• Bulletin of the Korean Chemical Society
• /
• v.29 no.6
• /
• pp.1162-1166
• /
• 2008

In this paper, several parameters affecting the sensitivity and determining the minimum detectable activity (MDA) for the measurement of the Pu isotopes were investigated. Among the parameters affecting the determination of the MDA values for the Pu isotopes in the environmental samples, amounts of the samples appeared to be crucial factors in decreasing the MDA values. The MDA for the Pu isotopes in the environmental samples were calculated by varying the counting time of the samples and background. The results obtained in this study can be used for an environmental radiation monitoring program regarding the level of concern for a radionuclide beyond which some action may need to be taken.

• Journal of KSNVE
• /
• v.7 no.6
• /
• pp.919-929
• /
• 1997

Induction motors are used in many areas to transform electrical energy to mechanical energy. In the design of an induction motor, not only energy efficiency but also noise becomes an important factor. To effectively address the noise problem, it will be convenient if one can see where and how noise is generated and propagated. In this study sound radiation by an induction motor is visualized using cylindrical acoustic holography. To minimize the bias error by window effect Minimum Error Window(MEW) is used. Its performance is verified by numerical simulations. Based on these theoretical understanding, sound pressure measurement with an induction motor are performed. Not only sound radiation are visualized but sound pressure level and sound power level are also estimated. Results show that the main source is located at nearly bottom part of the motor and the total sound pressure level is 49dB, which satisfies the guideline value suggested by the KS C 4202.

• Journal of the Korean Society of Safety
• /
• v.17 no.2
• /
• pp.1-7
• /
• 2002

In this paper, the maximum minimum strain energy density criterion was applied to the mixed mode fatigue test of A5052 H34 alloy. In this study result we can have seen that the authors stress intensity factor for the finite width specimen and method of determining testing load, based on the plastic zone size and the limited maximum stress intensity factor by ASTM STANDARD E-647-95, is useful.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.9
• /
• pp.1421-1426
• /
• 2005

The stationary point structures and relative energies between them as well as binding energies of $(CO)_2$ have been investigated at the CCSD(T) level using the correlation-consistent basis sets aug-cc-pVXZ(X=T,Q,5). It is found that while the equilibrium structure corresponds to the C-bonded T-shaped configuration with intermolecular distance of 4.4 $\AA$, there exists another minimum, slightly higher in energy ($\sim$10 $cm^{-1}$) than the global minimum, corresponding to the O-bonded T-shaped configuration with the intermolecular distance of 3.9 $\AA$. The CCSD(T) basis set limit binding energy of $(CO)_2$ is estimated to be 132 $cm^{-1}$.

• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.96-99
• /
• 2008

The MRE (Monitoring Reconfiguration Electronics) board included inside the SCU (Spacecraft Computer Unit) in the COMS (Communication, Ocean and Meteorological Satellite) spacecraft is used to monitor the battery voltage and to detect a battery under voltage (low battery capacity) or a battery overvoltage (overcharge). In case of alarm detection, a reconfiguration is initiated by the MRE board. The MRE configures the overall spacecraft in the survival mode to protect the Li-Ion (lithium ion) battery from overcharge and over discharge. For the EPS (Electrical Power Subsystem) point of view, the survival mode can be trigged from hardware wired thresholds. The aim of this paper to provide and to justify the low and high threshold levels which are associated to the MRE battery voltage monitoring. The MRE trig guarantees minimum battery energy to available for the required 48 hours autonomy duration of the spacecraft after MRE trig in the survival mode.

• IEIE Transactions on Smart Processing and Computing
• /
• v.3 no.2
• /
• pp.83-87
• /
• 2014

This paper introduces a refined opportunistic interference alignment (OIA) technique that uses minimum mean square error (MMSE) detection at the receivers in multiple-input multiple-output multi-cell uplink networks. In the OIA scheme under consideration, each user performs the optimal transmit beamforming and power control to minimize the level of interference generated to the other-cell base stations, as in the conventional energy-efficient OIA. The result showed that owing to the enhanced receiver structure, the OIA scheme shows much higher sum-rates than those of the conventional OIA with zero-forcing detection for all signal-to-noise ratio regions.

• Structural Engineering and Mechanics
• /
• v.76 no.1
• /
• pp.27-56
• /
• 2020

In this paper, the deflection and buckling analyses of porous nano-composite piezoelectric plate reinforced by carbon nanotube (CNT) are studied. The equations of equilibrium using energy method are derived from principle of minimum total potential energy. In the research, the non-local strain gradient theory is employed to consider size dependent effect for porous nanocomposite piezoelectric plate. The effects of material length scale parameter, Eringen's nonlocal parameter, porosity coefficient and aspect ratio on the deflection and critical buckling load are investigated. The results indicate that the effect of porosity coefficient on the increase of the deflection and critical buckling load is greatly higher than the other parameters effect, and size effect including nonlocal parameter and the material length scale parameter have a lower effect on the deflection increase with respect to the porosity coefficient, respectively and vice versa for critical buckling load. Porous nanocomposites are used in various engineering fields such as aerospace, medical industries and water refinery.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.11 no.3
• /
• pp.102-109
• /
• 2002

The fatigue crack growth under mixed mode condition has been discussed within the scope of linear fracture mechanics such as maximum tangential stress, maximum tangential principal stress and minimum strain energy density. The purpose of this study is to investigate the characteristics of fatigue test crack growth in 304 stainless steel under mixed node. The fatigue test results carried out by using inclined pre-crack specimens was compared to both of the theoretical predictions of the criteria, maximum tangential stress and stain energy density. As difference from theoretical analysis, the transition region from mixed mode to mode I appeared in the fatigue test. There is deep relationship between the angle of slanted pre-crack and transition. Therefore, as applying the different stress intensity factor to each node I+II and mode I, the directions and rates of fatigue crack growth are evaluated more accurately under mixed mode.

• Journal of Information Processing Systems
• /
• v.10 no.3
• /
• pp.412-428
• /
• 2014

Request oriented sensor networks have stricter requirements than conventional event-driven or periodic report models. Therefore, in this paper we propose a minimum energy data aggregation (MEDA), which meets the requirements for request oriented sensor networks by exploiting a low power real-time scheduler, on-demand time synchronization, variable response frame structure, and adaptive retransmission. In addition we introduce a test bed consisting of a number of MEDA prototypes, which support near real-time bidirectional sensor networks. The experimental results also demonstrate that the MEDA guarantees deterministic aggregation time, enables minimum energy operation, and provides a reliable data aggregation service.

• 한국정보통신설비학회:학술대회논문집
• /
• 2005.08a
• /
• pp.349-357
• /
• 2005

In this paper, a new clustering algorithm using the Guaranteed Minimum Coverage (GMC) is proposed. In the new protocol, an appropriate distribution of clusterheads is accomplished by guaranteeing a stochastic coverage at each clusterhead(CH)s. Using this protocol, the communication cost from clusterheads to their member nodes and the load variance in each clusterheads are reduced. Therefore, the network lifetime can be extended and the fair energy consumption for all CHs can be achieved