• Radiation Oncology Journal
• /
• 제7권1호
• /
• pp.133-140
• /
• 1989

Three-dimension paraffin compensator was designed to construct the tissue equivalent compensator for irregular body contours and obiliques beam incidence. The ratio of compensator thickness to tissue deficit was depended on field size, depth and air gap because the scattered dose loss. The ratio of compensator-tissue was optimized 0.79, 0.73, 0.61 and 0.56 in 6MV x-rays as function of field size $4{\times}4$, $10{\times}10$, $20{\times}20$ and $30{\times}30cm^2$ respectively. in our study. Using this tissue equivalent compensator, it can be got 2% difference of dose at same mid-plane in phantom study.

• 전자공학회논문지A
• /
• 제32A권3호
• /
• pp.124-133
• /
• 1995

A theoretical self-consistent thermoelectric model has been developed for optimal thermal design in the self-signal processing infraed detectors. The model is achived by employing the coupled thermoelectric equation which allows which allows the simultaneous investigation of the termal and electrical aspects of device behavior. The thermal limitation of detectivity and responsivity are determined by the enegy gap, carrier concentration, lifetime, and mobility as a function of the temperature. The calculated results indicate that the detectivity is decreased at bias fields above about 50 V/cm, because the performence is limiting by temperature when the bias voltage reached the level associated with Joule heating. It has been also found that the improvement in the mid-band modulation transfer function(MTF) may be restricted by increasing the bias fields. Further, the important paramerers in the thermal optimization of SPIR detector, such as temperature in the device, ambipolar velocity, element thickness and length, are also considered. The analytical study provides a mathematical basis for optimal design of such a photoconductive IR detector and the agreement between the experimental and theoretical results are seen to be good.

• 한국전기전자재료학회논문지
• /
• 제17권9호
• /
• pp.983-987
• /
• 2004

We have studied electro-optic characteristics of reflective optically compensated splay (R-OCS) cell. The initial configuration of this cell is in splay form such that a mid director lies parallel to the substrate and around it hybrid structure is formed symmetrically so the optically compensation effect exists. Optimized optical configurations could be achieved by using a single polarizer, a quarter-wave film and a cell with quarter-wane retardation. The optimal cell retardation is 0.34 ${\mu}$m, allowing to have large cell gap. The cell provides high contrast ratio of 80:1 at normal direction and the region with contrast ratio over 5:1 covert up to 160$^{\circ}$ horizontally and vertically at all wavelength range.

• 산업노동연구
• /
• 제24권1호
• /
• pp.107-156
• /
• 2018

이 글은 일본 철강산업의 사내하청 활용 전개와 노사관계 안정에 관하여 조강생산량 1위와 2위인 대표적 제철회사를 대상으로 역사적으로 살펴보았다. 제철소 노동자 중 사내하청 노동자가 차지하는 비율은 전후 2000년대 중반까지 지속해서 증가하여 1위인 S사의 경우 약 70%였다. 사내하청은 고용의 수량적 유연성을 높여서 인건비 절약을 꾀하려는 기업의 전략으로 활용되었다. 사내하청 기업의 담당업무는 기업 특수적 숙련을 필요로 하였는데 그것에 대응하는 형태로 정규직의 비율이 높아지고 이직률도 낮아 내부노동시장이 형성되었다. 사내하청 기업이 업무수행에 필요한 설비나 자재를 자체 도입함으로서 원청과는 장기적인 거래관계를 맺게 되었고, 원청은 사내하청의 생산성 향상 정책을 실시하여 상생적인 관계가 전개되었다. 노조는 사내하청 확대가 기업 이익, 조합원의 고용안정 및 노동조건 유지 등에 기여하는 것으로 보고 반대하지 않았다. 출향과 전적을 통하여 사내하청이 확대되는 것도 마찬가지로 반대하지 않았다. 2000년 이후 원청이 사내하청 기업의 자회사화를 추진하여 상생적인 관계는 자본관계로 뒷받침 되었다. 그런데 2000년대 중반 이후 직영화의 움직임이 나타나고 있는데 그것은 법령준수 요구 강화, 고객의 품질향상과 납기 달성의 엄격성, 노동력 확보 등이 주요 요인이다. 원청과 사내하청간의 노동조건 격차는 임금의 경우 B사가 S사보다 작았는데 사내하청이 원청의 약 90%였다. 상대적으로 B사의 격차가 작은 것은 노조의 격차 축소 운동, 낮은 시장 지배력과 불리한 노동시장 등에 따른 것으로 보인다. 이와 같이 사내하청에도 내부노동시장이 형성되어 왔고, 원청과의 임금격차도 크지 않아 노사분쟁의 가능성이 낮다. 원청뿐만 아니라 사내하청에서도 노사관계는 안정되어 있다. 우리나라의 철강산업 노사관계 안정화는 원청과 하청기업간의 장기적 상생협력관계 하에서 하청기업에서 내부노동시장을 형성/확대하면서 생산성을 높여 원청과의 격차를 줄여나가는 것이 요구된다.

