14 mm. The minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) recorded for the different crude ginseng extracts against microorganism using ranged from 6.25 to 100 mg/mL, indicated that the methanol extract of ginseng were more effective than ethanol and water extracts. The 60% methanol extract of red ginseng had the greatest effects against B. subtilis with MIC and MBC values at 6.25 mg/mL.

콘크리트 박스거더교의 설계 유효온도 산정을 위한 실험적 연구 (Experimental Study on the Effective Temperature Calculation of Concrete Box Girder Bridge)

  • 이성행
    • 한국산학기술학회논문지
    • /
    • 제21권11호
    • /
    • pp.740-745
    • /
    • 2020
  • 콘크리트 박스거더교의 합리적인 설계 온도하중을 산정하기 위하여, 1개의 교량시험체를 제작하였다. 교량시험체에 설치된 23개의 온도 게이지에서 1년간의 여름과 겨울기간에 30분 간격으로 하루에 48세트의 온도를 측정하였다. 상부 콘크리트와 측벽, 하부슬래브에 두께에 따른 온도변화를 검토하기 위하여 두께에 따라 여러 온도게이지를 부착하였다. 각 측점에서 측정된 온도를 통계 처리하여 추세선과 표준오차를 산정하고, 대표측점의 온도분포와 추세선을 제시하였다. 이를 바탕으로 Euro code에서 제시한 대기온도에서 여름철의 최고 유효온도와 겨울철의 최저 유효온도를 각각 산정하였다. 최고 유효온도는 35℃ 이상에서 Euro code와 비교하여 1.5~2℃ 높게 산정되었고, 최저 유효온도는 -13℃~-19℃에서 0.5~1.1℃로 더 낮게 분석되었다. 양산지방의 50년빈도 최고 및 최저 기온에 따른 본 연구의 유효온도와 비교해 보면, 최고 유효온도는 4.7℃ 높게, 최저 유효온도는 4.5℃ 더 낮게 산정되었다. 점점 높아지는 기후변동을 고려하고, 본 분석의 결과를 반영하면, 현 온도설계기준은 그 범위를 더 크게 하는 것이 필요한 것으로 판단된다.

Chemical Vapor Deposition Using Ethylene Gas toward Low Temperature Growth of Single-Walled Carbon Nanotubes

  • Jo, Sung-Il;Jeong, Goo-Hwan
    • Applied Science and Convergence Technology
    • /
    • 제24권6호
    • /
    • pp.262-267
    • /
    • 2015
  • We demonstrate the growth of single-walled carbon nanotubes (SWNTs) using ethylene-based chemical vapor deposition (CVD) and ferritin-induced catalytic particles toward growth temperature reduction. We first optimized the gas composition of $H_2$ and $C_2H_4$ at 500 and 30 sccm, respectively. On a planar $SiO_2$ substrate, high density SWNTs were grown at a minimum temperature of $760^{\circ}C$. In the case of growth using nanoporous templates, many suspended SWNTs were also observed from the samples grown at $760^{\circ}C$; low values of $I_D/I_G$ in the Raman spectra were also obtained. This means that the temperature of $760^{\circ}C$ is sufficient for SWNT growth in ethylene-based CVD and that ethylene is more effective that methane for low temperature growth. Our results provide a recipe for low temperature growth of SWNT; such growth is crucial for SWNT-based applications.

1904년 이래의 부산 기후 변동성 및 생활기상지수들의 기후변화 특성 연구 (A Study on Characteristics of Climate Variability and Changes in Weather Indexes in Busan Since 1904)

  • 전하은;하경자;김혜렴
    • 대기
    • /
    • 제33권1호
    • /
    • pp.1-20
    • /
    • 2023
  • Holding the longest observation data from April 1904, Busan is one of the essential points to understand the climate variability of the Korean Peninsula without missing data since implementing the modern weather observation of the South Korea. Busan is featured by coastal areas and affected by various climate factors and fluctuations. This study aims to investigate climate variability and changes in climatic variables, extremes, and several weather indexes. The statistically significant change points in daily mean rainfall intensity and temperature were found in 1964 and 1965. Based on the change point detection, 117 years were divided into two periods for daily mean rainfall intensity and temperature, respectively. In the long-term temperature analysis of Busan, the increasing trend of the daily maximum temperature during the period of 1965~2021 was larger than the daily mean temperature and the daily minimum temperature. Applying Ensemble Empirical Mode Decomposition, daily maximum temperature is largely affected by the decadal variability compared to the daily mean and minimum temperature. In addition, the trend of daily precipitation intensity from 1964~2021 shows a value of about 0.50 mm day-1, suggesting that the rainfall intensity has increased compared to the preceding period. The results in extremes analysis demonstrate that return values of both extreme temperatures and precipitation show higher values in the latter than in the former period, indicating that the intensity of the current extreme phenomenon increases. For Wet-Bulb Globe Temperature (effective humidity), increasing (decreasing) trend is significant in Busan with the second (third)-largest change among four stations.

내부에 히트파이프를 삽입한 메탈 하이드라이드 반응기의 열전달 특성에 대한 수치해석 연구 (A Numerical Study on the Heat Transfer Characteristics of a Metal Hydride Reactor with Embedded Heat Pipes)

  • 박영학;부준홍
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2008년도 추계학술대회B
    • /
    • pp.2346-2351
    • /
    • 2008
  • This study deals with heat pipes inserted into the metal hydride(MH) reactor to increase the effective thermal conductivity of the system and thus to enhance the thermal control characteristics. A numerical analysis was conducted to predict the effect of inserted heat pipes on the heat transfer characteristics of MH, which inherently has extremely low thermal conductivity. The numerical model was a cylindrical container of O.D. 76.3 mm and length 1 m, which is partially filled with about 60% of MH material. The heat pipe was made of copper-water combination, which is suitable for operation temperature range between $10^{\circ}C$ and $80^{\circ}C$. Both inner -and outer- heat pipes were considered in the model. Less than two hours of transient time is of concern when decreasing or increasing the temperature for absorption and discharge of hydrogen gas. FLUENT, a commercial software, was employed to predict the transient as well as steady-state temperature distribution of the MH reactor system. The numerical results were compared and analyzed from the view point of temperature uniformity and transient time up to the specified maximum or minimum temperatures.

  • PDF