• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.3
• /
• pp.138-143
• /
• 2002

In this study, ZnS: Cu nano-crystals are synthesized by solution synthesis technique (SST). The structural properties such as crystal structure and particle morphology, and the optical properties such as light absorption/transmittance, energy bandgap, and photoluminescence (PL) excitation/emission are investigated. In an attempt to realize the Cu-doping easiness, the synthesis temperature (~$80^{\circ}C$) is applied to the synthesis bath, and the thiourea is used as sulfur precursor, unlike other general chemical synthesis route. Both undoped ZnS and ZnS : Cu nano-crystals have the cubic crystal structure and have the spherical particle shape. The position of light absorption edge is ~305 nm, indicating the occurrence of quantum size effect. The PL emission intensity and line-width are maximum and minimum, respectively, for Cu-doping concentration 0.03M. In particular, the dependence of PL intensity and line-width on the Cu-doping concentration for ZnS : Cu nano-crystals synthesized by SST is reported for the first time in this study. Experimental results of the absorption edge and the PL excitation show that the main emission peak of ZnS : Cu nano-crystals (~510 nm) in this study is due to the radiative recombination center in the energy bandgap induced by Cu dopant.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.38 no.2
• /
• pp.31-37
• /
• 2001

Digital servo implementation in optical servo chip has been spotlighted since it is easy to integrate with other blocks and it has less sensitive characteristics change in terms of temperature variation and better flexibility to the system variation like pick-up. Therefore, Optical disc players adopted digital servo are increasing in market. However, one drawback of digital signal processor embedded digital servo is power consumption that is one of the most important factors of portable optical disc player system. For that reason, this paper introduces new architecture to reduce power consumption of digital servo by means of reducing DSP load but increasing minimum hardware size. The main idea of reducing power consumption of digital servo greatly is utilizing CDP characteristics as most operations are done and used up most operating steps of DSP at the initial time, but most power consumption is occurred in play mode. Therefore, if operating steps for digital filtering in play mode could be reduced greatly, power consumption of overall system can be reduced greatly. This paper shows an example that low power digital servo architecture whose current is reduced almost 83%, compare to that of digital servo which is not applied by the low power architecture introduced in this paper.

• Journal of Korean Society of Forest Science
• /
• v.101 no.3
• /
• pp.509-516
• /
• 2012

In this research, it was intended to examine the vulnerability of Pinus rigida to climate changes, a major planting species in Korea. For this purpose, the distribution of Pinus rigida and its changes caused by climate changes were estimated based on the 'A1B' climate change scenario suggested by IPCC. Current distribution of Pinus rigida was analyzed by using the $4^{th}$Forest Type Map and its potential distribution in the recent year (2000), the near future (2050) and the further future (2100) were estimated by analyzing the optimized ranges of three climate indices - warmth index(WI), minimum temperature index of the coldest month (MTCI) and precipitation effectiveness index(PEI). The results showed that the estimated potential distribution of Pinus rigida declines to 56% in the near future(2050) and 15% in the further future (2100). This significant decline was found in most provinces in Korea. However, in Kangwon province where the average elevation is higher than other provinces, the area of potential distribution of Pinus rigida increases in the near future and the further future. Also the result indicated that the potential distribution of Pinus rigida migrates to higher elevation. The potential distributions estimated in this research have relatively high accuracy with consideration of classification accuracy (44.75%) and prediction probability (62.56%).

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.6
• /
• pp.806-811
• /
• 2002

A 90 d study was designed to investigate the effects of rumen undegradable protein (RUP) and a mixture of Cu, Zn and Mn proteinate (CZMP) on milk yield and composition and ovarian functions during rainy months. Twenty four Holstein${\times}$ indigenous cows in their 2nd and 3rd lactation were randomly allocated to total mixed rations (TMR) containing soy bean meal (SBM) as a source of rumen degradable protein (RDP), SBM plus CZMP, and formalin treated SBM (FSBM) as a source of RUP. Maximum and minimum temperature humidity index during the experimental period were 83.6-84.7 and 75.4-76.1. There were no differences (p>0.05) in intakes of dry matter, crude protein and net energy and in contents of butterfat, lactose and minerals. Cows on TMR containing FSBM not only lost less weight (-278, -467 and -433 g/d) with more intake of RUP (0.92, 0.58 and 0.59 kg/d) but also produced more milk (19.27, 18.23 and 18.13 kg/d) and 4% fat corrected milk (18.57, 17.57 and 17.51 kg/d) with more protein (3.06, 2.81 and 2.80%), solids-not-fat (8.69, 8.38 and 8.38%) and less milk urea N (9.3, 15.4 and 15.0 mg/dl) compared with those on TMR containing SBM and SBM+CZMP, respectively (p<0.01). However, cows on TMR containing SBM and SBM+CZMP did not differ in these respects (p>0.05). Whereas incidence of cystic ovaries at 20 and 90 d pospartum was less (p<0.01) in cows on TMR containing SBM+CZMP (37.3 and 12.5%) than those on TMR containing SBM (62.5 and 25%), it was nil for cows on TMR containing FSBM. Cows in all three group differed (p<0.01) from each other for the recurrence of first observed estrus with those on TMR containing FSBM having least days (22, 36 and 47 d) compared with their counterpart on TMR containing SBM+CZMP and SBM, repectively. The results suggest that RUP is one of the limiting factors affecting milk yield and its composition and ovarian functions during early lactation of dairy cows in the tropics.

