• 제목/요약/키워드: Migration velocity

검색결과 129건 처리시간 0.025초

Transport Parameters of 99Tc, 137Cs, 90Sr, and 239+240Pu for Soils in Korea

  • Keum, D.K.;Kim, B.H.;Jun, I.;Lim, K.M.;Choi, Y.H.
    • Journal of Nuclear Fuel Cycle and Waste Technology
    • /
    • 제1권1호
    • /
    • pp.49-55
    • /
    • 2013
  • To characterize quantitatively the transport of $^{99}Tc$ and the global fallout ($^{137}Cs$, $^{90}Sr$, and $^{239+240}Pu$) for soils in Korea, the transport parameters of a convective-dispersion model, apparent migration velocity, and apparent dispersion coefficient were estimated from the vertical depth profiles of the radionuclides in soils. The vertical profiles of $^{99}Tc$ were measured from a pot experiment for paddy soil that had been sampled from a rice-field around the Gyeongju radioactive waste repository in Korea, and the vertical depth distributions of the global fallout $^{137}Cs$, $^{90}Sr$, and $^{239+240}Pu$ were measured from the soil samples that were taken from local areas in Korea. The front edge of the $^{99}Tc$ profiles reached a depth of about 12 cm in 138 days, indicating a faster movement than the fallout radionuclides. A weak adsorption of $^{99}Tc$ on the soil particles by the formation of Tc(VII) and a high water infiltration velocity seemed to have controlled the migration of $^{99}Tc$. The apparent migration velocity and dispersion coefficient of $^{99}Tc$ for the disturbed paddy soil were 2.88 cm/y and 6.3 $cm^2/y$, respectively. The majority of the global fallout $^{137}Cs$, $^{90}Sr$, and $^{239+240}Pu$ were found in the top 20 cm of the soils even after a transport of about 30 years. The transport parameters for the global fallout radionuclides were 0.01-0.1cm/y ($^{137}Cs$), 0.09-0.13cm/y ($^{90}Sr$), and 0.09-0.18cm/y ($^{239+240}Pu$) for the apparent migration velocity: 0.21-1.09 $cm^2/y$ ($^{137}Cs$), 0.12-0.7$cm^2/y$ ($^{90}Sr$), and 0.09-0.36$cm^2/y$ ($^{239+240}Pu$) for the apparent dispersion coefficient.

가스 하이드레이트 부존층의 하부 경계면을 규명하기 위한 심도영역 탄성파 구간속도 분석 (Seismic interval velocity analysis on prestack depth domain for detecting the bottom simulating reflector of gas-hydrate)

  • 고승원;정부흥
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2005년도 춘계학술대회
    • /
    • pp.638-642
    • /
    • 2005
  • For gas hydrate exploration, long offset multichannel seismic data acquired using by the 4km streamer length in Ulleung basin of the East Sea. The dataset was processed to define the BSRs (Bottom Simulating Reflectors) and to estimate the amount of gas hydrates. Confirmation of the presence of Bottom Simulating reflectors (BSR) and investigation of its physical properties from seismic section are important for gas hydrate detection. Specially, faster interval velocity overlying slower interval velocity indicates the likely presences of gas hydrate above BSR and free gas underneath BSR. In consequence, estimation of correct interval velocities and analysis of their spatial variations are critical processes for gas hydrate detection using seismic reflection data. Using Dix's equation, Root Mean Square (RMS) velocities can be converted into interval velocities. However, it is not a proper way to investigate interval velocities above and below BSR considering the fact that RMS velocities have poor resolution and correctness and the assumption that interval velocities increase along the depth. Therefore, we incorporated Migration Velocity Analysis (MVA) software produced by Landmark CO. to estimate correct interval velocities in detail. MVA is a process to yield velocities of sediments between layers using Common Mid Point (CMP) gathered seismic data. The CMP gathered data for MVA should be produced after basic processing steps to enhance the signal to noise ratio of the first reflections. Prestack depth migrated section is produced using interval velocities and interval velocities are key parameters governing qualities of prestack depth migration section. Correctness of interval velocities can be examined by the presence of Residual Move Out (RMO) on CMP gathered data. If there is no RMO, peaks of primary reflection events are flat in horizontal direction for all offsets of Common Reflection Point (CRP) gathers and it proves that prestack depth migration is done with correct velocity field. Used method in this study, Tomographic inversion needs two initial input data. One is the dataset obtained from the results of preprocessing by removing multiples and noise and stacked partially. The other is the depth domain velocity model build by smoothing and editing the interval velocity converted from RMS velocity. After the three times iteration of tomography inversion, Optimum interval velocity field can be fixed. The conclusion of this study as follow, the final Interval velocity around the BSR decreased to 1400 m/s from 2500 m/s abruptly. BSR is showed about 200m depth under the seabottom

