• 생명과학회지
• /
• 제24권12호
• /
• pp.1325-1329
• /
• 2014

건강 기능성 한방 재료로 알려져 있는 구기자를 식품 재료로 이용하기 위해서는 건조 구기자가 오래되면 생성되는 이취 성분이 문제가 된다. 구기자중 저장 기간이 짧은 것(시료1)과 저장 기간이 오래 된 것(시료2)에 대해 휘발성 성분을 비교 분석하여 이취를 찾고 추후 이취를 제거하는 방법을 모색하기 위해 연구를 시행하였다. 각 구기자 시료에 대해서 동시증류추출장치(SDE)를 사용하여 휘발성 성분을 추출하고 GC-MS로 분석, 동정하였다. 시료1의 휘발성성분으로 aldehyde류 17종, alcohol류 8종, terpene류 6종, ester류 4종, ketone류 3종 및 furan류 3종, pyrazine류 3종 및 기타 2종을 포함한 총 45종의 향기성분을 동정하였다. 시료2의 휘발성성분으로 aldehyde류 12종, alcohol류 3종, terpene류 5종, ester류 2종, ketone류 4종, furan류 3종, pyrazine류 3종, 산인 isovaleric acid 1종 및 기타 2종을 포함한 총 34종의 향기성분을 동정하였다. 두 시료 중에서 휘발성 성분의 차이가 있었다. 이러한 휘발성 성분의 차이와 함량의 변화는 구기자의 저장 기간이 길어지면 좋지 않은 냄새에 영향을 미친다고 생각되지만 저장 기간이 짧은 구기자에는 없고 저장기간이 오래 된 구기자에만 동정된 역치가 매우 낮은 isovaleric acid은 구기자 제품의 저장성이 경과할 때 영향을 줄 것으로 생각되었다.

• Journal of Chest Surgery
• /
• 제15권2호
• /
• pp.222-229
• /
• 1982

The aneurysmal dilatation of ascending aorta with the aortic regurgitation presents typical surgical problems. Over the years, various surgical procedures had been used for the management of the dilated segment of sending aorta and the aortic regurgitation. The surgical technique Is still in the state of evolution. The one method is the super coronary replacement of the ascending aorta with vascular graft and replacement of the aortic valve with preservation of the coronary ostia as advocated by Miller and his colleague at Stanford University, so called conventional technique". The other is the replacement of aortic valve and the dilated segment of the ascending aorta using a composite graft and transplantation of the coronary ostia as described by Bentall and DeBono in 1968. The controversy appears to evolve around 3 technical problems. One is bleeding from the grafted area. Two is later development of the aneurysmal dilatation of the subcoronary aortic wall when non-composite graft is employed. Three is a management of the coronary arteries. The purpose of this article is to present our experience with 7 cases of annuloaortic ectasia in whom both of these surgical techniques at that employed and to review some of the problems that encountered during the management of these patients .

• Computers and Concrete
• /
• 제10권6호
• /
• pp.609-630
• /
• 2012

Currently, the design of reinforced concrete deep beams with web openings is carried out using empirical or semi-empirical methods and hence their scope of application is limited. In particular, high strength concrete deep beams with various web opening configurations have been given little treatment. In view of this, a nonlinear layered finite element method (LFEM) for cracking and failure analysis of reinforced concrete structures is used to conduct a parametric study to investigate reinforced concrete deep beams various web opening behaviours. This paper initially presents comparisons of LFEM output with published test results to numerical techniques. The paper then focuses on a parametric study on the shear strengths of deep beams with varying web opening configurations such as opening sizes and locations. The results confirm that the current design methods are inadequate in predicting the maximum shear strength when web openings are present. A series of parametric study offers insight into the maximum shear strength of the deep beams being critically influenced by the size and location of web openings.

• 대한기계학회논문집A
• /
• 제33권4호
• /
• pp.366-372
• /
• 2009

Creep life prediction has been commonly used by a time-temperature parameter (TTP) which is correlated to an applied stress and temperature, such as Larson-Miller (LM), Orr-Sherby-Dorn (OSD), Manson-Haferd (MH) and Manson-Succop (MS) parameters. A stress-temperature linear model (STLM) based on Arrhenius, Dorn and Monkman-Grant equations was newly proposed through a mathematical procedure. For this model, the logarithm time to rupture was linearly dependent on both an applied stress and temperature. The model parameters were properly determined by using a technique of maximum likelihood estimation of a statistical method, and this model was applied to the creep data of Alloy 617. From the results, it is found that the STLM results showed better agreement than the Eno’s model and the LM parameter ones. Especially, the STLM revealed a good estimation in predicting the long-term creep life of Alloy 617.

• 성인간호학회지
• /
• 제13권4호
• /
• pp.601-609
• /
• 2001

Purpose: The purpose of this study was to identify the degree of perceived powerlessness in hospitalized elderly patients of the medical and surgical unit. Method: The instrument for this study was the Powerlessness Behavioral Assessment Tool(Miller, 1983). The reliability of the instruments was .85. The data was analyzed by descriptive statistics, t-test, and ANOVA. Results: The results were as follows ; 1. The mean score of powerlessness was $35.02(SD={\pm}9.24)$ in a range of 19 to 64, and the mean of powerlessness was total 1.84. Among 4 subscales, the highest score was in the area of verbal response (M=1.98), and the lowest score for powerlessness was in the area of daily activities(M=1.74). In all items, 'verbal expression of fatalism' showed the highest score(M=2.78), and 'verbal expressions of giving up' showed the lowest score(M=1.38). 2. There were significant differences in the level of powerlessness according to hospitalization experience(t=-3.03, p=0.006), medical treatment experience(t=.291, p=.004). Especially, there was significant difference according to the hospitalization experience of the hospital in all sub- scales. Conclusion: Based on these conclusions, nursing education for patient's diseases and treatment can be used for proper nursing intervention in reducing the level of powerlessness of hospitalized elderly.