• 기술혁신학회지
• /
• 제16권2호
• /
• pp.476-505
• /
• 2013

우리나라 정부는 '저탄소 녹색성장'을 새로운 국가발전 패러다임으로 제시한 이래로 '녹색기술 연구개발 종합대책('09.1)'을 통해 27대 중점 녹색기술을 도출하는 등 녹색성장의 중심으로 녹색기술 개발 전략을 수립 추진해 왔다. 본 연구에서는 대규모 녹색기술 전문가 집단이 참여하여 델파이 조사 기법을 활용한 27대 중점 녹색기술 내 총 131개의 전략제품 서비스 기술을 대상으로 기술수준 조사를 실시하였다. 2011년 기준으로 중점 녹색기술 전체에 대한 주요 5개국의 기술수준은 세계최고기술보유국(미국) 대비 EU(99.4%), 일본(95.3%), 한국(77.7%), 중국(67.1%) 순이며, 한국은 5개국 중 4위를 차지하였다. 세계최고기술보유국(미국)과 한국과의 기술격차년수는 4.1년으로 EU(3.9년), 일본(3.1년)에는 뒤져 있는 반면, 중국에는 2.1년 앞선 것으로 조사되었다. 우리나라의 기술수준이 가장 높은 중점 녹색기술은 '개량형 경수로 설계 및 건설기술(90.1%)'이며, 이어서 '실리콘계 태양전지의 고효율 저가화 기술(85.0%)', '고효율 저공해 차량기술(84.5%)' 순으로 나타났다. 중점 녹색기술의 투자유형에 따른 기술수준은 단기(85.0%), 중기(77.3%), 장기(71.1%) 집중형 순이며, 기술수준이 낮을수록 중장기적인 투자를 요하는 것으로 나타나 전반적인 투자유형 설정은 적절한 것으로 조사되었다.

• 한국항공운항학회지
• /
• 제16권4호
• /
• pp.54-62
• /
• 2008

International organizations related to air transport such as ICAO, IATA, ACI are forecasting that the number of passenger will grow about 4.4% annually up to 2015. Therefore, the innovation of given system technology and operation procedure is required in global scale to cope with the increase of air traffic demand. CNS/ATM infrastructure based on satellite is considered to play key role in order to solve the problems due to the dramatic increase of air traffic demand over the world. Free flight concept in the air transport operation has been proved with CNS/ATM infrastructure especially in USA and Europe. Therefore, it is necessary to develop key technologies to overcome technology gap and to secure international competitiveness in Korea. ADS-B is an important issue, and new element technologies should be considered as essential items which were shown in Capstone project. Nowadays, the free flight concept is combined to Air Transport Road Map such as NextGen project in USA, SESAR in Europe. In this process, free flight is included in the concepts such as ATM(Air Traffic Management), aviation security and safety, environmental protection and economy development, wide area weather variable reduction service, information integration and application between the related authorities (civil/military) etc. The purpose of research is to establish mid-term and long-term infrastructure plan and strategy for free flight realization in Korea. The analysis of action target and equipment construction status, phase construction plan of infrastructure has been performed by considering mid-term and long-term free flight plans of USA and Europe.

• 한국식생활문화학회지
• /
• 제11권5호
• /
• pp.663-671
• /
• 1996

The purpose of this study was to compare high-school students importance and performance toward restaurant service attributes for the marketing strategy development. Specific objectives were to: a) investigate restaurant patronage characteristics of high school students; b) identify the difference of patronage behavior among three types of restaurants; and c) analyze the importance and performance among three types of restaurants. A questionnaire was developed and hand-delivered to 400 students enrolled 9th grade in 4 different high schools in Seoul. A total of 320 students (80%) was responded to this study. The questionnaire was composed of two parts with 47 restaurant service attribute statements. Results of this study were as follows: 1. A total of 57% was female and 61% of respondents spent less than ￦5,000 per week on eating out. 2. The frequency of visiting the low-priced restaurant was 8.9 times per week. 3. Reasons for being a patronage to low- (${\geq}$￦2,000) and mid-priced ( <￦2,000 and ${\geq}$￦5,000) restaurants were hunger, appointment, and seeking favorites with freinds but the reason for high-priced (<￦5,000) restaurants was celebrating special days with parents. 4. The main source of information for selecting restaurants was family and friends, T.V. advertising, and bulletin board. 5. For the low-priced restaurants, food, hygiene, price, and location were rated as important; location, price, menu, and food were rated as satisfied. 6. For the mid-priced restaurants, hygiene, food, price, and menu were rated as important; food, hygiene, service, and menu were rated as satisfied. 7. For the high-priced restaurants, hygiene, food, and atmosphere were rated as important; food, hygiene, atmosphere, and menu were as satisfied. 8. According to paired t-test, the score gap between importance and performance was the highest in the hygiene attribute; differences were high with the low-priced and low with high-priced restaurants.

