• Title/Summary/Keyword: Miniature pressure

Search Result 61, Processing Time 0.024 seconds

Noise Phobia-Induced Relative Polycythemia in a Dog (개에서 소리공포증에 의해 발생한 상대적 적혈구증가증 증례)

  • Kang, Min-Hee;Park, Hee-Myung
    • Journal of Veterinary Clinics
    • /
    • v.29 no.6
    • /
    • pp.494-497
    • /
    • 2012
  • A 6-year-old castrated male Miniature Pinscher dog was referred due to shaking, panting and inappropriate elimination during thunderstorms. The dog had noise phobia after a car accident two years ago. The intensity of the fear of noise, especially with thunderstorms, worsened during the past 3 months (thunderstorm season). Physical examination revealed hyperthermia, tachypnea (panting), mild tachycardia, and an elevated systolic blood pressure. Laboratory examination revealed mild polycythemia with a lower oxygen pressure and saturation. Based on the history, physical examination, and laboratory tests, the dog was diagnosed as a noise phobia concurrent with relative polycythemia. Treatment was initiated with behavior modification with desensitization, counter-conditioning, and medication. Music therapy was also used and appeared to be beneficial. Clinical signs including polycythemia are improved. This case indicates that relative polycythemia can be occurred by chronic mental stress, such as noise phobia in a dog.

Effects of Salinity on Leaf Growth and Photosynthesis in Rice (염처리가 수도잎의 신장 및 광합성능에 미치는 영향)

  • Lee, Kang-Sae
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.36 no.1
    • /
    • pp.22-33
    • /
    • 1991
  • The studies aimed to distinguish between initial (ionic or osmotic) effects of salinisation on growth and the longer-term consequences of excessive salt accumulation. Tall and dwarf varieties of rice were used to provide different growth rates. There was no significant effect upon the day-to-day pattern of growth, upon the ultimate length of leaves that were developing at the time of, or shortly after, salinisation with 50 mM NaCl. Leaves that developed after prolonged exposure of the plants to salinity were shorter. Addition of NaCl, KCl or mannitol to the root medium brought about a cessation of leaf elongation within one minute. Growth at a reduced rate restarted abruptly after a lag period that depended upon the external concentration. Elongation rate recovered to its original value within 24 hours after exposure to 50 mM NaCl, though not at higher concentrations. Addition of NaCl at concentrations up to 100 mM elicited no short-term effect upon photsynthetic gas exchange. No change in turgor pressure was detectable in the growing zone with the resolution of the miniature pressure probe used (about 70 kPa). It is concluded that the initial growth reduction in rice caused by salinisation is due to a limitation of water supply. A clear distinction is made between the initial effects of salt which are recoverable, and the long-term effects which result from the accumulation of salt within expanded leaves.

  • PDF

Evaluation of the Seismic Stability of Fill Dam by Shaking Table Tests (진동대 시험을 통한 Fill Dam의 내진 안정성 평가)

  • Yoon, Won-Sub;Chae, Young-Su;Park, Myeon-Gu
    • Journal of the Korean Geosynthetics Society
    • /
    • v.10 no.4
    • /
    • pp.81-92
    • /
    • 2011
  • In order to understand evaluation of the seismic stability of a fill dam, we made chambers of 1:100, 1:70, and 1:50 (the ratio of the miniature), considering the law of similarity based on drawings of three representative cross sections. And we measured an increase in acceleration, excess pore water pressure, and vertical/horizontal displacement after applying Hachinohe wave (long period), Ofunato wave (short period), and artificial wave, complying with the domestic standards, in order to evaluate the stability and interaction between the ground, the structure, and fluids based on the measurements. As a result, we could observe that displacement of the target cross section was relatively small compared to the allowed level of 30 cm, ensuring proper stability for an earthquake. Regarding the acceleration measurements, the increase rate was 20% for Hachinohe wave and Ofunato wave but 30% for the artificial wave. With respect to the excess pore water pressure, it was lower than 1 (which is the permissible ratio for liquefaction) ensuring proper stability as well.

Spray Characteristics of Supersonic Liquid Jet by a Nozzle Geometry of Miniature High-Pressure Injection System (축소형 초고압 분사 시스템의 노즐 형상에 따른 초음속 액체 제트 분무 특성에 관한 연구)

  • Shin, Jeung-Hwan;Lee, In-Chul;Kim, Heuy-Dong;Koo, Ja-Ye
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 2010.11a
    • /
    • pp.177-180
    • /
    • 2010
  • Two-stage light gas gun, sorted with Ballistic Range System, is used to research spray characteristics of supersonic liquid jets. When high pressure tube was pressurized to the 135 bar, diaphragm films which composed with OHP film are ruptured. Expansion gases accelerate a projectile approximately 250 m/s at the exit of pump tube. And accelerated projectile collides with liquid storage part and liquid jets were injected into supersonic conditions. Supersonic liquid jets show the multiple jets and generate shockwave at the forward region of jets. Supersonic liquid jets of speed and shockwave angle have different value at each case. Supersonic liquid jets with minimum velocities are injected with M=1.53 at the geometry condition of L/d=23.8.

