• Title/Summary/Keyword: Minimal change

Search Result 485, Processing Time 0.024 seconds

An Experimental Study on the Effect of Irradiation and cia- dichlorodiBmmineplatinum(II) on the myocardium of Rats (방사선조사와 cis-dichlorodismmineplstinum(II)가 휜쥐의 심근에 미치는 효과에 관한 실험적 연구)

  • Lee Kyung-Ja
    • Radiation Oncology Journal
    • /
    • v.12 no.3
    • /
    • pp.285-293
    • /
    • 1994
  • Purpose : The study was designed to investigate the effect of cis-dichlorodiammineplatinum(II)(cis-DDP) on the radiation-induced cardiomyopathy in the rat. Materials and Methods : The myocardial damage was assessed by histopathologic changes. In radiation alone group, radiation dose ranged from 10-40 Gy X-ray in a single dose and in combined group, cis-dichlorodiammineplatinum(II) at a dose of 6 mg/kg was given intraperitoneally immediately after irradiation of same dose with X-ray alone group. Results : The early changes by radiation included congestion, inflammatory cell infiltrations and fibrosis in myocardial interstitium with focal myocardial necrosis, which was noted in 10 Gy group, Myocardial fibrosis was increased by increasing dose of radiation but myocardial necrosis was not Proportional to radiation dose. cis-DDP alone group showed minimal degeneration of myocardium with surrounded by inflammatory cell infiltrations. In combined group, myocardial fibrosis in 10 Gy group were similar to radiation alone group, but 30 Gy and 40 Gy groups showed severer changes. Electron microscopic examination showed disruption of Z-band and edema of mitochondria with decreased matrix density in 20 Gy radiation group which were severer in 40 Gy radiation group. Combined group showed endothelial changes and disruption of Z-band worse than radiation alone group as well as increased connective tissue, which was considered as a hallmark of late change in radiation-induced heart disease. Conclusion : This results showed minimal enhancement of the radiation-induced cardiomyopathy in rats by cis-DDP.

  • PDF

Effects of Cover Crops on Soil Chemical Properties and Biota in a Pear Orchard

  • Eo, Jinu;Park, Jin-Myeon;Park, Kee-Choon
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.48 no.1
    • /
    • pp.15-21
    • /
    • 2015
  • The use of cover crops has a beneficial effect on sustainable soil management in pear orchards. We aimed to compare changes in soil chemical properties and biota with the use of different cover crops. We tested the effects of five cover plants, including hairy vetch, orchard grass, rattail fescue, rye, and perennial ryegrass. Use of different cover crops had a minimal impact on soil chemical properties through three year experiments. The aboveground biomass was greatest with the use of rye. The potential amounts of returnable N and P were highest when leguminous hairy vetch was used as a cover plant. Changes in the composition of the microbial community were investigated by phospholipid fatty acid (PLFA) analysis. Microbial PLFAs were highest with the use of rattail fescue and lowest with the use of hairy vetch. Minimal changes in the abundances of nematodes and microarthropods suggested that there was no bottom-up control in the soil ecosystem. The results also show that increases in aboveground biomass and nutrient content with the use of cover crops may not promote the abundance of soil organisms.

Gesture Recognition Algorithm by Analyzing Direction Change of Trajectory (궤적의 방향 변화 분석에 의한 제스처 인식 알고리듬)

  • Park Jahng-Hyon;Kim Minsoo
    • Journal of the Korean Society for Precision Engineering
    • /
    • v.22 no.4
    • /
    • pp.121-127
    • /
    • 2005
  • There is a necessity for the communication between intelligent robots and human beings because of wide spread use of them. Gesture recognition is currently being studied in regards to better conversing. On the basis of previous research, however, the gesture recognition algorithms appear to require not only complicated algorisms but also separate training process for high recognition rates. This study suggests a gesture recognition algorithm based on computer vision system, which is relatively simple and more efficient in recognizing various human gestures. After tracing the hand gesture using a marker, direction changes of the gesture trajectory were analyzed to determine the simple gesture code that has minimal information to recognize. A map is developed to recognize the gestures that can be expressed with different gesture codes. Through the use of numerical and geometrical trajectory, the advantages and disadvantages of the suggested algorithm was determined.

