• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.31 no.5
• /
• pp.457-466
• /
• 2007

A numerical and experimental study on the evaluation and the prediction of cleanliness level in the mini-environment system was carried out. Using the concept of local mean air-age (LMA) and effective flow rate, the new direct method for estimating the mini-environment was developed and compared with the previous performance index of airflow pattern characteristics. It was found out that the airflow pattern analysis is a restricted method to estimate the real performance of the mini-environment. The reason is that the airflow pattern cannot predict the effect of the increment of the ventilation rate on the cleanliness level in the mini-environment. While LMA is capable of showing the effects of the contaminant accumulation caused by turbulent intensity, eddy, and the increment of the effective flow rate. This result showed that LMA is more exact and effective performance index than the previous one like the airflow pattern characteristics.

• The Journal of Korean Association of Computer Education
• /
• v.16 no.6
• /
• pp.111-120
• /
• 2013

Programming novices have various difficulties when they learn C language for the first time. Novices have a large burden for understanding of a C language grammar, and have a tendency to focus on the grammar rather than problem solving. Moreover, it requires programming domains to arouse student's interest for software development. This paper presents a programming environment for C languages education focusing on a problem solving. To this end, this paper defines Tiny-VPL that is a simple visual programming language for NXT robot programming and presents robot programming environment using Tiny-VPL. This paper also presents an environment for NXT robot programming using Mini-C language which is a subset of C language. For the purpose of helping to understand the C syntax and semantics, the visual and interactive conversion system of Tiny-VPL to Mini-C is provided. Our programming environment can arouse student's interest through robot programming and can be used effectively for C language education focusing on problem solving with graphical and interactive conversion of the visual language Tiny-VPL to the textual language Mini-C.

• Journal of Bio-Environment Control
• /
• v.1 no.2
• /
• pp.175-180
• /
• 1992

Cherry tomatoes(Lycopersicon esculentum) were grown in circulating deep flow hydroponic system. The pH of the nutrient solution was increased and the EC was decreased with time. The clusters of ‘Mini Carol’ were branched severely, whereas those of ‘Chelsea Mini’ and ‘Popo’ were a little branched or not. The vegetative growth was similar between cultivars. But the yield of fruits was by far the largest in ‘Mini Carol’ compared to other cultivars, and not different between ‘Chelsea Mini’ and ‘Popo’. Internal qualities of fruits, like as sugar, sugar/organic acid, and vitamin C, are good in ‘Mini Carol’. As the result of panel test, ‘Mini Carol’ is good for softness, easeness of eating, toughness of skin and so on, so it is believed that ‘Mini Carol’ is the most acceptable to consumers in hydroponic culture.

• Asia Pacific Journal of Business Review
• /
• v.4 no.1
• /
• pp.45-60
• /
• 2019

Proposing that the main barriers to mini-packaging success in China, in contrast to India and the Philippines, is Chinese consumers' sociocultural values and attitudes toward products in mini packages, this study investigates the factors that potentially make the China market relatively not conducive to buying products in mini packages via a survey of 468 Chinese adults in Shanghai (first-tier city) and Zhuhai (second-tier city). Results show that respondents agree that products in mini packages are difficult to store once opened, are more expensive than are larger-sized products, do not provide good value for money, entail frequent shopping, are harmful to the environment, are not advertised, and are mainly for trying new products and for traveling. They disagree with many possible reasons for the unpopularity of products in mini packages. This study's contributions are (1) providing in-depth quantitative analysis of the possible reasons mini-packaging is not popular in China, (2) offering managerial advice for using mini-packaging to increase brand competitiveness, (3) developing a scale to measure attitudes toward products in mini packages; and (4) being empirical as opposed to merely anecdotal/speculative like some studies in this area.

• KIEAE Journal
• /
• v.6 no.4
• /
• pp.11-16
• /
• 2006

This work has carried out some preliminary studies for the utilization of a solar mini-dish system capable of concentrating solar rays to higher densities. A typical mini-dish system considered employs an array of solar mini-dishes where major components are light and compact. It consists of small mini-dishes, optical fiber bundles and diffusers at the end. Each mini-dish (typically has a 20 to 30 cm in diameter) is designed with a simple parabolic profile, concentrating sunlight (after the glass glazing cover to avoid dust deposition on the reflector and facilitate cleaning) onto a centrally-located small mirror which is placed on the bottom side of the transparent glass cover. The focused sunlight is reflected by the mirror surface onto a focal point where the receiving aperture of a homogenizer is located. Optical fibers are used to carry high-density solar rays to the other end where diffusers are mounted for indoor illumination. The proposed high density mini-dish system could make an efficient daylighting system as it excludes large moving parts and expandable if necessary. Each component of the system could be made from the off-the-shelf technology and thus, make the generic unit inexpensive to manufacture. Depending on spatial demand or characteristics, the amount of introducing daylight could be controlled. Preliminary tests have been carried out for a trial system to check any functional problems when in operation. Suggestions are also made to improve the design enhancing its performance and applicability.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.6A
• /
• pp.685-692
• /
• 2008

