• Title/Summary/Keyword: Miller index

Search Result 24, Processing Time 0.024 seconds

Structural and Optical Characteristics of ZnS:Mn Thin Film Prepared by EBE Method (전자빔 증착법으로 제작된 ZnS:Mn 박막의 구조 및 광학적 특성)

  • 정해덕;박계춘;이기식
    • Electrical & Electronic Materials
    • /
    • v.10 no.10
    • /
    • pp.1005-1010
    • /
    • 1997
  • ZnS:Mn thin film was made by coevaporation with Electron Beam Evaparation(EBE) method. And structural and optical characteristics of ZnS:Mn thin films were investigated by substrate temperature annealing temperature and dopant Mn. When ZnS:Mn thin film was well deposited with cubic crystalline at substrate temperature of 30$0^{\circ}C$ its surface index was [111] and its lattice constant of a was 5.41$\AA$. Also When ZnA:Mn thin film was well made with hexagonal crystalline at substrate temperature of 30$0^{\circ}C$annealing temperature of 50$0^{\circ}C$and annealing time of 60min its miller indices were (0002) (1011), (1012) and (1120). And its lattice constant of a and c was 3.88$\AA$and 12.41$\AA$ respectively. Finally hexagonal ZnS:Mn thin film with dopant Mn of 0.5wt% had fundamental absorption wavelength of 342nm. And so its energy bandgap was about 3.62eV.

  • PDF

A Proposal for Enhanced Miller Algorithm Secure Against Counter Fault Attack (카운터 오류 공격에 안전한 Miller 알고리듬)

  • Bae, Kiseok;Park, Youngho
    • Journal of the Institute of Electronics and Information Engineers
    • /
    • v.50 no.7
    • /
    • pp.68-75
    • /
    • 2013
  • Recently, there has been introduced various types of pairing computations to implement ID based cryptosystem for mobile ad hoc network. According to spreading the applications of pairing computations, various fault attacks have been proposed. Among them, a counter fault attack has been considered the strongest threat. Thus this paper proposes a new countermeasure to prevent the counter fault attack on Miller's algorithm. The proposed method is able to reduce the possibility of fault propagation by a random index of intermediate values. Additionally, it is difficult to challenge fault attacks on the proposed method since a simple side channel leakage of 'if' branch is eliminated.

Degradation Quantification Method and Degradation and Creep Life Prediction Method for Nickel-Based Superalloys Based on Bayesian Inference (베이지안 추론 기반 니켈기 초합금의 열화도 정량화 방법과 열화도 및 크리프 수명 예측의 방법)

  • Junsang, Yu;Hayoung, Oh
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.27 no.1
    • /
    • pp.15-26
    • /
    • 2023
  • The purpose of this study is to determine the artificial intelligence-based degradation index from the image of the cross-section of the microstructure taken with a scanning electron microscope of the specimen obtained by the creep test of DA-5161 SX, a nickel-based superalloy used as a material for high-temperature parts. It proposes a new method of quantification and proposes a model that predicts degradation based on Bayesian inference without destroying components of high-temperature parts of operating equipment and a creep life prediction model that predicts Larson-Miller Parameter (LMP). It is proposed that the new degradation indexing method that infers a consistent representative value from a small amount of images based on the geometrical characteristics of the gamma prime phase, a nickel-base superalloy microstructure, and the prediction method of degradation index and LMP with information on the environmental conditions of the material without destroying high-temperature parts.

Representation Theory of the Lie Group T3 and Three Index Bessel Functions

  • Pathan, Mahmood Ahmad;Shahwan, Mohannad Jamal Said
    • Kyungpook Mathematical Journal
    • /
    • v.53 no.1
    • /
    • pp.143-148
    • /
    • 2013
  • The theory of generalized Bessel functions is reformulated within the framework of an operational formalism using the multiplier representation of the Lie group $T_3$ as suggested by Miller. This point of view provides more efficient tools which allow the derivation of generating functions of generalized Bessel functions. A few special cases of interest are also discussed.

A Study on the Mechanical Properties of the Cretaceous Tuffs in Goheung Area. (고흥지역에 분포하는 백악기 응회암의 역학적 특성에 관한 연구)

  • Kim Hai-Gyoung;Koh Yeong-Koo;Oh Kang-Ho
    • The Journal of Engineering Geology
    • /
    • v.14 no.3 s.40
    • /
    • pp.273-285
    • /
    • 2004
  • The mechanical properties of the Cretaceous tuff distributed in the Goheung area were measured in the laboratory. Tuff (Goehung tuff and Palyeongsan welded tuff) in the study area is classified into vitric tuff with regard to its composition. The specific gravity, the dry density, the water content, the porosity and absorption ratio in tuffs of the study area are 2.51, $2.52(g/cm^2)$, 0.12($\%$), 4.51($\%$) and 1.91($\%$) in means, respectively. In the tuffs, dry densities are in inverse Proportion to Porosities, and absorption ratios are highly proportional with Porosities. The uniaxial compressive strengths(UCS) in the tuffs ranges from 80.4 to 208(MPa) and the average of the strength is 141.1(MPa). According to the engineering classification of intact rock (Deere & Miller, 1966), the tuffs are assigned to the high strength rocks. The point load strength index ($Is_a$) in axial test is 4.2(MPa) on the average, and the point load strength index ($Is_d$) in diametral test is 2.2(MPa) in mean, and the point load strength anisotrophic index($Ia_{(50)}$) by the ratio of $Is_a$ to $Is_d$ is 1.93. There is close linear correlation between the uniaxial compressive strength and point load strength index, and the equation representing the correlation is postulated as follows : UCS = 22 $Is_{(50)}$ +49 (MPa) (r=0.95). It is considered that this equation is a useful tool to estimate UCS for tuff in Goheung area.