• Korean Journal of Microbiology
• /
• v.43 no.2
• /
• pp.91-99
• /
• 2007

For the detection of Human Immunodeficiency Virus (HIV), multiple and ultra-rapid real-time PCR methods were developed. The target DNA sequences were deduced from HIV-1 specific 495bp partial env gene (gi_1184090) and from HIV-2 specific 294 bp partial env gene (gi_1332355), and were synthesized by using PCR-based gene synthesis on the reason of safety. Ultra-rapid real-time PCR was performed by $Genspector^{TM}$ using microchip-based, $1\;{\mu}l$ of reaction volume with extremely short time in each 3 step in PCR. The detection including DNA-amplification and melting temperature analysis was completed inner 15 minutes. The HIV-1 specific 117 bp-long and HIV-2 specific 119 bp-long PCR products were successfully amplified from minimum of template,2.3 molecules of each env gene. This kind of real-time PCR was designated as ultra-rapid real-time PCR in this study and it could be applied not only an alternative detection method against HIV, but also other pathogens using PCR-based detection.

• Journal of Animal Science and Technology
• /
• v.59 no.8
• /
• pp.17.1-17.13
• /
• 2017

Background: Omega-3 long-chain (${\geq}C_{20}$) polyunsaturated fatty acids (${\omega}3$ LC-PUFA) confer important attributes to health-conscious meat consumers due to the significant role they play in brain development, prevention of coronary heart disease, obesity and hypertension. In this study, the ${\omega}3$ LC-PUFA content of raw and cooked Longissimus thoracis et lumborum (LTL) muscle from genetically divergent Australian prime lambs supplemented with dietary degummed crude canola oil (DCCO) was evaluated. Methods: Samples of LTL muscle were sourced from 24 first cross ewe and wether lambs sired by Dorset, White Suffolk and Merino rams joined to Merino dams that were assigned to supplemental regimes of degummed crude canola oil (DCCO): a control diet at 0 mL/kg DM of DCCO (DCCOC); 25 mL/kg DM of DCCO (DCCOM) and 50 mL/kg DCCO (DCCOH). Lambs were individually housed and offered 1 kg/day/head for 42 days before being slaughtered. Samples for cooked analysis were prepared to a core temperature of $70^{\circ}C$ using conductive dry-heat. Results: Within raw meats: DCCOH supplemented lambs had significantly (P < 0.05) higher concentrations of eicosapentaenoic (EPA, $20:5{\omega}3$) and EPA + docosahexaenoic (DHA, $22:6{\omega}3$) acids than those supplemented with DCCOM or DCCOC; Dorset sired lambs contained significantly (P < 0.05) more EPA and EPA + DHA than other sire breeds; diet and sire breed interactions were significant (P < 0.05) in affecting EPA and EPA + DHA concentrations. In cooked meat, ${\omega}3$ LC-PUFA concentrations in DCCOM (32 mg/100 g), DCCOH (38 mg/100 g), Dorset (36 mg/100 g), White Suffolk (32 mg/100 g), ewes (32 mg/100 g) and wethers (33 mg/100 g), all exceeded the minimum content of 30 mg/100 g of edible cooked portion of EPA + DHA for Australian defined 'source' level ${\omega}3$ LC-PUFA classification. Conclusion: These results present that combinations of dietary degummed crude canola oil, sheep genetics and culinary preparation method can be used as effective management tools to deliver nutritionally improved ${\omega}3$ LC-PUFA lamb to meat consumers.

• International Journal of Highway Engineering
• /
• v.20 no.1
• /
• pp.47-58
• /
• 2018