• 건축역사연구
• /
• 제30권6호
• /
• pp.71-80
• /
• 2021

This study tries to shed light on character and architectural features of the 2nd construction of Bunhwangsa temple in the mid-8th century. The site of Bunhwangsa Temple is divided into upper and lower areas based on retaining walls running from northwest to southeast, and the main area of the temple centered on Geumdang(the main hall) is located in the upper area. Space composition of the lower area including Wonji(a garden pond) and Gangdang(a lecture hall), is noteworthy in that Bunhwangsa Temple was constructed in a deviating way from rigorous constructional disciplines and used their space efficiently. The Geumdang in the 2nd construction was the largest worship hall with 7×6 bays. The hall was designed to divide its space into two ; the core space was surrounded by outer space. Each gap between columns in the hall was narrowed from center to outer. The main construction of the Geumdang was built as a stable structure with lead-to corridors. This was a much-advanced style than Geumdang at Hwangnyongsa Temple. The Gangdang is presumed to be a large building site as a typical Gangdang style in the Silla era. It was built in the late 9th century and was located in the northern part of the retaining walls. The composition of the middle gate and southern corridors were in double and long corridor style and they were located in front of the 2nd construction. This style coincided in the form of the architectural style of the Hwangnongsa Temple. The 2nd construction of the Bunhwangsa Temple was smaller than the Hwangnongsa Temple. However, it was a prestigious architecture.

• Journal of Korea Trade
• /
• 제25권3호
• /
• pp.1-20
• /
• 2021

Purpose - The purpose of this paper is to examine the welfare effects of standards harmonization between technologically asymmetric countries, and to determine optimal harmonization strategies for a country with mid-level technological advancement. Design/methodology - Following Salop's circular city model (Salop, 1979), this study constructs a simple, horizontally-differentiated oligopoly model in which three firms and three countries exist. Each country adopts different compatibility standards and each firm incurs conversion costs for foreign market access due to differences in standards. The conversion costs are related to technology; standards harmonization removes these costs between participating countries. The paper considers three cases: i) no harmonization; ii) harmonization with the more technologically-advanced country and iii) harmonization with the less technologically-advanced country. Findings - The paper first considers a scenario in which all three firms occupy some share of the market in each country. It shows that standards harmonization with both the technologically moreor less-advanced country always increases consumer surplus and social welfare. In addition, the producer surplus will increase if the harmonization partner has a higher technology level, whereas it may decrease if the partner has a lower technology level. It also shows that if most domestic export goods are in sectors with conversion costs above a certain level, harmonizing standards with a technologically more-advanced country should be prioritized. Such strategies, moreover, should be emphasized when there exists a large technology gap among countries. Lastly, the paper considers another scenario, in which harmonization leads to the foreclosure of the non-member firm from the member countries' markets. It shows that harmonization improves the social welfare of a mid-level technology country regardless of its partner's technology. It also shows that the country should prioritize harmonization with the technologically less-advanced country. Originality/value - Though some of the existing studies consider the welfare effects of harmonization, their main assumption is that firms have the same conversion technology. Since complying with standards often requires substantial technological advancement and technical expertise, harmonization of compatibility standards between countries with gaps in technological ability carries different implications. This paper investigates the welfare effects of this harmonization and determines an optimal harmonization strategy while considering technological asymmetry among countries in standards compliance.

• 한국환경생태학회지
• /
• 제33권2호
• /
• pp.187-201
• /
• 2019

본 연구에서는 2008년 6월과 2009년 5월 조사기간 동안 금강의 상 중 하류부의 14개 지점을 선정해서 이 화학적 수질의 특성을 파악하였으며 어류군집의 분포 및 길드 분석과 어류생물통합지수(Fish Assessment Index, FAI)의 다변수 8개 메트릭을 이용해 금강 수계의 건강도를 평가하였다. 수질 변수 평균 변화를 분석해 본 결과 중상류지점은 수질변수의 변이양상이 크게 없었고 갑천과 미호천이 합류되는 지점부터 유기물질이 축적되어 수질 변수가 급격한 변이양상을 보였다. 이 화학적 수질 특성을 분석한 결과, 미호천과 갑천이 합류되는 하류지점부터 BOD, COD, TN, TP, Cond, Chl-a는 증가하는 경향을 보였고 DO는 감소하여 부영양화와 녹조현상이 진행되고 있는 것으로 사료된다. 어류 군집 분석 결과, 종 풍부도지수와 종 다양도 지수는 중상류지점에서는 증가한 양상을 보인 반면 하류구간에서는 감소하는 양상을 보여 상류는 생태적 안정성은 양호하고 하류는 생태적으로 비교적 불안정한 것으로 보였다. 어류종 분포 분석결과 우점종은 피라미(Zacco platypus)이며 전체 어종의 20.9%를 차지하였고 아우점종은 참갈겨니(Zacco koreanus)가 13.1%를 차지했다. 어류 내성도 및 섭식길드 특성 분석에 따르면, 중상류지점에는 민감종, 충식성 그리고 여울성 어종이 우점한 반면 미호천이 유입되면서 하수종말처리장 오염원으로 영향을 받는 하류구간부터 내성종, 잡식성 그리고 정수성 어종 우점에 결정적인 영향을 준 것으로 나타났다. 따라서 우리는 수질 상태를 개선하기 위해 특히 도심 오염원의 부하량을 줄이도록 노력해야 하며 수생태계 보존과 복원에 관심이 필요한 것으로 요구된다.