ASSESSMENT OF PUBLIC PERCEIVED ROADWAY SMOOTHNESS

  • Jamie Miller;Don Chen;Neil Mastin
    • International conference on construction engineering and project management
    • /
    • 2013.01a
    • /
    • pp.507-508
    • /
    • 2013
  • International Roughness Index (IRI) has been widely used by state DOTs to quantify pavement smoothness. When pavement condition falls below certain IRI thresholds, corresponding pavement maintenance treatments should be considered for application. Selection of appropriate IRI thresholds is essential to tactical allocation of limited resources to improve the conditions of states' roadway systems. This selection process is often challenging, however, because IRI thresholds are largely determined by Perceived Ride Quality (PRQ), and PRQ differs in each state. In this paper, a framework is proposed to address this problem. Passenger raters will be randomly selected from predetermined geographic locations, and their PRQ ratings collected. Taking this perceived ride data, along with other data collected, a statistical analysis will be conducted to establish the relationship between measured IRI values and PRQ. Appropriate IRI thresholds will then be determined. Once this framework is implemented, state DOTs could make informative maintenance decisions, which are expected to greatly enhance the public perception of pavement conditions in today's challenging economy.

  • PDF

Creep Behaviours of 9% Ni Alloy (Ni 합금강의 크리프 거동)

  • Hwang, Kyung-Choong;Kim, Jong-Bae;Kang, Sung Soo
    • Journal of Korean Ophthalmic Optics Society
    • /
    • v.13 no.4
    • /
    • pp.89-94
    • /
    • 2008
  • Purpose: To observe the high temperature creep test and the fracture surface of the samples of 9% Ni alloy steel generally used for all kinds of mahine parts and predict the durability of that by determining a constant of C with a Larson-Miller variable. Methods: The equipment of this test was made into lever-beam style designed by Andrade and F. Garofalo et al.. The condition of creep test was set under 16 kinds of conditions after fixing 4 kinds of temperature condition and 4 kinds of stress condition to check how it effects the samples. Results: The temperature of creep test was increased, the stress index (n) of creep deformation was gradually decreased from 3.97 to 3.55. The activation energy of creep deformation was decreased from 90.39 to 83.64 kcal/mol when the stress was increased. A constant of C value by calculation of larson-Miller variable was about 22 and if temperature for use is suggested, the durability could be calculated. Conclusions: By analyzing the fracture phenomenon and suggesting the observation result of the fracture surface of the samples and creep test of 9% Ni alloy steel, the basic design data for the practical use of accessories in the field of equipment could be constructed and used to predict the durability of the equipment.

  • PDF

Comparison of Multiple Chronic Obstructive Pulmonary Disease (COPD) Indices in Chinese COPD Patients

  • Zhang, Jinsong;Miller, Anastasia;Li, Yongxia;Lan, Qinqin;Zhang, Ning;Chai, Yanling;Hai, Bing
    • Tuberculosis and Respiratory Diseases
    • /
    • v.81 no.2
    • /
    • pp.116-122
    • /
    • 2018
  • Background: Chronic obstructive pulmonary disease (COPD) is a serious chronic condition with a global impact. Symptoms of COPD include progressive dyspnea, breathlessness, cough, and sputum production, which have a considerable impact on the lives of patients. In addition to the human cost of living with COPD and the resulting death, COPD entails a huge economic burden on the Chinese population, with patients spending up to one-third of the average family income on COPD management in some regions is clinically beneficial to adopt preventable measures via prudent COPD care utilization, monetary costs, and hospitalizations. Methods: Toward this end, this study compared the relative effectiveness of six indices in predicting patient healthcare utilization, cost of care, and patient health outcome. The six assessment systems evaluated included the three multidimensional Body mass index, Obstruction, Dyspnea, Exercise capacity index, Dyspnea, Obstruction, Smoking, Exacerbation (DOSE) index, and COPD Assessment Test index, or the unidimensional measures that best predict the future of patient healthcare utilization, cost of care, and patient health outcome among Chinese COPD patients. Results: Multiple linear regression models were created for each healthcare utilization, cost, and outcome including a single COPD index and the same group of demographic variables for each of the outcomes. Conclusion: We conclude that the DOSE index facilitates the prediction of patient healthcare utilization, disease expenditure, and negative clinical outcomes. Our study indicates that the DOSE index has a potential role beyond clinical predictions.