• The Korean Journal of Air & Space Law and Policy
• /
• v.20 no.1
• /
• pp.211-253
• /
• 2005

Recently, the Korean Supreme Court released two important decisions concerning damages for the pain and suffering from Aircraft noise. The local people who are living near the Air Force practice site at Maehyang-ri and the Kimpo International Airport brought lawsuits against the Korean government requesting damages for their financial loss from the severe noise and the damages for their pain and suffering. Plaintiffs alleged that they suffered physical malfunctions, extreme disturbances and the reduction of property values from the extreme noises which were daily repeated. District Court of Seoul Province did not allow plaintiffs all but the damages for pain and suffering. Plaintiffs could not prove the causation between their financial loss and the noise. The Supreme Court confirmed the lower court's decision. Article V of the National Compensation Act (analogous to the Federal Tort Claims Act of the USA) reads, "the government shall be liable for any loss caused by the defect on establishment or maintenance of public facilities." In the two cases, the major issue was whether the government's establishment or maintenance of Air Force practice site and the airport was defective because they caused serious noise to surrounding neighbors. Previously, the Supreme Court interpreted the clause "defect on establishment or maintenance of public facilities" as failure of duty to provide safety measures to the degree generally required to ordinary manager. However the Court at this time interpreted differently that the defect could be found if the facility caused to any person loss to the degree intolerable. In the two cases the Court confirmed the lower court's finding that noise level at the site was severe enough to be intolerable. This standard is based on the severity of the loss rather than the failure of duty. It became easier for plaintiffs to prove the cause of action under this interpretation. The consequence of the ruling of these two cases is 'rush to the courtroom' by the local people at similar situations. The ruling of these two cases was not appropriate both in theory and in consequence. The Korean tort system is basically based on the theory of negligence. Strict liability is exceptional only when there is special legislation. The Court created strict liability rule by interpreting the Art. V of the National Compensation Act. This is against the proper role of the court. The result of the cases is also dismal. The government was already sued by a number of local people for damages. Especially the Department of Defense which is operating many airports nationwide has financial hardship, which will cause downsizing military practice by the Air Force in the long run, This is no good to anyone. Tens of millions of dollars which might be used for compensation might be better used to prevent further noise problem surrounding airports.

• International Journal of Ocean System Engineering
• /
• v.2 no.3
• /
• pp.185-194
• /
• 2012

A Macroscopic combination of two or more distinct materials is commonly referred to as a "Composite Material", having been designed mechanically and chemically superior in function and characteristic than its individual constituent materials. Composite materials are used not only for aerospace and military, but also heavily used in boat/ship building and general composite industries which we are seeing increasingly more. Regardless of the various applications for composite materials, the industry is still limited and requires better fabrication technology and methodology in order to expand and grow. An example of this is that the majority of fabrication facilities nearby still use an antiquated wet lay-up process where fabrication still requires manual hand labor in a 3D environment impeding productivity of composite product design advancement. As an expert in the advanced composites field, I have developed fabrication skills with the use of machinery based on my past composite experience. In autumn 2011, the Korea government confirmed to fund my project. It is the development of a composite sanding machine. I began development of this semi-robotic prototype beginning in 2009. It has possibilities of replacing or augmenting the exhaustive and difficult jobs performed by human hands, such as sanding, grinding, blasting, and polishing in most often, very awkward conditions, and is also will boost productivity, improve surface quality, cut abrasive costs, eliminate vibration injuries, and protect workers from exposure to dust and airborne contamination. Ease of control and operation of the equipment in or outside of the sanding room is a key benefit to end-users. It will prove to be much more economical than normal robotics and minimize errors that commonly occur in factories. The key components and their technologies are a 360 degree rotational shoulder and a wrist that is controlled under PLC controller and joystick manual mode. Development on both of the key modules is complete and are now operational. The Korean government fund boosted my development and I expect to complete full scale development no later than 3rd quarter 2012. Even with the advantages of composite materials, there is still the need to repair or to maintain composite products with a higher level of technology. I have learned many composite repair skills on composite airframe since many composite fabrication skills including repair, requires training for non aerospace applications. The wind energy market is now requiring much larger blades in order to generate more electrical energy for wind farms. One single blade is commonly 50 meters or longer now. When a wind blade becomes damaged from external forces, on-site repair is required on the columns even under strong wind and freezing temperature conditions. In order to correctly obtain polymerization, the repair must be performed on the damaged area within a very limited time. The use of pre-impregnated glass fabric and heating silicone pad and a hot bonder acting precise heating control are surely required.

