• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.8
• /
• pp.336-342
• /
• 2018

Noise reduction is an important issue in auxiliary power unit(APU) of tracking equipments for using military. In this study, we designed and tested reduction methods of structure borne noise and airborne source noise at the auxiliary power unit. From the bench test results, it is found that the effect of noise reduction is about 22 dB(A) if the silencer is redesigned, which is the rescue structure. However, the influence of noise reduction by air is insufficient. In addition, it is confirmed that the effect of noise reduction is excellent when structure borne noise reduction is applied to the vehicle. We expected that the test results of this study are used as basic data to reduce the noise of other tracking equipment developed later.

• Journal of Advanced Navigation Technology
• /
• v.20 no.3
• /
• pp.210-217
• /
• 2016

Damage caused by FOD which is a foreign substance at the movement area in airports around the world has reached 200 million every year. In 2000, the casualties occurred 133 people at charles de gaulle airport due to FOD. The occurrence of damage by FOD has continuously influenced in domestic also it makes equipment repair indirectly or directly. Accordingly, One of the solutions to the problem is the development of FOD automatic detection system. That is ongoing for plane movement area in airport. As the analyzed result, the military airport prefered mobile type and the civil airport prefered fixed type due to the characteristics of the operating type. In this paper, we analyzed the minimum performance specifications meeting the domestic requirements by investigating military and private FOD detection systems.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.23 no.1
• /
• pp.59-65
• /
• 2020

Many technologies are being studied to reduce the RCS(Radar Cross Section) of stealth aircraft. Most RCS-reduction technlogies correspond to platforms. It is important to identify factors that RCS performance through simulation analysis of aircraft Mounted equipment. In particular, there are no studies of RCS performance in the radar frequency band when antenna transmit signals are applied. In this paper, the RCS performance variation on the transmit signal on/off of antennas mounted on a stealth aircraft was verified. Antennas were selected for each frequency band and simulated analysis to the RCS performance changes during antenna transmitting signal. Finally, to verify the characteristics of the change in RCS performance, RCS test measurements on the low-profile antenna transmit signal on/off were performed. In addintion, antenna RCS test measurement was performed according to the change of transmit signal power output. As a result, it was confirmed that there is no change in RCS performance when an antenna transmit signal is applied.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.2167-2168
• /
• 2006

Mobilecomputer of offers more fundamental role than role assistance enemy of modem technology equipment and new Information Technology can reconsider, and reconstruct creatively accuracy of physiological concept. That military register symptoms are developed of disease, before far before rehalibitation, of for possibility that can intervene in process that motive change of military register symptoms after rehalibitation. But, that many parameters become analysis target and mathematical settlement and equalization system of noted data of that is huge, same time collection of all datas can lift difficulty etc.. These main weakness puts in structural relation between elements that compose system. Therefore, dynamics research that time urea of systematic adjustment has selected method code Tuesday nerve dynamics enemy who groping of approach that become analysis point is proper and do with recycling bioelectricity signal. Nature model of do living body signal digital analysis chapter as research result could be developed and scientific foundation groping could apply HSS (Hardware-software system) by rehalibitation purpose. Special quality that isdone radish form Tuesday of bioelectricity signal formation furthermore studied, and by the result, fundamental process of bodysignal in do structure circuit form of analog - digital water supply height modelling do can.

• Journal of the Korean Data and Information Science Society
• /
• v.28 no.6
• /
• pp.1437-1445
• /
• 2017

This paper suggests a temperature guidance which must be addressed in the preparation of specifications for military equipment used in ocean/coastal environment of the Korean peninsula. It would often be costly to design materiel to operate under the most extreme environmental conditions ever recorded. Therefore, military planners usually accept equipments designed to operate under environmental stresses for all the time except a certain small percentage of the time. In this study, an 1-percent frequency of occurrence is recommended. Pohang and Shineiju are chosen to represent the hottest and coldest regions, respectively, based on surface weather observations among 28 costal regions from 1904 to 2015. The 1st and 99th percentile temperatures for Pohang and Shineiju are $37.7^{\circ}C$ and $-23.7^{\circ}C$, respectively. Diurnal cycles, including solar radiation, relative humidity and wind-speed are also provided.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.2
• /
• pp.222-231
• /
• 2011