  • PDF

AN ANALYSIS OF THE EFFECT OF HYDRAULIC PARAMETERS ON RADIONUCLIDE MIGRATION IN AN UNSATURATED ZONE

  • Kim, Gye-Nam;Moon, Jei-Kwon;Lee, Kune-Woo
    • Nuclear Engineering and Technology
    • /
    • 제42권5호
    • /
    • pp.562-567
    • /
    • 2010
  • A One-Dimensional Water Flow and Contaminant Transport in Unsaturated Zone (FTUNS) code has been developed in order to interpret radionuclide migration in an unsaturated zone. The pore-size distribution index (n) and the inverse of the air-entry value ($\alpha$) for an unsaturated zone were measured by KS M ISO 11275 method. The hydraulic parameters of the unsaturated soil are investigated by using soil from around a nuclear facility in Korea. The effect of hydraulic parameters on radionuclide migration in an unsaturated zone has been analyzed. The higher the value of the n-factor, the more the cobalt concentration was condensed. The larger the value of $\alpha$-factor, the faster the migration of cobalt was and the more aggregative the cobalt concentration was. Also, it was found that an effect on contaminant migration due to the pore-size distribution index (n) and the inverse of the air-entry value ($\alpha$) was minute. Meanwhile, migrations of cobalt and cesium are in inverse proportion to the Freundich isotherm coefficient. That is to say, the migration velocity of cobalt was about 8.35 times that of cesium. It was conclusively demonstrated that the Freundich isotherm coefficient was the most important factor for contaminant migration.

2차원 중합전 일반화된-막 구조보정 (2D Prestack Generalized-screen Migration)

  • 송호철;설순지;변중무
    • 지구물리와물리탐사
    • /
    • 제13권4호
    • /
    • pp.315-322
    • /
    • 2010
  • 위상막 구조보정과 split-step Fourier 구조보정은 주파수-파수, 주파수-공간 영역에서 단방향 파동방정식을 이용하여 빠른 계산 속도로 수평적 속도변화를 고려할 수 있는 구조보정이다. 일반화된-막(generalized-screen) 구조보정은 주파수-파수영역에서 수직전파를 가정하는 위의 두 구조보정과는 달리 수직전파를 가정하지 않고, 지수함수의 무한급수 전개를 이용한다. 또한 수직느리기항의 테일러 급수전개를 일반화하여 고차항을 추가함으로써 급격한 속도변화를 갖는 지하구조에서 넓은 각으로 전파하는 파동장에 대한 정확도를 향상시켰다. 이 논문은 다양한 경사와 급격한 속도변화를 포함하는 복잡한 지하구조를 효율적으로 보다 정확하게 영상화하기 위하여 2차원 일반화된-막 구조보정에 대하여 연구하였다. 일정한 미소변량(constant perturbation)을 갖는 매질과 SEG/EAGE 암염돔을 모사한 모델에 대하여 일반화된-막 전파자와 위상막 전파자의 전파된 파동장을 비교한 결과, 일반화된-막 전파자가 파동장의 넓은각 전파에 대해 위상막 전파자보다 높은 정확도를 보였다. 또한 일반화된-막 전파자의 차수를 증가시킬수록 넓은 각으로 전파하는 파동장의 정확도가 향상되었다. 큰 수평적 속도변화와 급경사를 갖는 모델과 SEG/EAGE 암염돔 합성 탄성파탐사 자료에 대하여 일반화된-막 구조보정과 위상막 구조보정을 적용한 결과, 일반화된-막 구조보정이 속도변화가 크고 급격한 경사를 갖는 반사면을 보다 정확한 위치에 뚜렷하게 영상화하였다.

