• Food Science and Preservation
• /
• v.15 no.1
• /
• pp.161-168
• /
• 2008

The effects tea beverages (TBs) prepared from powdered green tea (Gt), oolong tea (Ot), black tea (Bt), or pure tea (Pt) with lemon, orange, grenadine etc on cadmium toxicity in rats were investigated Sensory evaluations of the TBs are better than those of each water extracted teas. Cadmium (50 ppm) was administered to experimental rats fed a basic diet, or a diet with various TBs (15% w/v), for 5 weeks. Although body weight gains, feed intakes, and fecal weights in all Cd-treated groups were lower than those in the normal control group (NC), feed efficiency ratio, urine volumes, liver weights, and kidney weights did not differ significantly between groups. The serum ALT and AST levels in the Cd-treated control group (Cd-Co) were higher than those in the NC animals. Serum ALT and AST levels in all Cd-treated rats fed TB-supplemented diets were lower than in animals of the Cd-Co group. Tibia and femur weights in Cd-Co animals were lower than those in NC rats. Tibia and femur weights in Cd-treated rats fed TB-supplemented diets were higher than those in Cd-Co animals. There were no between-group differences in tibia lengths; animals in the NC and TB-supplemented diet groups showed femur lengths longer than those of Cd-Co rats. Although the contents of crude ash and cadmium in the femurs of Cd-Co mts was markedly higher than in the femurs of NC animals, the cadmium content in femurs of Cd-Co rats was significantly lower than that in the femurs of NC animals. The changes in mineral levels caused by Cd administration were alleviated by every TB-supplemented diet tested Whereas fecal calcium excretion by Cd-Co animals was significantly higher than that of NC rats, calcium excretion by Cd-treated rats fed TB-supplemented diets was significantly lower than that of Cd-Co animals. Fecal cadmium excretion by all Cd-treated rats fed TB-supplemented diets was significantly higher than that of Cd-Co animals. In conclusion, this study provides experimental evidence that various TBs may regulate cadmium-induced organ toxicity by reducing cadmium accumulation in tissues through the mechanism of increasing the fecal excretion of cadmium.

• The Journal of Engineering Geology
• /
• v.25 no.4
• /
• pp.557-576
• /
• 2015

Groundwaters in granite, gneiss, and two-mica granite formations, including faults, in the Hoengseong area are examined to determine the relationship between their uranium and radon-222 contents and rock types. The chemical compositions of 38 groundwater samples and four surface water samples collected in the study area were analyzed. Sixteen of the samples showing high uranium and radon-222 contents were repeatedly analyzed. Surface radioactivities were measured at 30 points. The uranium and radon-222 concentrations in the groundwater samples were in the ranges of 0.02-49.3 μg/L and 20-906 Bq/L, respectively. Four samples for uranium and 35 samples for radon had concentrations exceeding the alternative maximum contaminant level of the US EPA. The chemical compositions of groundwaters indicated Ca(Na)-HCO₃ and Ca(Na)-NO₃(HCO₃+Cl) types. The pH values ranged from 5.71 to 8.66. High uranium and radon-222 contents in the groundwaters occurred mainly at the boundary between granite and gneiss, and in the granite area. The occurrence of uranium did not show any distinct relationship to that of radon-222. The radon-222, an inert gas, appeared to be dissolved in the groundwater of the aquifer after wide diffusion along rock fractures, having been derived from the decay of uranium in underground rocks. The results in this study indicate that groundwater of neutral or weakly alkaline pH, under oxidizing conditions and with a high bicarbonate content is favorable for the dissolution of uranium and uranium complexes such as uranyl or uranyl-carbonate.