Efficient Detection of Scene Change and Anchorperson Frame in News Video (뉴스 비디오에서의 효율적인 장면 전환과 앵커 화면 검출)

  • Kang, Hyunchul;Lee, Jin-Sung;Lee, Wanjoo
    • Journal of KIISE:Software and Applications
    • /
    • v.32 no.12
    • /
    • pp.1157-1163
    • /
    • 2005
  • In this paper, an efficient and fast method to segment a video in the MPEG(motion picture expert group) video stream is proposed. For the real time processing of large amount of broadcasting data, we use DC images of I-frames in an MPEG compressed video with minimal decoding. Using the modified histogram comparison which counts on not only luminance but also chrominance information, the scene change detection was performed in the fast and accurate way Also, to discriminate anchorperson frame from non-anchor frame, a neural network method was introduced.

The Shop Floor Control Problem in Automated Manufacturing Systems : Determination of Machining Speed with Due Date of Parts (자동생산체제의 작업장운영문제에서 부품의 납기를 고려한 가공속도 결정)

  • 노인규;박찬웅
    • Journal of Korean Society of Industrial and Systems Engineering
    • /
    • v.19 no.39
    • /
    • pp.293-299
    • /
    • 1996
  • The breakdown of machines lead to the lateness of parts and the change of schedules. Its treatment is very important problem in the shop floor control system. In this study, we present an algorithm minimize the lateness, earliness and change of schedule by controlling machining speed of available machines. Production time and production cost required to manufacture a piece of product are usually expressed as a unimodal convex fuction with respect to machining speed, and each has its minimal point at the minimum time speed or the minimum cost speed, and a speed range between these two speeds is called 'efficiency speed range'. Therefore, the algorithm determines the machining speed in the efficiency speed range. An example is demonstrated to explain the algorithm.

  • PDF

Volume Change of the Dredged Materials in the Coastal Lagoon with Coagulants and Flocculants Injection (응집제 및 응결제 주입에 의한 석호 준설물질의 체적변화)

  • 조홍연;윤길림
    • Journal of Korean Society of Coastal and Ocean Engineers
    • /
    • v.14 no.3
    • /
    • pp.192-200
    • /
    • 2002
  • There is a volume change between the sediments and the dredged materials because the dredged materials is fully disturbed by the dredger and settled in the basin from the stabilized condition. The volume of the dredged materials is also affected by the coagulants and flocculants (hereafter C & F) which was used to speed up the settling of the suspended solids. In this study, the volume change of the dredged materials is analysed in detail due to the injection amount of the C & F. The dredged materials were sampled in the lagoon located in the East coastal zone, and the volume change of the samples is quantitatively analysed by the laboratory test due to the change of the clay content and the amount of the C & F. The optimal amounts of the C & F is determined by showing the minimal volume change due to C & F injection. From the experimental results, the volume of the dredged materials is increased 1.68 times on an average and the volume change rate is slightly increased, i.e., negligible, as the clay content increase in the case of the C & F injection.

Anchor Plate Efficiency in Postoperative Orthodontic Treatment Following Orthognathic Surgery via Minimal Presurgical Orthodontic Treatment

  • Jeong, Tae-Min;Kim, Yoon-Ho;Song, Seung-Il
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • v.36 no.4
    • /
    • pp.154-160
    • /
    • 2014
  • Purpose: The efficiency of an anchor plate placed during orthognathic surgery via minimal presurgical orthodontic treatment was evaluated by analyzing the mandibular relapse rate and dental changes. Methods: The subjects included nine patients with Class III malocclusion who had bilateral sagittal split osteotomy at the Division of Oral and Maxillofacial Surgery, Department of Dentistry in Ajou University Hospital, after minimal presurgical orthodontic treatment. During orthognathic surgery, anchor plates were placed at both maxillary buttresses. The anchor plates were used to move maxillary teeth backward and for maximum anchorage of Class III elastics to minimize mandibular relapse during the postoperative orthodontic treatment. The lateral cephalometric X-ray was taken preoperatively (T0), postoperatively (T1), and one year after the surgery (T2). Seven measurements (distance from Pogonion to line Nasion-Nasion perpendicular [Pog-N Per.], angle of line B point-Nasion and Nasion-Sella [SNB], angle of line maxilla 1 root-maxilla 1 crown and Nasion-Sella [U1 to SN], distance from maxilla 1 crown to line A point-Nasion [U1 to NA], overbite, overjet, and interincisal angle) were taken. Measurements at T0 to T1 and T1 to T2 were compared and differences tested by standard statistical methods. Results: The mean skeletal change was posterior movement by $13.87{\pm}4.95mm$ based on pogonion from T0 to T1, and anterior movement by $1.54{\pm}2.18mm$ from T1 to T2, showing relapse of about 10.2%. There were significant changes from T0 to T1 for both Pog-N Per. and SNB (P<0.05). However, there were no statistically significant changes from T1 to T2 for both Pog-N Per. and SNB. U1 to NA that represents the anterior-posterior changes of maxillary incisor did not differ from T0 to T1, yet there was a significant change from T1 to T2 (P<0.05). Conclusion: This study found that the anchor plate minimizes mandibular relapse and moves the maxillary teeth backward during the postoperative orthodontic treatment. Thus, we conclude that the anchor plate is clinically very useful.