• 한국정밀공학회지
• /
• 제27권3호
• /
• pp.127-134
• /
• 2010

Components in thermal power plants are subjected to service conditions under which creep damages take place causing material exhaustion. Comprehensive creep damage investigations have been performed on a 0.5Cr0.5Mo0.25V pipe bend which had been taken out of service after 117,603h and 501 start-ups because of severe cracks. The propagation of creep damage in a long term exposed pipe bend has been analysed by the replication, Indentation and hardness tests. Also, Calculation of creep lifetime has been investigated in order to verify actual lifetime of a damaged pipe bend. By measuring diametrical expansion, Accumulated creep strain and creep strain rate were calculated. Calculated results of creep lifetime on the Larson-Miller Parameter method are good agreement with actual service-exposed hour.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.701-710
• /
• 1996

Composting has gained rapid acceptance as a method of recyling relatively dry organic materials such as leaves and brush and , when alternative disposal costs are high, even moist materials such as grass clippings and dewatered sewage sludges. However, as moisture contents rise above 60% , the need for a dry bulking amendment increase the costs of composting , both by direct purchases of amendment and though increased reactor capacity and materials handling requirements. High moisture materials also present increased risks of anaerobic odor formation through reduced oxygen transport (Miller , 1991) . These costs and operational challengers often constrain the opportunities to compost high moisture materials such as agricultural manures. During the last several decades economies of scale in livestock production have been increasing livestock densities and creating manure management challenges throughout the world. This issue is particularly pressing in Korea, where livestock arms typically manage little or no cropland, and the nutrients and boichemical oxygen demand in manure pose a serious threat to water quality. Composting has recently become popular as a means of recycling manure into products for sale off the farm, but bulking amendments (usually sawdust) are expensive designed to minimize bulking agent requirements by using the energy liberated by decompostion. In this context the composting reactor is used as a biological dryer, allowing the repeated use of bulking amendment with several batches of manure.

• 한국전자파학회논문지
• /
• 제9권3호
• /
• pp.289-295
• /
• 1998

본 연구에서는 레일레이 페이딩 채널하에서 16-QAM통신 방식의 BER를 개선시키는 방안을 제안한다. 이동 무선 환경에서 페이딩에 의한 BER 열화를 극복하기위하여 밀러코딩 기법을 적용하였으며 이것은 동일한 코딩 이득에 대해 맨체스터 코딩기법에서 필요한 대역폭의 절반으로 가능하므로 효과적일뿐 아니라 $180^{\circ}$ 위상모호성 등에 덜 민감하므로 PSK 계열의 통선방식에 보다 효과적이다. 제안된 시스템을 컴퓨터상에서 시융레이션한 결 과 밴체스터 코딩기법에 비해 $10^{-4}$에서 약 3.8 dB 정도 개선시키는 효과를 보았다.

• Steel and Composite Structures
• /
• 제32권6호
• /
• pp.701-715
• /
• 2019

Using first-order shear deformation theory (FSDT), a semi-analytical solution is employed to analyze creep damage and remaining life assessment of 304L austenitic stainless steel thick (304L ASS) cylindrical pressure vessels with variable thickness subjected to the temperature gradient and internal non-uniform pressure. Damages are obtained in thick cylinder using Robinson's linear life fraction damage rule, and time to rupture and remaining life assessment is determined by Larson-Miller Parameter (LMP). The thermo-elastic creep response of the material is described by Norton's law. The novelty of the present work is that it seeks to investigate creep damage and life assessment of the vessels with variable thickness made of 304L ASS using LMP based on first-order shear deformation theory. A numerical solution using finite element method (FEM) is also presented and good agreement is found. It is shown that temperature gradient and non-uniform pressure have significant influences on the creep damages and remaining life of the vessel.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권1호
• /
• pp.813-821
• /
• 2021

The relationship between capital structure policy and firm value is interesting to study because the concept of capital structure was initiated by Modigliani and Miller who claimed that the company's capital structure is not a factor in its value. They asserted that linking leverage with firm value was irrelevant. Therefore, this study examined the role of growth opportunities as a moderating variable for the relationship between capital structure and firm value. The population of this study is 300 companies from the manufacturing sector that are listed on the Indonesia Stock Exchange (IDX) for the period 2015-2018. To analyze the data, the subgroup moderation method was employed by dividing the data into two parts: companies with high growth opportunities and companies with low growth opportunities. The results revealed that capital structure had a direct positive effect on firm value. Furthermore, the test results of the two regression models of growth opportunities as the moderating variable are very interesting. It was found that for companies with high growth opportunities, the use of debt had a negative effect on firm value, and conversely, the use of debt had a positive effect on firm value for companies with low growth opportunities. The statistical F-test results proved that growth opportunities are a moderating variable for the relationship between capital structure and firm value.