• Journal of the Mineralogical Society of Korea
• /
• v.30 no.4
• /
• pp.149-159
• /
• 2017

We investigated the mineralogical and chemical characteristics of oyster shell as the possible substitute for the limestone used as an absorbent of $SO_2$ gas. The oyster shells from Taean and Tongyeong were used for the comparison with limestone and those from Boyreong and Yeosu were additionally investigated. XRD results show that all shells are composed of calcite with the exception of the myostracum layer attached to adductor muscle and ligament, which is composed of aragonite. The marine sediments as impurities exist on the surface of shells or as inclusions in the shells. Calcite is the main mineral composition of the shell of barnacle which is also one of the impurities. The oyster shell is composed of three main layers; prismatic, foliated, and chalk. The oyster shell from Tongyeong with the largest shell size, has the smallest thickness of prismatic and foliated layers which contain protein called conchiolin, whereas that from Taean with the smallest shell size has the largest prismatic and foliated layers. The sizes of those two layers of the shells from Boryeong and Yeosu are larger than that from Tongyeong but smaller than Taean. Those differences are supposed to be due to the different growth environments because the oysters from Tongyeong are cultured under the sea while those from Taean are in the tidal zone. The oyster shells generally show higher amount of sulfur and phosphorus than limestone, mainly due to the composition of protein. Some elements such as Mg show significant variations in different layers. As for trace elements, Li shows much higher amount in oyster shells than limestone, suggesting the influence of the composition of the sea water on the formation of the oyster shells.

• Korean journal of food and cookery science
• /
• v.19 no.5
• /
• pp.603-608
• /
• 2003

In approximate composition, crude protein, lipid, ash, crude fiber, and N-free extract constituted 14.70%, 3.10%, 6.90%, 18.20%, and 57.10%, respectively, in Korean safflower flowers, compared to 12.60%, 2.70%, 5.80%, 16.40% and 62.50%, respectively, in Chinese safflower flowers. This indicated that Korean safflower flowers surpassed their Chinese counterparts except in terms of N-free extract. Free sugars such as fructose, glucose, and sucrose were proven to be dominant in both domestic and Chinese safflower flowers, while little xylose was contained. For content of polyphenolic compound, Korean safflower flowers contained 13.85% water soluble extract and 9.70% MeOH extract, compared to 9.39% and 7.04%, respectively, for the Chinese variety, confirming the higher levels in the Korean variety. For fatty acids, (Ed- the following results are not presented in ratio form) saturated fatty acids and unsaturated fatty acids comprised 6.80% and 93.20% in Korean safflower flowers and 16.0% and 84.0% in Chinese safflower flowers, respectively. Linoleic, oleic, and palmitoleic acids comprised 75.30%, 11.60%, and 3.40% in Korean safflower flowers, and 66.70%, 11.20%, and 6.10% in the Chinese variety, respectively. Of amino acids, essential amino acids comprised 46.67% in Korean safflower flowers and 36.79% in the Chinese variety. Moreover, total essential amino acids in Korean safflower flowers were higher than those of their counterparts. Non-essential amino acid comprised 65.17% in the Korean variety and 54.49% in the Chinese. In terms of mineral content, Korean safflower flowers contained more Ca, Cu, Fe and Mn than those of China, while Chinese safflower flowers contained more A1, Ba, Mg, K, Na, Zn, Sr and P.

• Food Science of Animal Resources
• /
• v.28 no.4
• /
• pp.422-430
• /
• 2008

This study was conducted to investigate the nutritional composition and meat quality properties of Hanwoo steer beef by different cut. Ten cuts [Abjin (short plate), Bosup (top sirloin), Cheggt (striploin), Dngsim (loin), Guri (chuck tender), Hongduke (eye of round), Moksim (chuck roll), Sulgit (bottom round), Udoon (top round), Yanaji (brisket)] prepared from 10 Hanwoo steers (28-30 months old) were used for this experiment. The range of pH was 5.46-5.64. In the chemical analysis, Hongduke contained highest protein contents (21.15%) and Dngsim had lowest protein contents (16.94%) (p<0.05). Fat contents were higher in Dngsim whereas those of Guri, Hongduke and Udoon were significantly lower when compared to the other cuts (p<0.05). There were not significantly different in meat color (L, a and b values) properties only except that L values were significantly higher in Dngsim among 10 cuts (p<0.05). Cooking loss (%) was higher in Guri, Hongduke, Udoon and Yangji whereas it was significantly love. in Cheggt (p<0.05). Warner-Bratzler shear force (WBS) was significantly higher in Abjin $(6.24inch^2/kg)$, whereas Dngsim $(3.45inch^2/kg)$ and Cheggt $(3.50inch^2/kg)$ were significantly lower than the other cuts (p<0.05). There was no significant difference in water-holding capacity (WHC) among 10 cuts (p>0.05). Total amino acid contents were significantly higher in Hongduke (p<0.05). Hongduke was highest in most kinds of amino acids, however, Udoon had the highest methionine and histidine contents among 10 cuts (p<0.05). Glutamate contents were high in all cuts and followed by aspartate, leucine and lysin. With regard to mineral contents, Ca was ranged from 47.63-70.69 mg/kg and Fe was ranged from 15.09-26.68 mg/kg in 10 cuts. Zn was highly contained in Guri (50.56 mg/kg) when compared to the other cuts (p<0.05).