Effect of Cryoprotectant Concentration and Equilibration Time on Volume Change and In Vitro Development of Intact and Bisected Mouse Embryos following Rapid Freezing (동결보호제의 농도와 평형시간이 생쥐의 정상배 및 분할배의 용적 변화와 체외 발달에 미치는 영향)

  • 이은봉;공일근;강대진;박충생
    • Korean Journal of Animal Reproduction
    • /
    • v.16 no.1
    • /
    • pp.47-53
    • /
    • 1992
  • This study was carried out to investage the effect of cryoprotectant concentration and equilibration time on volume change and in vitro development of intact and bisected mouse embryos by rapid freezing. When compacted morulae were rapidly frozen in 3.0 to 4.0 glycerol or DMSO with 0.25M sucrose solution, the superior(P<0.05) post-thaw survival rate was obtained at the glycerol concentration of 4.0M(89.4%) than 3.0M(71.4%) or 5.0M(42.4%), but at the DMSO concentration of 3.0M(84.5%) than 4.0M(51.1%) or 5.0M(0.0%). The optimal equilibraton time for rapid freezing of ZP-free or bisected morulae in 4.0M glycerol with 0.25M sucrose was found tobe 3 minutes. The minimal volume of compacted morulaewhich corresponded with 61 to 62% of pre-equilibrated embryo volume was obtained from equilibration for 3 minutes in both 3.0 and 4.0M glycerol solutions with 0.25M sucrose.

  • PDF

Evaluation of osseous changes of TMJ in internal derangement and osteoarthritis patients using MRI (자기공명영상을 이용한 악관절내장증환자와 악관절증환자의 골변화에 관한 연구)

  • Cho Su-Beom;Koh Kwang-Joon
    • Imaging Science in Dentistry
    • /
    • v.31 no.3
    • /
    • pp.159-164
    • /
    • 2001
  • Purpose: To evaluate the osseous changes of TMJ in internal derangement and osteoarthritis patients using MRI. Materials and Methods: MR images of 111 TMJs in 64 patients were analyzed to evaluate the osseous changes, 111 TMJs were divided into 6 groups according to the radiologic Stages by Schellhas and Wilkes. On MR images, we evaluate the osseous changes of articular eminence and condylar head. Results: The most frequent Stage in internal derangement of TMJ was Stage I. And 28 joints (25.2%) revealed osteoarthritis with internal derangement. When osseous change of articular eminence and condylar head occur, flattening was the most common osseous change. Sclerosis was observed in all Stages and osteophytosis of condylar head was observed in Stage II (1.8%) and III (0.9%). Out of 28 joints with osteoarthritis, 6 joints (21.4%) showed joint effusion. Conclusion: MR image revealed abnormal configuration of disk, but the detection of minimal osseous change was subtle.

  • PDF

Quality Change of Sliced Citron (Citrus junos Sieb.) according to Browning Inhibitor Treatment (갈변방지제 처리에 따른 슬라이스 유자의 품질 변화)

  • Lee, Bo-Bae;Cho, Hye-Sung;Cho, Youn-sup;Nam, Seung-Hee
    • The Korean Journal of Food And Nutrition
    • /
    • v.33 no.4
    • /
    • pp.419-427
    • /
    • 2020
  • The purpose of this study was to investigate the qualitative changes of the citron by identifying the type of solution and addition of the solution to prevent the browning reaction of the citron in a way that inhibits the browning of the citron. The browning inhibitor solution was investigated using the individual and mixture, and the results of the degree of browning and chromaticity showed that vitamin C+NaCl+cyclodextrin (CD) had the lowest browning of 0.52. In chromaticity, the ΔE values indicate that the higher the value, the greater the change in color, and the lowest value of the vitamin C+NaCl+CD mixture was 47.0, indicating that there was minimal browning compared to other treatment. The active change of the polyphenol oxidase (PPO) in the citron increased enzyme activity as the browning progressed, and the vitamin C+NaCl+CD solution was the lowest at 68.40 μ/g among the anti-browning solution. Based on these research results, it seems that the CD mixing solution can be used as a citron browning inhibitor.