In this paper, we have proposed a method which can make it possible to stably transmit and receive data like the ARC-164 radio frequency hopping environment as a S/W packet modem with PSK modulation. This is a method that the S/W packet modem with PSK digital modulation and the use of PC sound cards change over from data to voice signals and then transmit/receive data. We confirmed not only that it is possible to solve the slow speed communication with the use of sending data through multi-channels and PSK modulation that has the ability to methodically improve transmission rates, but also that it is possible to send the state of frequency hopping stably. In conclusion, we've confirmed both tactical values that though the transmission rate may be a tad slow, a state of frequency hopping of more than 94% confidence plus voice and data can be sent via radio at the same time. In this paper, the proposed S/W packet modem is only an implemented S/W component, so when we apply it to aircraft that we don't consider EMC problems with, then we have the advantage of a wider use of conventional UHF/VHF/HF radio that is possible to voice communication. If we recognize these operational requirements, we can apply for a lot of field equipment efficiently.

• Journal of the military operations research society of Korea
• /
• v.32 no.1
• /
• pp.90-112
• /
• 2006

The main purpose of this study is to develop an economical efficiency and maximize efficient characteristic of national defense supply. It's very important to select a supply unit which is excellent in business because it's maximize its efficiency in procurement. So this study focused on the users' dissatisfactions and the elements which have an effect on procurement, especially when they have a general competition contract. In order to have a good result, we studied the papers from Ministry of National Defense supply headquarters and the National Defense Quality Control Office, and referred to various data which contracted within recent 2 years and collect users' dissatisfactions in 3 years in track and mobile equipment field. And we present a analysis between the dissatisfactions and the elements of procurement method by SPSS 12.0.

• Journal of the military operations research society of Korea
• /
• v.34 no.2
• /
• pp.63-77
• /
• 2008

With the limited frequency spectrum and an increasing demand for cellular communication services, the problem of channel assignment becomes increasingly important. However, finding a conflict free channel assignment with the minimum channel span is NP hard. The innovations are cellular concept, dynamic channel assignment and hierarchical network design. We consider the frequency assignment problem and the base station placement simultaneously. Our model takes the candidate locations emanating from this process and the cost of assigning a frequency, operating and maintaining equipment as an input. Hierarchical network design using genetic algorithm is the first three-tier (Macro, Micro, Pico) model. We increase the reality through applying to Electromagnetic Compatibility Constraints. Computational experiments on 72 problem instances which have $15{\sim}40$ candidate locations demonstrate the computational viability of our procedure. The result of experiments increases the reality and covers 90% of the demand.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.1
• /
• pp.43-49
• /
• 2016

This paper addresses the problem of the software update or upgrade of embedded equipments on a missile assembly with booster. Because the embedded equipments are assembled delicately and closely one another with various communication and power cables, they should be very carefully disassembled to directly upgrade the software of a certain embedded equipment. This may cause not only the costs for disassembly and reassembly but also additional tests to verify the completeness of the reassembled missile as a missile assembly with booster. This paper presents an indirect data transfer technique based on MIL-STD-1553B through Guidance Control Unit to easily upgrade the software of other equipments without any additional costs caused by disassembly and reassembly. The presented technique was successfully applied to the software upgrade of various equipments on real missile assembly with booster.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.10
• /
• pp.366-373
• /
• 2019

Combat uniforms require higher tensile and tear strength than civilian products, and applied infrared reflectance from the recently developed nighttime fluoroscopy equipment to ensure combatant survival at night. Unlike other uniforms for civilian use, combat uniforms require durability against laundering because they may not be supplied again, once originally provided. Therefore, this study examined the changes in strength and changes in infrared reflectance after multiple washing of combat uniforms. The experiment confirmed that the strength change after the washing of combat uniforms 15 times was maintained in the same manner as the result after washing five times. In the case of infrared reflectance, the difference in reflectance after multiple washing treatments was greater than that in the case where washing was not performed. Therefore, although the durability in the case of combat uniforms is strong, it is necessary to maintain a reflectance higher than a certain level through the development of materials and the development of dyes.