• 제목/요약/키워드: Minimum Impulse Bit

검색결과 3건 처리시간 0.016초

광학 센서를 이용한 마이크로 추력기 성능측정 시스템 개발 (Micro-Thruster Performance Measurement System Development Using Optical Sensors)

  • 강석진;조혜란;최영훈;장영근
    • 한국항공우주학회지
    • /
    • 제36권8호
    • /
    • pp.780-789
    • /
    • 2008
  • 본 논문에서는 새로운 추력기 성능 측정 방식을 제안한다. 광센서를 이용하여 추력기를 탑재한 것을 가정한 진자가 일정구간을 지나가는 시간을 측정하여 마이크로 추력기의 성능을 계산할 수 있도록 하였다. 마이크로 추력기의 추력을 측정하기 위해서 이미 몇 종류의 측정 장비가 개발되어있지만 본 논문에서는 최소 임펄스 비트(minimum impulse bit)를 직접적으로 측정할 수 있으면서 요구되는 보정과정을 최소화 할 수 있는 새로운 시스템에 대해 논술하였다. 이전에 사용되지 않은 시간 측정 방식을 응용하여 추력기에서 생성되는 임펄스를 계산할 수 있다. 이러한 측정 시스템의 바탕이 되는 이론에 대해 설명하였고 개발된 하드웨어를 통해 실제로 시험하였다. 검증을 위해서 추력이 부정확한 추력기가 아닌 위치변화를 주는 스페이서를 사용하여 하드웨어와 시뮬레이션 결과를 비교분석하였다. 개발된 하드웨어를 통해 개념인증 및 시스템 검증을 수행하였다.

Bit Decision 윈도우를 이용한 Noncoherent IR-UWB 수신기의 심벌 동기에 관한 연구 (Symbol Synchronization Technique using Bit Decision Window for Non-Coherent IR-UWB Systems)

  • 이순우;박영진;김관호
    • 대한전자공학회논문지TC
    • /
    • 제44권2호
    • /
    • pp.15-21
    • /
    • 2007
  • 본 논문에서는 Impulse-radio-based Ultra Wideband (IR-UWB)를 이용한 에너지 검출 기반의 비동기 수신기에서 저사양의 ADC와 간단한 디지털 회로 만으로 이루어진 심벌 동기 획득(acquisition) 및 심벌 동기 추적(tracking) 방식을 제안한다. 기존의 심벌 동기 방식이 정확한 심벌 동기 '시점을 찾는 것에 초점을 맞추었다면, 제안하는 방식은 심벌 동기 '구간'을 찾아 그 구간 내에서 데이터를 판단함으로써 하드웨어 복잡성을 낮추었고, 전력 소모를 줄였다. 이를 위해 심벌 동기 구간에 해당하는 BDW (Bit Decision Window)를 정의하고 SNR(Signal to Noise Ratio), 하드웨어 자원 및 BDW의 크기와 BER (Bit Error Rate)와의 관계를 분석하였다. 주어진 SNR과 하드웨어 자원으로 BER을 최소화하기 위한 BDW의 크기를 구한다. 제안한 알고리즘은 실제 임펄스 채널 특성을 고려하여 모의실험을 통하여 검증하였다.

디지털 셀룰라 시스템을 위한 개선된 GMSK 직교 변조기의 설계 (A design of an improved GMSK quadrature modulator for digital cellular system)

  • 송영준;한영열
    • 전자공학회논문지A
    • /
    • 제33A권6호
    • /
    • pp.32-41
    • /
    • 1996
  • We propose the improved GMSK (gaussian-filtered minimum shift keying) quadrature modulator using the FIR(finite impulse response )filter whose coefficients are obtained form the differnce of phase response, and design its ASIC (applicaton specific integrated circuit) which can be used for GSM (global system for mobile communication) digital cellular system and DCS 1800 (digital cellular system at 1800MHz) personal communication system. Input data become quantized I and Q channel 10 bit signal through cosine and sine ROM mapping after being filtered by the FIR filter whose normalized bandwidth is 0.3 and designed by considering intersymbol interference as well as sampling ratio. These two signals become the GMSK modulated I and Q channel signal through DAC (digital-to-analog converter) and 7th order analog chebyshev LPF(low pass filter) respectively. The difference between the ideal analog signal and its digitized signal is analyzed in terms of sampling noise, quantization noise, truncation noise and coefficient noise. And the effect of the LPF following the DAC is considered. The ASIC design of the GMSK quadrature modulator is also confirmed by an experiment.

  • PDF