  • PDF

Characteristics of $TiH_2$ under High Pressure (고압하에서 $TiH_2$의 특성화 연구)

  • Kim, Young-Ho
    • Journal of the Mineralogical Society of Korea
    • /
    • v.5 no.2
    • /
    • pp.72-78
    • /
    • 1992
  • The Earth outer core accomodates moderately considerable amount of lighter elements than pure iron itself. Hydrogen is one of the possible candidates of minor constituents in the outer core. It would be worth while to extend for the pressure effect on the solubility of hydrogen in the metal-hydrides including iron hydride. In view of hydrogen being one of the potential substitutes for petroleum, searching a more efficient way for storing hydrogen in the form of hydrides is of considerable value. For two purposes, $TiH_2$was selected among lot of hydrides for its characteristics under pressure and temperature. There have been two kinds of experiment carried out on $TiH_2$ under different experimental conditions. As one of these attempts, polycrystalline $TiH_2$ was loaded up to 15 GPa stepwise at the constant temperature 500${\circ}$ using a piston-cylinder diamond anvil cell equipped with a miniature furnace of an electric power supply. The X-ra diffraction technique was employed on the quenched samples after the simultaneous high pressure and temperature treatments. During these high pressure-temperature runs, and irreversible phase of $TiH_2$ has been observed at the pressures higher than 11.3 GPa, which would be assigned to the orthorhombic crystal system as one of the new phase(s) of $TiH_2$. Molar volume change on this phase transition is ∼10%.

  • PDF

Effect of Deposition Parameters on the Property of Silicon Carbide Layer in Coated Particle Nuclear Fuels (피복입자핵연료에서 증착조건이 탄화규소층의 특성에 미치는 영향)

  • Kim, Yeon-Ku;Kim, Weon-Ju;Yeo, SungHwan;Cho, Moon Sung
    • Journal of Powder Materials
    • /
    • v.23 no.5
    • /
    • pp.384-390
    • /
    • 2016
  • Tri-isotropic (TRISO) coatings on zirconia surrogate beads are deposited using a fluidized-bed vapor deposition (FB-CVD) method. The silicon carbide layer is particularly important among the coated layers because it acts as a miniature pressure vessel and a diffusion barrier to gaseous and metallic fission products in the TRISO-coated particles. In this study, we obtain a nearly stoichiometric composition in the SiC layer coated at $1400^{\circ}C$, $1500^{\circ}C$, and $1400^{\circ}C$ with 20 vol.% methyltrichlorosilane (MTS), However, the composition of the SiC layer coated at $1300-1350^{\circ}C$ shows a difference from the stoichiometric ratio (1:1). The density decreases remarkably with decreasing SiC deposition temperature because of the nanosized pores. The high density of the SiC layer (${\geq}3.19g/cm^2$) easily obtained at $1500^{\circ}C$ and $1400^{\circ}C$ with 20 vol.% MTS did not change at an annealing temperature of $1900^{\circ}C$, simulating the reactor operating temperature. The evaluation of the mechanical properties is limited because of the inaccurate values of hardness and Young's modulus measured by the nano-indentation method.

Retrospective Study of Anterior Lens Luxation in 8 Dogs (개의 수정체 전방 탈구 8례에 대한 후향적 연구)

  • Kim, Se-Eun;Park, Shin-Ae;Kim, Won-Tae;Jeong, Man-Bok;Chae, Je-Min;Park, Young-Woo;Seo, Kang-Moon
    • Journal of Veterinary Clinics
    • /
    • v.25 no.4
    • /
    • pp.292-294
    • /
    • 2008
  • The purpose of this study was to evaluate the cause of lens luxation and to determine the frequency of vision loss, glaucoma, cataract, and corneal edema before and after intracapsular lens extraction (ICLE). The medical records of 8 dogs underwent ICLE for the correction of anterior lens luxation at the Veterinary Medical Teaching Hospital of Seoul National University from August 2005 to September 2007 were reviewed. The most frequently affected breed was Miniature Poodle (n = 3). The mean age was $10.8{\pm}2.1$ years. Preoperatively, 5 eyes (67.5%) with anterior luxation had secondary glaucoma, 7 eyes (87.5%) had vision loss, and all eyes (100.0%) had corneal edema. Four weeks after ICLE, 6 eyes (75.0%) had normal intraocular pressure (IOP), and 4 eyes (50.0%) regained vision. Corneal edema was reduced after ICLE in all eyes, but still remained in 4 eyes. It was considered that ICLE was beneficial in the management of anterior lens luxation, but the eyes without glaucoma before ICLE had more favorable prognosis than eyes with.

