• Computers and Concrete
• /
• 제8권6호
• /
• pp.735-755
• /
• 2011

The capability of a multi-directional fixed smeared crack constitutive model to simulate the flexural/punching failure modes of fiber reinforced concrete (FRC) laminar structures is discussed. The constitutive model is implemented in a computer program based on the finite element method, where the FRC laminar structures were simulated according to the Reissner-Mindlin shell theory. The shell is discretized into layers for the simulation of the membrane, bending and out-of-plane shear nonlinear behavior. A stress-strain softening diagram is proposed to reproduce, after crack initiation, the evolution of the normal crack component. The in-plane shear crack component is obtained using the concept of shear retention factor, defined by a crack-strain dependent law. To capture the punching failure mode, a softening diagram is proposed to simulate the decrease of the out-of-plane shear stress components with the increase of the corresponding shear strain components, after crack initiation. With this relatively simple approach, accurate predictions of the behavior of FRC structures failing in bending and in shear can be obtained. To assess the predictive performance of the model, a punching experimental test of a module of a façade panel fabricated with steel fiber reinforced self-compacting concrete is numerically simulated. The influence of some parameters defining the softening diagrams is discussed.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제8권2호
• /
• pp.117-126
• /
• 2016

In this paper, a numerical procedure for the natural vibration analysis of plates with openings and carlings based on the assumed mode method is extended to assess their forced response. Firstly, natural response of plates with openings and carlings is calculated from the eigenvalue equation derived by using Lagrange's equation of motion. Secondly, the mode superposition method is applied to determine frequency response. Mindlin theory is adopted for plate modelling and the effect of openings is taken into account by subtracting their potential and kinetic energies from the corresponding plate energies. Natural and frequency response of plates with openings and carlings subjected to point excitation force and enforced acceleration at boundaries, respectively, is analysed by using developed in-house code. For the validation of the developed method and the code, extensive numerical results, related to plates with different opening shape, carlings and boundary conditions, are compared with numerical data from the relevant literature and with finite element solutions obtained by general finite element tool.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.129-136
• /
• 2004

Anisotropic characteristics of deformation are important to understand the particular behavior in the pre-failure state of soils. Recent experiments shows that cross-anisotropic moduli of granular soils can be expressed by functions of normal stresses in the corresponding directions, which is closely linked to micromechanical characteristics of particles. Granular soils are composed of a number of particles so that the force-displacement relationship at each contact point governs the macroscopic stress-strain relationship. Therefore, the micromechanical approach in which the deformation of granular soils is regarded as a mutual interaction between particle contacts is one of the best ways to investigate the anisotropic deformation of soils. In this study, a numerical program based on the theory of micromechanics is developed. Modified Hertz-Mindlin model is adopted to represent the force-displacement relationship in each contact point for the realistic prediction of anisotropic moduli. To evaluate the model parameters, a set of analytical solutions of anisotropic moduli is derived in the isotropic stress condition. By comparing the analytical solutions with exact values, we confirm that the analytical solutions can be utilized to evaluate model parameters within the acceptable range of error of 10%.

• 한국농공학회논문집
• /
• 제49권4호
• /
• pp.43-49
• /
• 2007

The reinforced concrete slab is one of main structure members in the construction industry sector. However, most of researches regarding to RC slabs have been focused on two-dimensional Mindlin-type plate element on the basis of laminated plate theory since three-dimensional solid element has a lot of difficulties in finite element formulation and costs in CPU time. In reality, the RC slabs are subjected to dynamic loads like a heavy traffic vehicle load, and thus should insure the safety from the static load as well as dynamic load. Once we can estimate the dynamic behaviour of RC slabs exactly, it will be very helpful for design of it. In this study, the 20-node solid element has been used to analyze the dynamic characteristics of RC slabs with clamped edges. The elasto-visco plastic model for material non-linearity and the smeared crack model have been adopted in the finite element formulation. The applicability of the proposed finite element has been tested for dynamic behaviour of RC slabs with respect to characteristics of concrete materials in terms of cracking stress, crushing strain, fracture energy and Poisson's ratio. The effect on dynamic behaviour is dependent on not crushing strain but cracking stress, fracture energy and Poisson's ratio. In addition to this, it is shown the damping phenomenon of RC slabs has been identified from the numerical results by using Rayleigh damping.