수로의 형상과 하상조건에 따른 이행특성 (Migration characteristics with Forms of Channels and Bed Conditions)

  • 차영기;이종석
    • 물과 미래
    • /
    • 제26권1호
    • /
    • pp.103-114
    • /
    • 1993
  • 수로의 형상과 하상조건에 따른 이행특성을 일정반경곡선(CRC), 정현곡선(SGC) 및 미소지폭파 이론(SWT)의 방법에 의해 연구하였다. 수로의 형상이 사행이고, 하상조건이 거친 하상입자인 사행하천의 경우에는 CRC 및 SGC의 방법을 적용하여 횡방향 하상경사, 수심 및 유속분포의 예측치를 구하고, 이를 실측치와 비교하였다. 또한 가는 입자의 준사행하천(Sinuous Channels)에 대해서는 SWT의 방법을 이용하여 횡방향과 흐름방향의 사행이행량을 각각 구하였다. 그 결과 횡방향 질량이송계수는 사행이행의 크기 및 방향을 결정하는데 중요한 계수임이 확인되었다.

  • PDF

균일한 전단응력에 의한 혈관내피세포의 운동성 변화 (EFFECTS OF UNIFORM SHEAR STRESS ON THE MIGRATION OF VASCULAR ENDOTHELIAL CELL)

  • 신현정;송석현
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2008년도 추계학술대회A
    • /
    • pp.1404-1408
    • /
    • 2008
  • The migration and proliferation of vascular endothelial cells (VEC), which play an important role in vascular remodeling, are known to be regulated by hemodynamic forces in the blood vessels. When shear stresses of 2, 6, 15 dynes/$cm^2$ are applied on mouse micro-VEC in vitro, cells surprisingly migrate against the flow direction at all conditions. While higher flow rate imposes more resistance against the cells, reducing their migration speed, the horizontal component of the velocity parallel to the flow increases with the flow rate, indicating the higher alignment of cells in the direction parallel to the flow at a higher shear stress. In addition, cells exhibit substrate stiffness and calcium dependent migration behavior, which can be explained by polarized remodeling in the mechanosensitive pathway under shear stress.

  • PDF

Promotion of 3T3 and HDF Cell Migration by Gelatin-modified Fibroin Microspheres

  • Se Change Kwon;Won Hur
    • 공업화학
    • /
    • 제34권2호
    • /
    • pp.186-191
    • /
    • 2023
  • The goal of this study was to use gelatin to modify the surface of fibroin microspheres to enhance their biofunctionality for tissue engineering and regenerative medicine applications. Three different methods were used for the modification: coating, incorporation, and covalent bonding. Wound-healing assays demonstrated that gelatin modification of fibroin microspheres enhances 3T3 and HDF cell migration. Although the level of gelatin coverage varied depending on the method used, there was no significant difference between the modified microspheres. The gelatin-modified microspheres also increased the migration velocity of individual 3T3 cells. The results suggest that gelatin modification of fibroin microspheres is a promising approach for developing functional biomaterials with enhanced biological properties. Further optimization of gelatin modification is necessary to maximize the biofunctionality of fibroin microspheres.

정밀여과에서 임계플럭스(Critical flux)에 관한 이론 및 실험적 고찰 (The Critical Flux in Microfiltration: Comparison between Theoretical and Experimental Values)

  • 윤성훈;이정학
    • 멤브레인
    • /
    • 제7권3호
    • /
    • pp.150-156
    • /
    • 1997
  • 입자의 정밀여과에 있어 임계플럭스의 이론치를 계산하기 위해 확산(diffusion), 횡방향이동(lateral migration), 전단유도확산(shear induced diffusion), 그리고 입자의 정전기적 반발력에서 기인하는 상호작용에 의한 상승이동(interation enhanced migration) 등의 입자의 역전달 이동을 고려하였다. 보통의 여과조건에서 제타전위의 절대치가 20~40mV이고 직경이 0.1$\mu{m}$~10$\mu{m}$인 입자의 경우 상호작용에 의한 이동이 가장 중요한 역전달 메카니즘이었다. 입자크기에 따라 계산된 임계플럭스값을 실험적으로 확인하기 위해 다양한 크기를 갖는 구형인 적철광(hematite)입자를 합성하여 여과실험을 수행하였다. 이 실험치는 역전달 이론에 의해 예측된 플럭스의 이론치와 비교적 잘 일치하였다.