• Korean Security Journal
• /
• no.22
• /
• pp.91-111
• /
• 2010

Around the middle of the ninth century the strict bone-rank system of Silla frustrated many people who had political ambition but lacked nobility. They had to seek other ways, including maritime trade. Such an undertaking reflected and also increased their economic and military power. Trade prospered with T'ang China and with Japan as well. The threat of piracy to Silla's thriving maritime trade caused to create a succession of garrisons at important coastal points. Chonghae Jin (Chonghae garrison) was regarded as the most important of these. It was established in 828 by Chang Pogo. Chonghae Jin was on Wando, an island just east of the southwestern tip of Korea and a key place at this time in the trade between China, Korea, and Japan. From this vantage point Chang Pogo became a merchant-prince with extensive holdings and commercial interests in China and with trade contacts with Japan. Although piracy was rampant in East Asia at that time, either the Chinese or Silla government was not able to control it due to inner political strife and lack of policing resources. Infuriated by the piracy and the government's inability to control it, Chang Pogo came back to Silla to fight against the pirates and to protect maritime trade. He persuaded the king of Silla and was permitted to control the private armed forces to sweep away the pirates. In 829 he was appointed Commissioner of Chonghae-Jin with the mission of curbing piracy in that region. Chang's forces were created to protect people from pirates, but also developed into traders among Silla Korea, T'ang China, and Japan in the 9th century. This was geographically possible because the Chonghae Garrison was situated at the midpoint of Korea, China, and Japan, and also because Chang's naval forces actually dominated the East Asia Sea while patrolling sea-lanes. Based on these advantages, Chang Pogo made a great fortune, which might be collected from a charge for protecting people from pirates and the trades with China and Japan. Chang's forces could be termed the first private security company in the Korean history, at least in terms of historical documents. Based on historical documents, the numbers of private soldiers might be estimated to exceed tens of thousands at least, since Chang's forces alone were recorded to be more than ten thousand. Because local powers and aristocratic elites were said to have thousands of armed forces respectively, the extent of private forces was assumed to be vast, although they were available only to the privileged class. In short, the domination of Chang's forces was attributable to the decline of central government and its losing control over local powers. In addition it was not possible without advanced technologies in shipbuilding and navigation.

• Journal of the Ergonomics Society of Korea
• /
• v.36 no.3
• /
• pp.183-196
• /
• 2017

Objective: The purpose of this research was to assess the agreement between job physical risk factor analysis by ergonomists using ergonomic methods and physical examinations made by occupational physicians on the presence of musculoskeletal disorders of the upper extremities. Background: Ergonomics is the systematic application of principles concerned with the design of devices and working conditions for enhancing human capabilities and optimizing working and living conditions. Proper ergonomic design is necessary to prevent injuries and physical and emotional stress. The major types of ergonomic injuries and incidents are cumulative trauma disorders (CTDs), acute strains, sprains, and system failures. Minimization of use of excessive force and awkward postures can help to prevent such injuries Method: Initial data were collected as part of a larger study by the University of Utah Ergonomics and Safety program field data collection teams and medical data collection teams from the Rocky Mountain Center for Occupational and Environmental Health (RMCOEH). Subjects included 173 male and female workers, 83 at Beehive Clothing (a clothing plant), 74 at Autoliv (a plant making air bags for vehicles), and 16 at Deseret Meat (a meat-processing plant). Posture and effort levels were analyzed using a software program developed at the University of Utah (Utah Ergonomic Analysis Tool). The Ergonomic Epicondylitis Model (EEM) was developed to assess the risk of epicondylitis from observable job physical factors. The model considers five job risk factors: (1) intensity of exertion, (2) forearm rotation, (3) wrist posture, (4) elbow compression, and (5) speed of work. Qualitative ratings of these physical factors were determined during video analysis. Personal variables were also investigated to study their relationship with epicondylitis. Logistic regression models were used to determine the association between risk factors and symptoms of epicondyle pain. Results: Results of this study indicate that gender, smoking status, and BMI do have an effect on the risk of epicondylitis but there is not a statistically significant relationship between EEM and epicondylitis. Conclusion: This research studied the relationship between an Ergonomic Epicondylitis Model (EEM) and the occurrence of epicondylitis. The model was not predictive for epicondylitis. However, it is clear that epicondylitis was associated with some individual risk factors such as smoking status, gender, and BMI. Based on the results, future research may discover risk factors that seem to increase the risk of epicondylitis. Application: Although this research used a combination of questionnaire, ergonomic job analysis, and medical job analysis to specifically verify risk factors related to epicondylitis, there are limitations. This research did not have a very large sample size because only 173 subjects were available for this study. Also, it was conducted in only 3 facilities, a plant making air bags for vehicles, a meat-processing plant, and a clothing plant in Utah. If working conditions in other kinds of facilities are considered, results may improve. Therefore, future research should perform analysis with additional subjects in different kinds of facilities. Repetition and duration of a task were not considered as risk factors in this research. These two factors could be associated with epicondylitis so it could be important to include these factors in future research. Psychosocial data and workplace conditions (e.g., low temperature) were also noted during data collection, and could be used to further study the prevalence of epicondylitis. Univariate analysis methods could be used for each variable of EEM. This research was performed using multivariate analysis. Therefore, it was difficult to recognize the different effect of each variable. Basically, the difference between univariate and multivariate analysis is that univariate analysis deals with one predictor variable at a time, whereas multivariate analysis deals with multiple predictor variables combined in a predetermined manner. The univariate analysis could show how each variable is associated with epicondyle pain. This may allow more appropriate weighting factors to be determined and therefore improve the performance of the EEM.