Estimation of Coefficient of Consolidation Using Piezocone Dissipation Test in Normally Consolidated Clays (정규압밀점토에서의 피에조 콘 소산시험을 이용한 수평압밀계수의 산정)

  • 임형덕;이우진;김대규
    • Journal of the Korean Geotechnical Society
    • /
    • v.19 no.5
    • /
    • pp.145-154
    • /
    • 2003
  • In this study, the variation in excess pore pressure during dissipation is estimated by using successive cavity expansion theory and finite difference technique based on axisymmetric uncoupled linear consolidation theory with separate consideration of magnitude and initial distribution $\Delta{u}_{oct}$induced by changes of octahedral normal stress, and $\Delta{u}_{shear}$ induced by changes of octahedral shear stress. The coefficient of consolidation is also estimated by trial and error procedure until the predicted dissipation curve matches the measured curve at a typical degree of dissipation. The proposed method is applied to the results of miniature piezocone tests at Louisiana State University calibration chamber system. Based on the results of interpretation and the comparison with experimental measurements and those from other solutions, the prediction dissipation curves show a good match with those measured during dissipation tests and the values of coefficient of consolidation estimated by proposed method are more close to the range of laboratory measurements than those of other theories.

Effect of Deposition Temperature on the Property of Pyrolytic SiC Fabricated by the FBCVD Method (유동층 화학기상증착법을 이용하여 제조된 열분해 탄화규소의 특성에 미치는 증착온도의 영향)

  • Kim, Yeon-Ku;Kim, Weon-Ju;Yeo, SungHwan;Cho, Moon-Sung
    • Journal of Powder Materials
    • /
    • v.21 no.6
    • /
    • pp.434-440
    • /
    • 2014
  • Silicon carbide(SiC) layer is particularly important tri-isotropic (TRISO) coating layers because it acts as a miniature pressure vessel and a diffusion barrier to gaseous and metallic fission products in the TRISO coated particle. The high temperature deposition of SiC layer normally performed at $1500-1650^{\circ}C$ has a negative effect on the property of IPyC layer by increasing its anisotropy. To investigate the feasibility of lower temperature SiC deposition, the influence of deposition temperature on the property of SiC layer are examined in this study. While the SiC layer coated at $1500^{\circ}C$ obtains nearly stoichiometric composition, the composition of the SiC layer coated at $1300-1400^{\circ}C$ shows discrepancy from stoichiometric ratio(1:1). $3-7{\mu}m$ grain size of SiC layer coated at $1500^{\circ}C$ is decreased to sub-micrometer (< $1{\mu}m$) $-2{\mu}m$ grain size when coated at $1400^{\circ}C$, and further decreased to nano grain size when coated at $1300-1350^{\circ}C$. Moreover, the high density of SiC layer (${\geq}3.19g/cm^3$) which is easily obtained at $1500^{\circ}C$ coating is difficult to achieve at lower temperature owing to nano size pores. the density is remarkably decreased with decreasing SiC deposition temperature.

Ahmed Valve Implantation for Early Glaucoma Treatment in Dogs (개의 초기 원발성 녹내장안에서 Ahmed valve 이식술의 적용)

  • Park, Shin-Ae;Jeong, Man-Bok;Park, Young-Woo;Kim, Won-Tae;Kim, Se-Eun;Seo, Kang-Moon
    • Journal of Veterinary Clinics
    • /
    • v.25 no.5
    • /
    • pp.385-390
    • /
    • 2008
  • The purpose of this study was to compare the long term prognosis of Ahmed valve implantation and medical therapy in dogs with early primary glaucoma. The medical records of dogs with early primary glaucoma from the Veterinary Medical Teaching Hospital of Seoul National University between January 2005 and May 2008 were reviewed. Five dogs underwent Ahmed valve implantation and medical therapy was performed in six dogs. Breeds of the dogs included Shih Tzu(n = 7), American cocker spaniel(n = 2), and miniature poodle(n = 2). Adequate intraocular pressure(IOP) was better maintained in the Ahmed valve implantation group than in the medical treatment group throughout the follow-up period. Mean time for vision loss to develop after treatment in the Ahmed valve implantation group($198.0{\pm}115.4$ days) was significantly longer than that in medical treatment group($43.2{\pm}30.4$ days, p < 0.05). Post-operative complications included occlusion of the tube by fibrin in the anterior chamber (n = 1), fibrous capsule about the episcleral base of the device(n = 1), and dislocation of the valve body(n = 1). It is considered that Ahmed valve implantation is more effective strategy to control IOP and maintain vision than medical treatment in early glaucomatous dogs.