• 한국가시화정보학회지
• /
• 제8권1호
• /
• pp.46-52
• /
• 2010

In the present study, we employed the confocal laser scanning microscopy (CLSM) system to visualize the blood flow field with $1{\times}1{\mu}m^2$ spatial resolution. Based on the confocal microscopic image of red blood cells (RBCs), we performed the velocity vector field measurement and evaluated characteristics of cell migration from the cell depleted layer thickness calculation. The rat and mouse's blood were supplied into a micro glass tubes in vitro. The line scanning rate of confocal microscopy was 15 kHz for a $500{\times}500$ pixels image. As a result, the red blood cell itself can be used as a tracer directly without any kind of invasive tracer particle to get the velocity vector field of blood flow by performing particle image velocimetry (PIV) technique.

• 대한기계학회논문집B
• /
• 제21권10호
• /
• pp.1284-1293
• /
• 1997

The electrostatic effect on particle deposition onto a heated, Horizontal free-standing wafer surface was investigated numerically. The deposition mechanisms considered were convection, Brownian and turbulent diffusion, sedimentation, thermophoresis and electrostatic force. The electric charge on particle needed to calculate the electrostatic migration velocity induced by the local electric field was assumed to be the Boltzmann equilibrium charge. The electrostatic forces acted upon the particle included the Coulombic, image, dielectrophoretic and dipole-dipole forces based on the assumption that the particle and wafer surface are conducting. The electric potential distribution needed to calculate the local electric field around the wafer was calculated from the Laplace equation. The averaged and local deposition velocities were obtained for a temperature difference of 0-10 K and an applied voltage of 0-1000 v.The numerical results were then compared with those of the present suggested approximate model and the available experimental data. The comparison showed relatively good agreement between them.

• 지구물리와물리탐사
• /
• 제14권1호
• /
• pp.58-68
• /
• 2011

전기 및 탄성파 탐사를 이용한 이산화탄소 지중저장의 모니터링의 기초연구로써, 수포화 암석시료에 $CO_2$주입시 비저항과 P파속도를 측정하였다. 암석시료는 Berea사암이며, $CO_2$는 초임계상태 (10 MPa, $40^{\circ}C$)로 주입하였다. 초임계 $CO_2$주입에 의해 비저항의 증가 및 P파속도와 진폭이 감소하였다. P파 속도 토모그램은 암석시료에 주입한 초임계 $CO_2$의 거동양상을 보여주었다. 비저항과 탄성파속도는 $CO_2$거동 모니터링하는데 유용하다. 그러나 P파 속도는 비저항 변화에 비해 $CO_2$포화도가 20% 이상 일때 변화를 보이지 않았다. 비저항으로부터 $CO_2$포화도 예측은 탄성파 속도로부터 $CO_2$포화도 예측의 어려움을 보완할 수 있다. 비저항과 탄성파 속도의 동시측정에 의해 암석시료에 주입한 초입계 $CO_2$ 거동 및 $CO_2$포화도 분포를 예측할 수 있다.

• Current Research on Agriculture and Life Sciences
• /
• 제16권
• /
• pp.15-23
• /
• 1998

본 실험에서는 수리구조물의 보호되는 토립자의 필터내 이동과 이로인한 필터의 기능 저하를 실험을 통하여 비교분석한 결과 다음과 같은 결론을 얻었다. 1. 수두가 높고 공극이 클수록 필터내 세사의 이동은 심했으며 조기에 흐름의 안정화에 도달하게 되었지만 필터외부로의 입자유출도 많았으며, 공극이 작고 유속이 빠르면 필터와 모래의 접촉면에 인접한 곳에서 Blocking현상이 크게 일어남을 알 수 있었다. 2. 필터기능에 영향을 주는 세사의 이동은 공극의 크기와 수두에 큰 영향을 받음을 알 수 있었고, USCE 필터와 USSPL 필터는 공극이 크기 때문에 같은 조건하에서 흐름의 안정이 다른 필터들 보다 조기에 이루어 졌다. 3. 세사의 이동잔류량은 USSPL, USCE, USBR, Newton & Hurley, Bertram 필터순으로 많이 나타났다. 4. 흐름의 안전에 소요된 시간은 Bertram, Newton & Hurley, USBR, USSPL, USCE 필터순으로 적었고, 투수계수는 USBR, Bertram, Newton & Hurley, USSPL, USCE 필터순으로 크게 나타났다. 5. 여러 가지 종류의 필터기준중 USCE와 USSPL기준의 필터가 투수계수의 안정에 소요된 시간이 가장 짧고, 세사의 이동량이 적으므로 가장 적합한 것으로 인정된다.