• Journal of Nutrition and Health
• /
• v.50 no.3
• /
• pp.294-301
• /
• 2017

Purpose: The purposes of this study were to investigate food consumption practices and analyze factors that influence customer satisfaction of an HACCP applied restaurant in a highway service area. Methods: A total of 207 customer responses were used for data analysis. Statistical analyses were conducted using the SPSS program (ver. 22.0) for $x^2$-test, Pearson correlation analysis, and multiple regression analysis. Results: Reasons for visiting the highway area were using the restroom (86.0%), purchasing of meals or snacks (70.1%), taking a rest (58.5%), and shopping (3.4%) and selection attributes of food sold in the highway service area were food taste (48.8%), food safety (33.3%), and waiting time for meal (10.7%). According to the results of the survey, udon (66.2%) was the most preferred meal, followed by instant noodles (56.0%), kimbap (50.7%), pork cutlet (38.2%), and bibimbap (29.0%). In addition, coffee (73.4%) was the most preferred among snacks and beverages, followed by beverages (58.9%), walnut cake (53.1%), mineral water (52.2%), and hotbar (52.2%). Satisfaction evaluation scores of foods sold in the highway service area were highest for appropriate portion size, followed by food safety, menu variety, food taste, and reasonable price. Overall customer satisfaction scores regarding the restaurant in the highway service area was 3.24 out of 5 points on average. According to the results of the multiple regressing analysis, food taste (p < 0.001) and reasonable price (p < 0.01) had significant positive effects on overall customer satisfaction. Conclusion: To enhance customer satisfaction, restaurant managers in the highway service area should implement HACCP, improve food taste, and set up a proper price for food sold at the restaurant in the highway service area.

• Resources Recycling
• /
• v.15 no.4 s.72
• /
• pp.3-12
• /
• 2006

The feasibility for the employment of manganese nodule as an adsorbent for $SO_{2}$ gas has been investigated. The specific surface area of manganese nodule particle, which used in the experiments, was ca. $221.5m^{2}/g$ and the content of sulfur in manganese nodule was observed to significantly increase after $SO_{2}$ was adsorbed on it. The EPMA for the distilled water-washed and methanol-washed manganese nodule particle after $SO_{2}$ adsorption showed that its sulfur content was slightly decreased to 14.7% and 13.1% respectively, from 15.4% before washing. The XRD analysis of manganese nodule showed that todorokite and birnessite, which are manganese oxides, and quartz and anorthite were the major mineralogical components and weak $MnSO_{4}$ peaks were detected after $SO_{2}$ was adsorbed on manganese nodule. For an comparative investigation, limestone was also tested as an adsorbent for $SO_{2}$, however, no peaks for $CaSO_{4}$ were found by XRD analysis after the adsorption of $SO_{2}$. As the size of adsorbent increased, time for breakthrough was decreased and the adsorbed amount of $SO_{2}$ was also diminished. The $SO_{2}$ adsorption was hindered when its flow rate became high and the adsorption capacity of manganese nodule was observed to be superior to that of limestone. In addition, the mixture of manganese nodule and limestone did not show an increase in the adsorption of $SO_{2}$. Finally, as the temperature was raised, the adsorbed amount of adsorbate on manganese nodule was found to be decreased.