• Steel and Composite Structures
• /
• 제19권3호
• /
• pp.713-733
• /
• 2015

In this paper, viscous fluid induced nonlinear free vibration and instability analysis of a functionally graded carbon nanotube-reinforced composite (CNTRC) cylindrical shell integrated with two uniformly distributed piezoelectric layers on the top and bottom surfaces of the cylindrical shell are presented. Single-walled carbon nanotubes (SWCNTs) are selected as reinforcement and effective material properties of FG-CNTRC cylindrical shell are assumed to be graded through the thickness direction and are estimated through the rule of mixture. The elastic foundation is modeled by temperature-dependent orthotropic Pasternak medium. Considering coupling of mechanical and electrical fields, Mindlin shell theory and Hamilton's principle, the motion equations are derived. Nonlinear frequency and critical fluid velocity of sandwich structure are calculated based on differential quadrature method (DQM). The effects of different parameters such as distribution type of SWCNTs, volume fractions of SWCNTs, elastic medium and temperature gradient are discussed on the vibration and instability behavior of the sandwich structure. Results indicate that considering elastic foundation increases frequency and critical fluid velocity of system.

• Steel and Composite Structures
• /
• 제37권2호
• /
• pp.253-258
• /
• 2020

Vibration response in a sandwich plate with a nanocompiste core covered by magnetic layer is presented. The core is armed by functionalyy graded-carbon nanotubes (FG-CNTs) where the Mori-Tanaka law is utilized assuming agglomeration effects. The structure plate is located on elastic medium simulated by Pasternak model. The governing equations are derived based on Mindlin theory and Hamilton's principle. Utilizing diffrential quadrature method (DQM), the frequency of the structure is calculated and the effects of magnetic layer, volume percent and agglomeration of CNTs, elastic medium and geometrical parameters of structure are shown on the frequency of system. Results indicate that with considering magnetic layer, the frequency of structure is increased.

• Computers and Concrete
• /
• 제20권6호
• /
• pp.671-682
• /
• 2017

In this research, seismic response of pipes is examined by applying nanotechnology and piezoelectric materials. For this purpose, a pipe is considered which is reinforced by carbon nanotubes (CNTs) and covered with a piezoelectric layer. The structure is subjected to the dynamic loads caused by earthquake and the governing equations of the system are derived using mathematical model via cylindrical shell element and Mindlin theory. Navier-Stokes equation is employed to calculate the force due to the fluid in the pipe. Mori-Tanaka approach is used to estimate the equivalent material properties of the nanocomposite and to consider the effect of the CNTs agglomeration on the scismic response of the structure. Moreover, the dynamic displacement of the structure is extracted using harmonic differential quadrature method (HDQM) and Newmark method. The main goal of this research is the analysis of the seismic response using piezoelectric layer and nanotechnology. The results indicate that reinforcing the pipeline by CNTs leads to a reduction in the displacement of the structure during an earthquake. Also the negative voltage applied to the piezoelectric layer reduces the dynamic displacement.