• Korean Security Journal
• /
• no.19
• /
• pp.105-138
• /
• 2009

This study's purpose is to present the improvement of effectiveness of security activity for international conference among Several Countries which can be held hereafter. On the basis of security activity problems originating in APEC that had been held in Busan in 2005. I made up questions three times to on the members of the police, military, fire figher and national intelligence service who had experienced in Busan APEC and recognition of possible problem and possibility of improvement on each item of questions was analyzed by Delphi Method. Also interviews with 4 security experts selected from each security agency were conducted to present improvement in each part of problem. The results obtained from the face to face interview with four experts of security-enforcement agency about the role and importance of site activity stage for international conference among several countries are as followings ; First, the system that experienced security-enforcement agents can be selected for the next national security event is needed, by data-basing the security-enforcement agents who were experienced in security event as man power management. Second, the middle-term plan for the introduction of high-tech equipment and joint inspection with relevant security agents are needed for the efficient explosive technical detection. Third, high-tech security equipment could be introduced through the international high-tech security equipment exhibition. Fourth, an anti-terrorism plan should be measured by sharing information through the cooperation with domestic and international intelligence agency. Fifth, public relations should be measured systematically by organization rather than agents' individual public relations. Sixth, political consideration to secure integrative coordination with other agency is needed for security activity, through normal cooperation with fire fighting related agency such as an electric, gas, elevator company. Seventh, a definite press guideline is needed for a convenient news coverage and safety during security event.

• Journal of the Korean Geographical Society
• /
• v.29 no.3
• /
• pp.297-317
• /
• 1994