• Korean Journal of Remote Sensing
• /
• v.14 no.4
• /
• pp.353-365
• /
• 1998

Light absorption coefficient per unit mass of particles, i.e., specific absorption coefficient, is important as one of the main parameters in developing algorithms for ocean color remote sensing. Specific absorption coefficient of chlorophyll ($a^*_{ph}$) and suspended sediment ($a^*_{ss}$) were analyzed with a spectrophotometer using the "wet filter technique" and "Kishino method" for the seawater collected in the Yellow and Mediterranean Sea. An improved data-recovery method for the filter technique was also developed using spectrum slopes. This method recovered the baselines of spectrum that were often altered in the original methods. High $a^*_{ph}({lambda})$ values in the oligotrophic Mediterranean Sea and low values in the Yellow Sea were observed, ranging 0.01 to 0.12 $m^2$/mg at the chlorophyll maximum absorption wavelength of 440 nm. The empirical relationship between $a^*_{ph}$(440nm) and chlorophyll concentrations () was found to fit a power function ($a^*_{ph}$=0.039 $^{-0.369}$), which was similar to Bricaud et al. (1995). Absorption specific coefficients for suspended sediment ($a^*_{ss}$) did not show any relationship with concentrations of suspended sediment. However, an average value of $a^*_{ss}$ ranging 0.005 - 0.08 $m^2$/g at 440nm, was comparable to the specific absorption coefficient of soil (loess) measured by Ahn (1990). The morepronounced variability of $a^*_{ss}$ than $a^*_{ph}$ was determined from the variable mixing ratio values between particulate organic matter and mineral. It can also be explained by a wide size-distribution range for SS which were determined by their specific gravity, bottom state, depth and agitation of water mass by wind in the sea surface.

• Clean Technology
• /
• v.27 no.4
• /
• pp.359-366
• /
• 2021

Halloysite nanotubes (HNTs), the multiwalled clay mineral with the composition of Al₂Si₂O₅(OH)₄·nH₂O, have been highlighted as a low-cost adsorbent for the removal of dyes from wastewater. Although a powder of halloysite presents a high specific surface area, forming media are significantly considered due to sludge-clogging induced by the water-bound agglomeration. However, higher firing temperature to achieve the structural durability of the media and lower utilization rate due to longer penetration depth into the media act as hurdles to increase the dye-adsorption capacity. In this work, the retention of the adsorption capacity of halloysite was evaluated with methylene blue solution after the heat treatment at 750 ℃. In order to improve the utilization rate, tubular media were fabricated by extrusion. The images taken by transmission electron microscopy show that HNTs present excellent structural stability under heat treatment. The HNTs also provide superb capacity retention for MB adsorption (93%, 18.5 mg g^-1), while the diatomite and Magnesol^® XL show 22% (7.65 mg g^-1) and 6% (11.7 mg g^-1), respectively. Additionally, compositing with lignin enhances adsorption capacity, and the heat treatment under the hydrogen atmosphere accelerates the adsorption in the early stage. Compared to the rod-type, the tubular halloysite media rapidly increases methylene blue adsorption capacity.

• Journal of the Mineralogical Society of Korea
• /
• v.31 no.4
• /
• pp.267-275
• /
• 2018

The purposes of this study were to analyze the mineralogical characteristics of slaked lime used for wall repair of traditional buildings in Bagan, Myanmar and to evaluate the physical properties of lime plaster produced by the same method as Bagan region. In the X-ray diffraction and thermal analysis of the Myanmar slaked lime, portlandite ($Ca(OH)_2$) and brucite ($Mg(OH)_2$) were detected as main constituent minerals, and a carbonate rock mainly composed of dolomite ($CaMg(CO_3)_2$) minerals may be used as a raw material to make slaked lime. The field-emission scanning electron microscope analysis showed that the Myanmar slaked lime was composed of irregularly shaped crystals of $0.5{\mu}m$ or larger and a small amount of $0.1{\mu}m$ of plate - like crystals. The size and uniformity of crystals in Myanmar lime is different from that of Korea slaked lime. This may be attributed to the effect of the mineral composition and the lime hydration method of Myanmar, which produces slurry by immersing the burnt lime in excess water for a long period of time. The compressive strength of the lime plaster in Myanmar resulted in a mean value of $1.13N/mm^2$ for the specimens cured for 28 days. The strength of the specimens with Bale juice was $1.03N/mm^2$, respectively. The lime is an air setting material that exhibits strength through long carbonation process. Therefore, it is necessary to evaluate physical properties according to curing period through long-term curing over 28 days in the future.