• Korean Membrane Journal
• /
• 제9권1호
• /
• pp.18-26
• /
• 2007

The transport and removal characteristics of cobalt ions were investigated in a continuous electrodeionization with cation exchange textile (CEDI-CET). It was shown that the removal properties of cobalt ions are strongly dependent on the operating parameters such as temperature, flow velocity, and the solution pH. The transport and removal of cobalt ions was mainly related to the sorption on the surface and the convection and electro-migration through the ion exchange medium. In this study, the CEDI-CET showed good process performance for the removal of metal ions compared with the conventional CEDI with resins.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권3호
• /
• pp.177-185
• /
• 2000

In this study, the characteristics of various electricity and high resistivity ash collection were measured at superimposed nanosecond pulse energization. The pulse was generated through the hydrogen thyratron. Superimposed pulse was nanosecond duration pulse that had fast pulse rising time 100[ns], short pulse width 500∼850[ns] and pulse fall time 400∼750[ns]. The results of this study are summarized as followings; Frist, compared with the DC ESP(electrostatic precipitator), superimposed pulse ESP could induce higher peak voltage, and had the about 30[%] reduction of ESP collection area and 50∼80[%] reduction of power consumption. showing the same efficiency. Second, enhancement factor H had 1.9∼3.6 with the increase of migration velocity.

• 한국작물학회지
• /
• 제13권
• /
• pp.73-76
• /
• 1973

Protein spectra from 6 species of Gossypium were obtained by disc electraphoresis of seed extracts. Protein extracts were made by soaking 0.5g. of seed in 15ml of Tris-glycine buffer for 24 hours. Gels 24 hours. Gels were stained in 0.5% Amido Black solution for 1 hour, and destained in 7% acetic acid for 72 hours. Nine to 15 bands were visible in each gel. Homologies of Protein bands among the species were determined by migration velocity. Evidences obtained from electrophoretic separation of seed Protein were consistent with those from genetic, cytological, morphological and Phenogenetic methods regarding the origin of New World cultivated cottons. Possibility, however, does not exist to exclude Gossypium herbaceum from one of the Progenitors of New World cultivated cottons from electrophoretic evidences alone.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.402-409
• /
• 2003

Inversion of traveltime requires an efficient algorithm for computing the traveltime as well as its $Frech\hat{e}t$ derivative. We compute the traveltime of the head waves using the damped wave solution in the Laplace domain and then present a new algorithm for calculating the $Frech\hat{e}t$ derivative of the head wave traveltimes by exploiting the numerical structure of the finite element method, the modem sparse matrix technology, and SWEET algorithm developed recently. Then, we use a properly regularized steepest descent method to invert the traveltime of the Marmousi-2 model. Through our numerical tests, we will demonstrate that the refraction tomography with large aperture data can be used to construct the initial velocity model for the prestack depth migration.

• 한국전기전자재료학회논문지
• /
• 제21권3호
• /
• pp.236-241
• /
• 2008

The effect of organic solvent mixture ratio on the rheology property of slurry and thickness control of ceramic green sheet was investigated. For selecting a suitable dispersant multiple light scattering method was used to evaluate the particle migration velocity and variation of clarification layer thickness. Using the selected dispersant the dispersion property of solution according to solvent mixture ratio was investigated. Binder and plasticizers were added to formulate slurries and their viscosity was evaluated according to solvent mixture ratio. Ceramic green sheets with average thickness of 30, 50 urn were fabricated via tape casting and their thickness tolerances measured. As a result according to solvent mixture ratio the solution and slurry properties varied and for the mixture ratio of ethanol/toluene of 80/20 the ceramic green sheet with the lowest thickness tolerance was obtained.

• Ocean and Polar Research
• /
• 제29권4호
• /
• pp.311-316
• /
• 2007

Ocean noise may be used for monitoring wind speed and rainfall rate on the sea surface, as well as for tracking whales' migration routes. In particular, low-frequency ocean noise has recently been of concern with relation to the behavior of marine mammals. Low-frequency ocean noise has been increasing over the past few decades due to increase of ship traffic and offshore oil industry activities. Mechanical noise such as flow noise and cable strumming noise may be induced if low-frequency ocean noise is measured by cabled traditional hydrophone in high current areas. To successfully measure low-frequency ocean noise in a shallow water environment with strong current, we developed a self-recording hydrophone. This paper describes the main configurations of the self-recording hydrophone and presents some results on measured data.