• 대한전자공학회논문지
• /
• 제25권5호
• /
• pp.509-521
• /
• 1988

In the designs of integrated circuits, the buffer circuits used for driving a large capacitive load from minimum-structured logic circuit outputs have important effects upon system throughputs. Therefore it is important to optimize the buffer circuits. In this paper, the principle of designing CMOS buffer circuits which have the minimum delay and drive the given capacitive load is discussed. That is, the effects of load capacitance upon rise time, fall time, and delay of the CMOS inverter and the effects of parasitic capacitances are finely analysed to calculate the requested minimum-delay CMOS buffer condition. This is different from the method by C.A. Mead et. al.[2.3.4.]which deals with passive-load-nMOS buffers. Large channel width MOS transistor stages are necessary to drive a large capacitive load. The effects of polysilicon gate resistances of such large stages upon delay are also analysed.And, the area of buffer circuits designed by the proposed method is smaller than that of buffer circuits designed by C.A. Mead's method.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제53권11호
• /
• pp.786-792
• /
• 2004

A wavelet based ECG data compression has become an attractive and efficient method in many mobile tele-cardiology applications. But large data size required for high compression performance leads a serious delay. In this paper, new wavelet compression method with minimum delay is proposed. It is based on deciding the type and compression ratio(CR) of block organically according to the standard deviation of input ECG data with minimum block size. Compression performances of the proposed algorithm for different MIT ECG Records were analyzed comparing other ECG compression algorithm. In addition to the processing delay measurement, compression efficiency and reconstruction sensitivity to error were also evaluated via random noise simulation models. The results show that the proposed algorithm has both lower PRD than other algorithm on same CR and minimum time in the data acquisition, processing and transmission.

• 전기학회논문지
• /
• 제58권1호
• /
• pp.187-192
• /
• 2009

This paper presents a method for designing a robust controller that alleviates disturbance effects and compensates performance degradation owing to the time-delay. Disturbance observer(DOB) approach as a tool of robust control has been widely employed in industry. However, since the Pade approximation of time-delay makes the plant non-minimum phase, the classical DOB cannot be applied directly to the system with time-delay. By using a new DOB structure for non-minimum phase systems together with the Smith Predictor, we propose a new controller for reducing the both effects of disturbance and time-delay. Moreover, the closed-loop system can be made robust against uncertain time-delay with the help of a Pill controller tuning method that is based on a second-order plus dead time modeling technique.

• 정보처리학회논문지C
• /
• 제10C권3호
• /
• pp.367-376
• /
• 2003

본 연구는 로컬 네트워크의 토폴로지를 설계하거나 루트 노드로부터 여러 개의 통신 경로를 구하는 데 사용될 수 있는 DCMST(Delay constrained Capacitated Minimum Spanning Tree) 문제를 다룬다. 기존의 CMST 문제는 루트 노드의 한 포트가 담당하는 트래픽의 용량에만 제한이 있는 데 비해 DCMST 문제에는 네트워크 평균 지연 시간의 제약 조건이 추가된다. 이 문제는 종단 노드의 트래픽 요구량과 네트워크의 평균 지연 시간을 만족시키는 스패닝 트리의 집합을 구하는 것으로 목적 함수는 전체 링크 비용을 최소로 하는 것이다. 본 연구에서는 트레이드-오프에 기준한 노드 교환 알고리즘과 노드 이동 알고리즘 그리고 평균 지연 알고리즘으로 구성되는 2 단계 휴리스틱을 제시한다. 실제 계산 경험과 성능 분석을 통해 제안한 알고리즘이 평균 지연을 고려한 기존의 CMST 알고리즘보다 비용 측면에 있어 더 우수한 해를 생성할 수 있음을 보였다.