This study demonstrates the changes in the spatial organization of Korea by the construction of Seoul-Pusan railroad. This Seoul-Pusan line, which is the most important one in Korea was constructed in 1905. The original plan of the line was selected to cross the main traditional roads to control the entire Korean peninsular and to mobilize the Korean commercial potentials. It was the line to exploit the staples and to expand the Japanese market in Korea. In accordance with the contracts between Japan and Korean government, Korean government had to supply the lands for railroad, office, and service facilities. That was one of the important reasons that Korean government had been broken down. The main findings of this study are as follows: 1. The Seoul-Pusan railroad line was constructed Japanese colonial policy which emphasized three main purposes; the first was to reorganize the economic space and to collapse the traditional Korean markets for Japanese ruling, and the second was to find out the military supply routes, and the third was to search for the transcontinental line for China and Siberia. As the results, the old Korean pedestrian routes, which were the Eastern, the mid, the westren, and the Samnam route lost their functions. 2. Japanese requested for Korean government usually ten times of wider space for the site of stations than the needed one. The land was expropriated, and constructed the new centers aparted from the original Korean towns. In this process Japanese got the most developmental and windfall profits. The newly constructed centers were for Japanese immigration and the town service facilities which would be used to control the Korean financial market. At last, they easily converted the Korean spatial economy into Japanese colonial one, which made to reinforce the sphere of Seoul-Pusan line. 3. Japanese planned the stations as the central points in Korea. So the railroad stations were located apart from the centers of towns, to avoid the Korean resistances, and to maximize their profits. The mean distance from staiton to 'the town center is about 1km while the Japanese case is 0.6km. 4. The pattern of present Korean railroads is not the 'X type'. Because the Honam line is not the trunk one. So, we could call the Korean railroad pattern as the 'Ip(Chinese character 入) type' . The operational effects of Seoul-Pusan line brought out the concentration of the national economy to this line as Japanese planned. And the polorization had occurred between this line and the other parts of Korea. For twenty years (1910-1930), the transported freights were increased about 5 times. In 1930, the total freight of Seoul-Pusan line became 2, 010, 444 metric tons. If we examine this process, the underconstructing Seoul-Pusan express electric railroad should avoid adjacent this line to reduce the regional and ecological imbalance. 5. The forms of centers on the Seoul-Pusan line were classified into six types in relation to station, town center, and built-up area; the compact (integrated) type, the elongated one, the splited (independent) one, the absorbed one, the consolidated one, and the declined one. All types of these towns might be developed in accordance with the centrality, railroad function, and the other transportational functions. 6. The Seoul-Pusan line plays the most important role among Korean railroads but the ratio of passenger and freight become lower because the effiects of other inaugurated railoads the different transportation modes such as trucks and cars would be got more merits in competition. 7. The results of cluster analyses on the cities of railroad stations showed the rudimentary urban systems in 1910 and 1930. In 1930, the cities were classified into three groups; the group of small cites, the intermediate (developing) city-group, and the special city-group. In 1930s the spatial organization and urban system of Korea were similar to the present ones. We call appreciate that these were the effects of the Seoul-Pusan line.

• The Korean Journal of Air & Space Law and Policy
• /
• v.33 no.1
• /
• pp.261-284
• /
• 2018

The current international legal system does not provide a safeguard against the militarization and the weaponization of outer space. Although the term "peaceful use of outer space" in the 1967 Outer Space Treaty(OST) appears in official government statements or in multilateral space treaties, it is still without an authoritative definition in reviewing national practices. The ambiguous ban on weapons in Article IV of the OST allows countries to loophole on the deployment of other weapons other than nuclear weapons. Meanwhile "Draft Treaty on the Prevention of the Placement of Weapon in Outer Space and of the Threat or Use of Force against Outer Space Objects(PPWT)" to Conference on Disarmament (CD) commissioned by the UN General Assembly's Special Session jointly submitted by China and Russia in 2008 and later revised in 2014, attempting to define and prohibit the proliferation of weapons in outer space and provided definitions of prohibited weapons, are opposed by the US on the grounds that currently there is no arms race in outer space. Some experts support a hard law approach in which binding laws aimed at ultimately creating integrated and binding legal instruments in all aspects of the use of outer space should be adopted to regulate the military use of space. However as a temporary measure the soft law guidelines should be developed for the non liquiet, a situation where there is no applicable law. The soft law could be used to create support for the declaration of the treaties and to create international customary law. For example, the 1963 Declaration of Legal Principles Governing the Activities of States in the Exploration and Use of Outer Space that regulates the activities of the state in the exploration and use of the universe, and the 1992 Principles Relevant to the Use of Nuclear Power Sources in Outer Space will illustrated. While substantial portions of the former was codified later in the 1967 OST, the latter which, although written in somewhat mandatory terms, have been consistently complied with by states, have arguably become part of customary international law. On November 12, 1974, the General Assembly reaffirmed that the development of international law may be reflected inter alia, by declarations and resolutions of the General Assembly which may to that extent be taken into consideration by the International Court of Justice.