PURPOSES : The purpose of this study is to evaluate the mechanical properties of a cold-recycling asphalt mixture used as a base layer and to determine the optimum emulsified-asphalt content for ensuring the mixture's performance. METHODS : The physical properties (storage stability, mixability, and workability) of three types of asphalt emulsion (CMS-1h, CSS-1h, and CSS-1hp) were evaluated using the rotational viscosity test. Asphalt emulsion residues, prepared according to the ASTM D 7497-09 standard, were evaluated for their rheological properties, including the $G*/sin{\delta}$and the dynamic shear modulus (${\mid}G*{\mid}$). In addition, the Marshall stability, indirect tensile strength, and tensile-strength ratio (TSR) were evaluated for the cold-recycling asphalt mixtures fabricated according to the type and contents of the emulsified asphalt. RESULTS : The CSS-1hp was found to be superior to the other two types in terms of storage stability, mixability, and workability, and its $G*/sin{\delta}$ value at high temperatures was higher than that of the other two types. From the dynamic shear modulus test, the CSS-1hp was also found to be superior to the other two types, with respect to low-temperature cracking and rutting resistance. The mixture test indicated that the indirect tensile strength and TSR increased with the increasing emulsified-asphalt content. However, the mixtures with one-percent emulsified-asphalt content did not meet the national specification in terms of the aggregate coverage (over 50%) and the indirect tensile strength (more than 0.4 MPa). CONCLUSIONS : The emulsified-asphalt performance varied greatly, depending on the type of base material and modifying additives; therefore, it is considered that this will have a great effect on the performance of the cold-recycling asphalt pavement. As the emulsified-asphalt content increased, the strength change was significant. Therefore, it is desirable to apply the strength properties as a factor for determining the optimum emulsified-asphalt content in the mix design. The 1% emulsified-asphalt content did not satisfy the strength and aggregate coverage criteria suggested by national standards. Therefore, the minimum emulsified-asphalt content should be specified to secure the performance.

• The Journal of Engineering Geology
• /
• v.20 no.1
• /
• pp.79-87
• /
• 2010

Field water qualities (temperature, pH, Eh, EC, DO) was monitored by 6 times March to September 2009 on background water (BW) and acid mine drainage (AMD0, AMD1, AMD2 and AMD3 points), and flow rate was measured on AMD0 point. Acid mine drainage flowed out from abandoned Ilgwang mine were high acid waters that lower than pH 3, and Eh component was ranged 400 to 600 mV. EC measured on acid mine drainage were higher over 10 times than background water, DO component was increased by reaction on the air during the water flow from AMD0 point to AMD4 point. Heavy metal concentrations in acid mine drainage were ordered Fe > Cu > Zn > Mn > As > Cd, and Fe concentration was highest for 81.870~474.30 mg/L. Monitoring periods measured maximum concentrations of heavy metals were May for As and Cd, June for Fe, July for Cu, Zn and Mn. The periods measured minimum concentrations were monitored April for Cd and Mn, September for Fe, Cu, Zn and As. Discharge mass of heavy metal components were calculated 53.44 kg for Fe, 6.25 kg for Cu, 5.26 kg for Zn, 2.13 kg for Mn, 0.14 kg for As and 0.04 kg for Cd, respectively. Total discharge mass of heavy metal components were calculated 67.26 kg for 1 day, and Fe component was taken 79% of total mass.

• Journal of Korea Water Resources Association
• /
• v.40 no.3
• /
• pp.191-204
• /
• 2007

To evaluate the climate change impacts on water resources, this study generates and analyzes the climate change scenarios for 139 sub-basins in Korea using high resolution ($27km\;{\times}\; 27km$) SHES A2 scenario and LARS-WG. The $27km\;{\times}\; 27km$ high resolution NCAR/PSU MM5 scenario is downscaled from 350km horizontal resolution ECHO-G data. The A2 scenario relatively well reproduced Korean spatial precipitation characteristics, but it underestimated the precipitation over the Han River and the Gum River basins. The LARS-WG was selected and evaluated to overcome the limitation of climate model and to create a highly reliable climate scenario. The results show that the monthly mean minimum and maximum temperature and monthly mean precipitation are within ${\pm}20%$ from the observed mean, and ${\pm}50%$ from the standard deviation that represents the generated data are highly reliable. Moreover, the comparison results between observed data and generated data from LARS-WG show that the latter can reflect the regional climate characteristic very well that can not be simulated from the former.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.21 no.4
• /
• pp.229-237
• /
• 2019

This study was conducted to estimate annual reference evapotranspiration (ET₀) for the agro-climatic zones for rice paddy fields in South Korea between 1980 and 2015. The daily ET₀ was estimated by applying the Penman-Monteith method to meteorological data from 61 weather stations provided by Korean Meteorological Administration (KMA). The average of annual ET₀ from 1980 to 2015 was 1334.1±33.89 mm. The ET₀ was the highest at the Southern Coastal Zone due to their higher air temperature and lower relative humidity. The ET₀ had significantly increased with 2.81 mm/yr for the whole zones over 36 years. However, the change rate of it was different among agro-climatic zones. The annual ET₀ highly increased in central zones and eastern coastal zones. In terms of correlation coefficient, the temporal change of the annual ET₀ was closely related to variations of four meteorological factors (i.e., mean, minimum temperatures, sunshine duration, and relative humidity). The results demonstrated that whole Korean agro-climatic zones have been undergoing a significant change in the annual ET₀ for the last 36 years. Understanding the spatial pattern and the long-term variation of the annual ET₀ associated with global warming would be useful to improve crop and water resource managements at each agro-climatic zone of South Korea.