• ETRI Journal
• /
• 제35권3호
• /
• pp.406-413
• /
• 2013

In this paper, an orthogonal frequency division multiple access (OFDMA)-based minimum end-to-end delay (MED) distributed routing scheme for mobile backhaul wireless mesh networks is proposed. The proposed scheme selects routing paths based on OFDMA subcarrier synchronization control, subcarrier availability, and delay. In the proposed scheme, OFDMA is used to transmit frames between mesh routers using type-I hybrid automatic repeat request over multipath Rayleigh fading channels. Compared with other distributed routing algorithms, such as most forward within radius R, farthest neighbor routing, nearest neighbor routing, and nearest with forwarding progress, simulation results show that the proposed MED routing can reduce end-to-end delay and support highly reliable routing using only local information of neighbor nodes.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(II)
• /
• pp.1512-1515
• /
• 1987

The buffer circuit having minimum delay time is designed and analyzed in this paper. Considering the parasitic components of the MOS transistor, the optimal transistor size ratio between the individual buffer stages is presented. This paper's result is better than that of the Mead and Conway's analysis [1] with respect to both delay time and total area that buffer occupies.

• 한국통신학회논문지
• /
• 제38A권12호
• /
• pp.1013-1020
• /
• 2013

본 논문에서는 대역 확산 신호를 위한 고유치 해석 기반의 초 분해능 지연 시간 추정(super-resolution time delay estimation) 알고리즘을 개발하고 각 알고리즘의 성능을 비교, 분석한다. 먼저, 고유치 해석 기반의 대표적인 도래각 추정 알고리즘인 MUSIC, ESPRIT, Minimum-Norm을 이용하여 초 분해능 지연 시간 추정 알고리즘을 개발하고 직접 대역확산 방식의 ISO/IEC 24730-2.1 실시간 위치 추적 시스템 (real-time locating system: RTLS)에 적용하여 RTLS 환경에서 각 알고리즘의 성능을 시뮬레이션을 통해 비교, 분석한다. 시뮬레이션 결과로부터 세 알고리즘 모두 레일리이 분해능 한계 이내로 수신되는 다중 신호의 지연 시간을 모두 분리, 추정함을 알 수 있었다. 그러나, RTLS 환경에서는 MUSIC과 Minimum-Norm의 성능은 서로 비슷하나 ESPRIT은 두 알고리즘에 비해 성능이 현격히 저하됨을 알 수 있다.

• Management Science and Financial Engineering
• /
• 제10권1호
• /
• pp.53-75
• /
• 2004

Most existing studies on time-dependent networks have been focused on finding a minimum delay path given a departure time at the origin. There, however, frequently happens a situation where users can select any departure time in a certain time interval and want to spend as little time as possible on traveling the networks. In that case. the delay spent on traveling networks depends on not only paths but also the actual departure time at the origin. In this paper, we propose a new problem in time-dependent networks whose objective is to find an optimal departure time given possible departure time interval at the origin. From the optimal departure time, we can obtain a path with minimum delay among all paths for possible departure times at the origin. In addition, we present an algorithm for finding an optimal departure time by enumerating trees which remain shortest path tree for a certain time interval.

• 한국통신학회논문지
• /
• 제22권12호
• /
• pp.2626-2634
• /
• 1997

The purpose of multicasting is to reduce the network costs for transmitting the same traffic to multiple destinations. In this paper, an efficient delay-bounded multicasting routing algorithm is proposed, which satistifies the network conditions of cost minimization and can adjust the dynamic events, such as 'leave and/or join ones' from the multicast group. Also, our algorithm is designed for various network requirements such as the efficiet dynamic group support, high-quality data distribution, and adaptability to variable situation. After the delay tolerance and the maximum group size are determined according to network state and requirements for delay and cost, the dynamic delay-bounded multicast tree is constructed using partial multicast routing. We evaluate the performance of the proposed algorithm by running simulations on randomly generated test networks using a Sun Sparc 20 workstation. We were able to obtain good simulation resutls, which means solutions that lies between the minimum cost solution and the minimum delay one.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.441-444
• /
• 2003

Network uncertainties such as data loss and time delay can vary the stability property of networked control system. Therefore, these uncertainties must be considered first in designing networked control system. In this paper, we present a new stability analysis method of networked control system with data loss and time delay. The proposed method can determine maximum allowable time delay and minimum allowable transmission rate that preserves stability performance of networked control system. The results of the simulation validate effectiveness of our stability analysis method.