In this paper, we propose a timing recovery loop for Inmarsat mini-m system downlink receiver. Inmarsat mini-m system requires a timing recovery loop which is robust in frequency offset and has fast acquisition because Inmarsat mini-m system specification requires frequency tolerance is required of ${\pm}924$ Hz (signal bandwidth: 2.4 kHz) and acquisition time of UW (Unique Word) signal duration (15ms).Therefore, we propose a timing recovery loop which is suitable for Inmarsat mini-m system. The proposed timing recovery loop adopted noncoherent UW detector and differential ELD which applied differential UW signal for stability and fast acquisition in frequency offset environment. Simulation results show that the proposed timing recovery loop has stable operation and fast acquisition in frequency offset environment for the system.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.4
• /
• pp.21-26
• /
• 1993

Network systems are of fundamental importance in programmable device in industrial automation, as they essential in order to active group management of integration and coordination. In this papers,MMS implemented on the basis ISO specification for industrial environment. In the MMS-MAP, MMS is situated in the application layer and on the datalink layer. This implemented software was operated with network interface unit which was designed in group objects and service primitives for group management network model system. This function of designed module showed possibility of operation through group state diagram transition in the Mini-MAP environment.

• Journal of Bio-Environment Control
• /
• v.6 no.3
• /
• pp.198-204
• /
• 1997

This study was conducted to investigate the effect of solution culture systems on growth and mini-tuber yields of hydroponlcally grown potato (Solanum tuberosun L. cv. Dejima). The growth of stem and foliage at 40 and 60 days after planting were better in aeroponics system than the other systems, and stem length and number of stems per plant at 90 days after planting were the greatest as of 65.4 cm, 7.3 in aeroponics and the lowest as of 49.5 cm, 3.2 in scoria media system. Stolon length was the longest as of 30.4 cm in aeroponics at 90 days after planting, and number of stolons was the greatest as of 10.5 in NFT. Number of mini-tubers per plant at 90 days after planting was 67.1, 62. 5, 20.1 and 18.0 in aeroponics, NFT, perlite and scoria media, respectively. The perlite media system made the fewest enlargement of lenticels of mini-tubers. The results indicate that aeroponic system can be used effectively for mini-tuber potato production.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.6
• /
• pp.536-541
• /
• 2015

In this paper, we propose a the image-based automatic flight control system for the mini drone. Automatic flight system with a camera on the ceiling and markers on the floor and landing position is designed in an indoor environment. Images from the ceiling camera is used not only to recognize the makers and landing position but also to track the drone motion. PC sever identifies the location of the drone and sends control commands to the mini drone. Flight controller of the mini drone is designed using state-machine algorithm, PID control and way-point position control method. From the, The proposed automatic flight control system is verified through the experiments of the mini drone. We see that known makers in environment are recognized and the drone can follows the trajectories with the specific ㄱ, ㄷ and ㅁ shapes. Also, experimental results show that the drone can approach and correctly land on the target positions which are set at different height.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.342-346
• /
• 1991

산업공정현장에서는 독립적으로 운영되고 있는 프로그램식 단위제어기기들에 대한 연계운영을 위하여 실시간 처리 소규모 네트워크가 도입되어 구축운영되고 있다. 특히 제조생산공정에서는 계층화된 분산 구조로서 공정정보처리를 위하여 공장환경에 적절한 네트워크 구축을 MAP등의 표준화된 규격에 의하여 권고되고 구현되어 운영되고 있다. 본 논문에서는 공장 환경에서의 표준규격으로 제안된 Mini MAP을 기준으로 하여 물리 및 데이타 링크계층을 Petrinet 기법을 활용하여 실시간 처리를 위한 개선된 모델을 제안하고 네트워크의 성능측정 및 시뮬레이션을 수행하였다. 또한 이 모델에 의하여 토큰버스 네트워크를 구성하여 전송 서비스시간과 메세지 처리율을 분석하고 Mini MAP 규격과 함께 성능을 해석하였다.