• 한국전산구조공학회논문집
• /
• 제27권2호
• /
• pp.63-70
• /
• 2014

본 논문에서는 압전 수정진동자의 설계민감도 해석 및 위상 최적설계 기법을 개발하였다. 압전 수정진동자는 가해지는 전하에 의해 두께방향 전단 변형하게 되거나, 혹은 그 반대방향으로 기계 변형에 의해 전기적 신호를 검출하게 된다. 엄밀한 두께방향 전단해석을 위해 두께방향으로 고차 보간을 하는 고차 민들린(Mindlin) 판 이론을 도입하였다. 압전 수정진동자에서 수정판은 부도체이기 때문에 전기적 신호를 검출하거나 전기적 신호에 의해 수정판을 기계적으로 진동시키기 위해 수정판의 상/하 표면에 얇은 전극경을 도포한다. 비록 전극경이 매우 얇기는 하지만 그 무게와 형상에 따라 진동자의 거동이 달라지기 때문에, 설계민감도 해석 및 위상 최적설계를 위한 설계변수는 전극경의 질량 밀도와 관계된다. 따라서 위상 최적설계 문제는 두께방향 전단 변형에너지를 최대화하는 최적의 전극경 분포를 구하도록 구성한다. 또한 보다 의미있는 설계안을 얻기 위해 전극경의 재료량과 면적에 제약조건을 부여한다. 두께방향 전단 주파수(고유치)와 상응하는 모드형상(고유벡터)에 대한 설계구배는 고유벡터 확장법을 이용한 해석적 설계민감도 해석법을 통해 매우 효율적이고 정확하게 계산될 수 있다. 수치예제를 통해 제안된 해석적 설계민감도가 유한차분 설계민감도와 비교하여 매우 효율적이고 정확하게 계산됨을 확인하였다. 또한 위상 최적설계를 통해 도출된 최적 전극경 설계가 모드형상과 두께방향 전단 변형에너지를 개선시킴을 확인하였다.

• 대한토목학회논문집
• /
• 제37권1호
• /
• pp.83-91
• /
• 2017

말뚝지지 전면기초에서 침하량을 산정할 경우 기초판-말뚝-지반간 상호작용을 고려해야 하며, 단순 해석법으로는 이러한 복잡한 상호작용을 고려하여 해석하는 것이 어렵다. 본 연구에서는 말뚝지지 전면기초의 침하량 해석을 위해 기초판-말뚝-지반간 상호작용을 고려한 근사해석법(HDPR)을 개발하였다. 기초판은 Mindlin 판이론을 이용하여 유한요소로 모델링 하였고, 지반 및 말뚝은 기초판에 연결된 스프링으로 모델링되었다. 지반 스프링의 경우 다층지반을 고려한 선형 스프링을 적용하였고, 말뚝은 비선형 스프링을 적용하였으며, 각각의 스프링은 기초판-말뚝-지반간 상호작용이 반영되었다. 본 연구에서의 해석기법 검증을 위해 3차원 유한요소해석, 기존에 개발된 근사해석방법 및 실제 현장 계측결과와 비교분석을 수행하였다. 그 결과, 개발된 기법이 말뚝 및 기초판의 침하량을 합리적으로 예측하는 것으로 나타났다. 이를 통해 실제 말뚝지지 전면기초 해석 및 설계 시 실용적인 측면에서 적용이 가능함을 확인할 수 있었다.

• 대한토목학회논문집
• /
• 제13권5호
• /
• pp.99-107
• /
• 1993

본 논문에서는 콘크리트 균열 사이의 인장강성 효과를 고려한 임의의 기하하적 형상을 갖는 철근 콘크리트 쉘을 해석하기 위하여 재료비선형 유한요소 프로그램을 작성하였다. 본 논문은 연속적인 컴퓨터 해석으로 탄성, 비탄성 및 극한 범위에서의 철근과 콘크리트의 응력은 물론, 하중-변위 응답과 균열전파를 추적할 수 있었다. 골재억물림과 철근의 다울작용을 포함하는 유효전단계수를 평가하기 위하여 균열상태의 전단유지계수를 도입하였다. 콘크리트는 인장에서는 취성으로 압축에서는 탄소성으로 가정하였다. 콘크리트의 소성거동은 Drucker-Prager 항복기준과 결합유동법칙에 따르는 것으로 가정하였다. 철근은 Von Mises 항복기준으로 가정하였으며 등가의 두께를 가지는 철근층으로 모델화 하였다. 수치해석을 위하여는 증분형접선강성도 방법을 사용하였다. 수치예제를 제시하여 본 연구결과를 Hedgren의 실험 결과와 Lin의 수치해석과 비교하였다.