• Analytical Science and Technology
• /
• v.33 no.1
• /
• pp.42-48
• /
• 2020

Bromate is a disinfection by-product generated mainly from the oxidation of bromide during the ozonation and disinfection process in order to remove pathogenic microorganism of drinking water, and classified as a possible human carcinogen by International Agency for Research of Cancer (IARC) and World Health Organization (WHO). For the purpose of determining the trace level concentration of bromate, several sensitive techniques are applied mostly based on suppressed conductivity detection and UV/Visible detection after postcolumn reaction (PCR). In this study, the suppressed conductivity detection method and the PCR-UV/Visible detection method through the triiodide reaction were compared to analyze the trace bromate in water samples and estimated for the availability of these analytical methods. In addtion, the state-of-the-art techniques was applied for the determination of trace level bromate in various water matrices, i.e., soft drinking water, hard drinking water, mineral water, swimming pool water, and raw water. In comparison of two analytical methods, it was found that the conductivity detection had the suitable advantage to simultaneously analyze bromate and inorganic anions, however, the bromate might not be precisely quantified due to the matrix effect especially by chloride ion. On the other hand, the trace bromate was analyzed effectively by the method of PCR-UV/Visible detection through triiodide reaction to satisfactorily minimize the matrix interference of chloride ion in various water samples, showing the good linearity and reproducibility. Furthermore, the method detection limit (MDL) and recovery were 0.161 ㎍/L and 101.0-108.1 %, respectively, with a better availability compared to conductivity detection.

• Journal of Preventive Medicine and Public Health
• /
• v.5 no.1
• /
• pp.37-42
• /
• 1972

Mountain Wells are very important water source for the most of the climbers in Seoul area. But the facilities around the wells are not modernized to prevent from contamination of microorganism and the other pollutants. We focussed our intention on the detection of some harmful chemical ingredients and contaminants. A total of 58 wells were examined according to the Standard Methods(APHA) and the following results were obtained: 1) Among the examined 58 wells, only 10 wells were adequate to the drinking water standard, 2) 7.9mg of liberated $CO_2$ was found in the Tchun-Ho-Dong Mineral Well, 3) Chemically harmful ingredients were not found, 4) The Mountain Wells were contaminated by Coliform groups as many as 18 times than rural wells.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.5
• /
• pp.507-512
• /
• 2005

This research focuses on the development and application of a method for the detection of m-toluate in soils using a genetically engineered bioluminescent bacteria, Pseudomonas putida mt-2 KG1206. KG1206 produces light by direct (m-toluate and benzoate) and indirect (toluene analogs) inducers. For detection of m-toluate in soil system, 9.9 mL strain was amended with 0.1 mL soil ethanol extractant. A high correlation ($r^2>0.97$) was observed between bioluminescence and m-toluate concentration. The unknown concentrations of m-toluate in soil samples were pre-determined using a method developed based on bioluminescence activity of strain with extracted inducers. Values between by LC analysis and bioluminescence activity show moderate statistical results. These results demonstrate the feasibility of recombinant bioluminescent microorganism, engineered to generate a quantifiable bioluminescence signal in response to specific pollutants, may serve as combined sensing and reporting tools in environmental monitoring.

• Geophysics and Geophysical Exploration
• /
• v.8 no.2
• /
• pp.137-144
• /
• 2005

In this study, we offered the results of geophysical and geochemical survey on the municipal waste disposal area to delineate the size and extent of leachate contamination. Preliminary to intensive geochemical investigation, we performed two geophysical methods to characterize the survey area. Electromagnetic (EM) and magnetic method were used far site investigation. From the EM method, we can get the information of soil conductivity directly related to the leachate of the contaminations and from magnetic anomalies we can find the boundary of landfill which is not identified on the surface due to soil capping. The results of geophysical survey were well matched to those of geochemical method carried out inside and near the landfill. Electric conductivity (EC) of the groundwater sampled from low resistivity anomaly region of EM result was higher than background value and the border estimated from the magnetic survey showed good agreement with that estimated from the soil gas detection survey.

• Geophysics and Geophysical Exploration
• /
• v.9 no.3
• /
• pp.225-230
• /
• 2006

Fluid replacement and conductivity logging have been applied to three boreholes in coastal aquifer in order to identify permeable fractures and to estimate the origin of saline groundwater. Fluid replacement technique measures and monitors the change of borehole fluid conductivity with depth under ambient or pumping condition after replacing the original borehole fluid with different one (by pumping out original one and injecting simultaneously new one at the hole bottom). After the replacement of borehole fluid, the change of fluid conductivity can be the direct indicator of the intake flow of formation water through aquifer such as permeable fractures or porous formations. The conductivity profiles measured with times therefore indicate the locations of permeable zone or fractures within the open hole or the fully slotted casing hole. As a result of fluid conductivity logging for three boreholes at coastal area in Yeonggwang, Jeonam Province, it is interpreted that the seawater intrusion in this area is not by remnant saline groundwater after land reclamation but mainly by intrusion of saline water through fractured rock. This approach might be useful for assessing the characteristics of seawater intrusion, the design of optimal pumping, the mitigation of seawater intrusion using freshwater injection, and estimating the hydraulic characteristics in coastal aquifer.