  • PDF

비탄성 매질의 진폭 감쇠 효과를 첨가한 일반화된 주파수-파수 구조보정 (Generalized Frequency-wavenumber Migration Implemented by the Intrinsic Attenuation Effect)

  • 박창업;심재헌
    • 한국석유지질학회지
    • /
    • 제1권1호
    • /
    • pp.47-52
    • /
    • 1993
  • 지진파의 전파속도와 감쇠정도가 불균질한 매질에서 2차원 지진파 단면자료에 대한 주파수-파수 영역에서의 구조보정 방법 및 그 결과를 제시한다. 파동전파의 감쇠효과를 포함시키기 위해 일반화된 주파수-파수 구조보정 방법을 개선하여 파동장의 상향 및 하향 외삽연산자에 복소수 전파속도를 사용한다. 이 복소수 전파속도의 허수 부분은 지진파 감쇠 척도인 Q 값을 포함하도록 한다. 불균질한 전파속도와 비탄성을 가진 매질 속에서의 전파방정식의 해를 얻기 위해, 불균질한 매질자체를 일정한 전파속도와 비탄성을 갖는 평균적 매질과 가상적 파동원의 불균질한 분포로 규합된 등가의 시스템으로 취급한다. 가상적 파동원은 전파속도와 매질비탄성의 불균질 정도에 따라 그 세기가 좌우된다. 이 방법에 의해 수 개의 구조 모델에 대해 수치적으로 계산된 결과는 기존의 일반화된 파수-주파수 구조 보정 방법에 의한 것보다 더욱 선명한 단면 영상을 보여주며 파의 비탄성에 의해 불명확하게된 영상신호가 복원된다. 이 방법은 석유나 천연가스가 부존된 구조 또는 파쇄대가 존재하는 지역에서 획득된 자료를 구조보정하는데 유용하게 쓰일 것이다.

  • PDF

선두파 중합을 이용한 천부지층의 영상화 (Subsurface Imaging using Headwave Stacking)

  • 박정재;고승원;신창수;서정희
    • 지구물리와물리탐사
    • /
    • 제5권3호
    • /
    • pp.178-184
    • /
    • 2002
  • 탄성파굴절법 탐사는 절차가 단순하고 경제적이기 때문에 대형 구조물 건설을 위한 지반조사나 지질조사에 널리 이용되고 있다. 본 연구에서는 굴절법 탐사자료에 Kirchhoff 구조보정 방법을 적용하여 다양한 모형자료의 반응을 알아보고, 이에 대한 결과를 고찰하여 굴절법 탐사 자료를 이용한 지하 경계면 영상화 기법의 적용성을 파악해보고자 하였다. 모형반응 계산에 필요한 인공주시곡선의 작성에는 Vidale(1988)이 제시한 알고리즘을 사용하였고, 모형에 따른 반응을 살펴보기 위해 2층, 3층 모형 및 불규칙한 지표면을 가지는 모형 등에 대해 다양하게 살펴보았다. 구조보정을 위한 초기 속도 모형으로는 실제 구조와 같은 모형, 토모그래피에 의한 역산 단면, 실제 구조를 평활화한 모형 등을 사용해 초기 속도 모형이 달라질 때 결과에 어떤 영향을 미치는가 살펴보았다. 각각의 모형에 본 연구에 사용된 기법을 적용해 본 결과 반사법 구조보정에 비해 초기 속도 모형에 더욱 민감하다는 것을 확인할 수 있었으며, 현장 자료에 적용되기 위해서는 적절한 초기속도모형을 결정해야 할 것임을 알 수 있었다.