• The Korean Journal of Air & Space Law and Policy
• /
• v.33 no.1
• /
• pp.227-260
• /
• 2018

Recently, as the use of drones increases, the risk of drone accidents and third-party property damage is also increasing. In Korea, due to the recent increase in drone use, accidents have been frequently reported in the media. The number of reports from citizens, and military and police calls regarding illegal or inappropriate drone use has also been increasing. Drone operators may be responsible for paying damages to third parties due to drone accidents, and are liable for paying settlements due to illegal video recording. Therefore, it is necessary to study the idea of providing drone insurance, which can mitigate the liability and risk caused by drone accidents. In the US, comprehensive housing insurance covers damages caused by recreational drones around the property. In the UK, when a drone accident occurs, the drone owner or operator bears strict liability. Also, in the UK, drone insurance joining obligation depends on the weight of the drones and their intended use. In Germany, in the event of personal or material damage, drone owner bears strict liability as long as their drone is registered as an aircraft. Germany also requires by law that all drone owners carry liability insurance. In Korea, insurance is required only for "ultra-light aircraft use businesses, airplane rental companies and leisure sports businesses," where the aircraft is "paid for according to the demand of others." Therefore, it can be difficult to file claims for third party damages caused by unmanned aerial vehicles in personal use. Foreign insurance companies are selling drone insurance that covers a variety of damages that can occur during drone accidents. Some insurance companies in Korea also have developed and sell drone insurance. However, the premiums are very high. In addition, drone insurance that addresses specific problems related to drone accidents is also lacking. In order for drone insurance to be viable, it is first necessary to reduce the insurance premiums or rates. In order to trim the excess cost of drone insurance premiums, drone flight data should be accessible to the insurance company, possibly provided by the drone pilot project. Finally, in order to facilitate claims by third parties, it is necessary to study how to establish specific policy language that addresses drone weight, location, and flight frequency.

• Journal of agricultural medicine and community health
• /
• v.28 no.1
• /
• pp.39-51
• /
• 2003

Objectives: The oriental medical care has been getting popular in community health centers because of uniqueness, changing of disease patterns, and increasing of elderly population. From 1998, oriental medical doctors has been working in several rural community health centers for their military obligations. At this point of time, it is necessary to evaluate the oriental public health doctors system. This study was performed to investigate the utilization patterns, the degree of satisfactions, needs of oriental medical care service provided by community health center in a designated Gun area. This study focused on the need for extending over Myun area of community health center's oriental medical care services. Methods: Person-to-person interview survey method through a structured questionnaire was done by a personnel at a oriental medical care service room in a Gun community health center. The major statistical method used for the analysis were the t-test, ANOVA, and logistic analysis. Results: The total number of responded subjects in this study was 163 residents. Among these 65.0% were aged 61 or over, and only 13.5% recognized themselves were healthy. 73.7% of the respondents demanded establishment of more oriental medical care services provided by community health center to other Myun area. Factors affecting the need for enlargement of oriental medical care service room were education level, subjective awareness of access to community health center, and cost satisfaction of oriental medical service provided by community health center. Thus, a resident who had graduation of middle school achievement or above(OR=3.35), had a long way to center(OR=2.47), satisfied with oriental medical service cost(OR=2.78) had demonstrated increased chance of need by logistic regression analysis.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.28 no.3
• /
• pp.29-38
• /
• 2010

A moat is a pond or waterway paved on the outside of a fortress that is one of the facilities to prevent enemy from approaching the fortress wall or classify it as the boundary space, and this study was undertaken to find out the characteristics of the moat that was existed in the East and the West from ancient time to medieval time with the following result. First, the moat in the East was installed of natural moat and artificial moat at the same time while the moat in the West had the fortress built in naturally advantageous site to use natural most substantially more. Second, the moats of Korea were smaller in scale compared to other countries (Japan, China and the Western countries). Third, the fortresses in the East were built to protect towns or royal palace while the West had the fortress to protect the residence of kings, lords, great wealthy persons and the like, and they were used jointly with the natural moat and artificial moat to defend against the infiltration of enemy. Fourth, the Pungsujiri in the Orient is one of the numerous ideologies forming the supplementary ideologic system of Korean people that could not be denied as the perception that influences on Korean people after the Silla Dynasty, and this Pungsujiri was considered when determining the location of the castle. The moat surrounding the castle had the role to keep the good energy in the castle from escaping away. Fifth, the Ha-Ha technique in the west was designed to prevent the external power from infiltration by digging the ditch on the place applicable to the boundary of the garden site, rather than the fence. While walking around along the water-side path without knowing the existence of this ditch, when the road is discovered with the cut off in the ditch, people had the exclamation without actually recognizing such astonishment. It was originally the dike for military purpose during the medieval time that was designed to look into the garden without physical boundary surrounded with the vertical fence in the garden that by having the deep ditch like shape on the boundary line of the garden which was designed to form the farm by preventing various types of cattle from coming inside the garden and bring in the garden element for farms, forestry, agricultural land and the like.