• Analytical Science and Technology
• /
• v.19 no.5
• /
• pp.400-406
• /
• 2006

Hydrogen analysis by elastic recoil detection has been performed utilizing polyimide film as a reference sample of known hydrogen content assuming the soundness of ion beam current integration. However beam current integration at higher incidence angle is not reliable. Scattering yield per unit fluence by current integration which is normalized per unit path length decreases as the sample tilt angle is getting higher. Moreover because beam current integration at high tilt angle is incomplete, hydrogen evaluation is very risky by direct comparison of sequentially collected recoil spectra between reference and target sample. In this study, primary ion beam dose is determined by backscattering spectrum that is collected simultaneously with recoil spectrum instead of ion beam current integration in order to reduce uncertainty arising in the process of current integration and to enhance the reliability of quantitative analysis. Three test samples are selected $-7.6{\mu}m$ polyimide film, hydrogen implanted silicondioxide and Au deposited carbon wafer- and analyzed by two methods and compared.

• Journal of Embryo Transfer
• /
• v.25 no.1
• /
• pp.21-27
• /
• 2010

The increase in the total number of cows on farms, which breed Korean Native Cattle (KNC), is associated with many problems. In particular, the services per conception and calving interval have increased. In this study, we examined the effect of dietary supplementation with vitamin and mineral complex on the estrus rate, pregnancy rate, gestation length, and birth weight of KNC calves. Multiparous or primiparous KNC were divided into 3 groups with 40 heads per group. Experimental group 1 was administered a consisting of 35,000 IU vitamin A, 100 IU vitamin E, 200 mg $\beta$-carotene, 200 mg Zn methionine, and 1.5 mg Se. Experimental group 2 was administered a vitamin complex (100 g/day) consisting of 100 IU vitamin E and 200 mg $\beta$-carotene. In the case of multiparous KNC, the estrus detection rate in the control group was 90.0% and those in the experimental groups were 75.0% to 95.0%. However, the first-service pregnancy rate after parturition in the control group was 41.2%, which was significantly lower than that in the experimental groups (71.0% to 76.7%; p<0.05). The average duration of pregnancy in the group supplemented with the vitamin complex was days, which was similar to that in the case of the control group. The birth weight of calves from cows fed with vitamin complex was 25.3 to 27.0 kg, which was similar to that in the case of the control group (25.2 to 26.0 kg). In the case of primiparous KNC, no differences in the estrus rate, pregnancy rate, gestation length, or the birth weight of calves were noted between the groups. Thus, dietary supplementation vitamin and mineral complex have no effect on the reproductive efficiency in primiparous cows, but the pregnancy rate was observed to have increased in multiparous KNC with these supplements.

• Analytical Science and Technology
• /
• v.20 no.5
• /
• pp.419-423
• /
• 2007

Environmental low level tritium analysis was studied using liquid scintillation counter(LSC) and electrolytic enrichment method. To obtain low level blank count, various counting vials were investigated. Among them, teflon coated PE vial had a lower blank count rate (1.86 cpm) and we obtained 2.01 Bq/L detection and tritium separation factor was above 20. LSC counting efficiency obtained $28.70{\pm}0.27%$ using the NIST tritium standard water sample.

• Analytical Science and Technology
• /
• v.15 no.5
• /
• pp.475-481
• /
• 2002

The determination of phthalates and adipate in natural mineral water and its container is described. Phthalates and adipate were extracted from natural mineral water by liquid-liquid extraction with methylene chloride, concentrated and then injected in GC-MS (SIM). Phthalates and adipate from 1) PET, cap, label and glue were extracted in Soxhlet with 50 mL of carbon tetrachloride, purified with silicagel and detected with GC-MS (SIM). Peak shapes and quantitation of phthalates and adipate were excellent, with linear calibration curves over a range of $0.1{\sim}10{\mu}g/L$ in water sample ($r^2$ > 0.996) and over a range of $1{\sim}1,000{\mu}g/Kg$ in solid samples ($r^2$>0.994). The detection limits of analytes were $0.002{\sim}0.010{\mu}g/L$ in water and $0.01{\sim}0.02{\mu}g/Kg$ in solid samples. Five kinds of natural mineral water samples, two PETs, two labels, two caps and two glues were quantified by the described procedure. As a results, the concentrations of total phthalates in natural mineral water ranged from ND ~ 1.2 ng/mL. Otherwise, the concentrations of total phthalate extracted from PET ranged from 0.55 ~ 1.2 mg/Kg. We found that the accurate determination of phthalte and adipate in natural mineral water and container must be considered blank correction and the removal of label and glue in PET sample.

• Geophysics and Geophysical Exploration
• /
• v.22 no.3
• /
• pp.132-148
• /
• 2019

Recently, safety and environmental concerns have become major social issues. Especially, a special underground-safety law has been made and enacted to prevent ground subsidence around construction sites. For environmental problems, several researches have started or will start on characterization of contaminated sites, in-situ environmental remediation in subsurface, and monitoring of remediation results. As a part of the researches, geophysical surveys, which have been mainly applied to explore mineral resources, geological features or ground, are used to characterize not only contaminated areas but also fluid flow paths in subsurface environments. As a basic study for the application of geophysical surveys to detect contamination in subsurface, this paper analyzes previous researches to understand changes in geophysical properties of contaminated zones by various contaminants such as leachate, heavy metals, and non-adequate phase liquid (NAPL). Furthermore, this paper briefly introduces how geophysical surveys like direct-current electrical resistivity, induced polarization and ground penetration radar surveys can be applied to detect each contamination, before analyzing case studies of the applications in contaminated areas by NAPL, leachate, heavy metal or nitrogen oxides.