• KIEE International Transactions on Electrophysics and Applications
• /
• v.5C no.4
• /
• pp.176-179
• /
• 2005

The increasing demand for high density packaging technologies and the evolution to mixed digital and analogue devices has been the con-set of increasing research in thin film multi-layer technologies such as the passive components integration technology. In this paper, Cu and TaO thin film with RF sputtering was deposited for spiral inductor and MOM capacitor on the $SiO_2$/Si(100) substrate. MOM capacitor and spiral inductor were fabricated for L-C band pass filter by sputtering and lift-off. We are analyzed and designed thin films L-C passive components for band pass filter at 900 MHz and 1.8 GHz, important devices for mobile communication system. Based on the high-Q values of passive components, MOM capacitor and spiral inductors for L-C band pass filter, a low insertion loss of L-C passive components can be realized with a minimized chip area. The insertion loss was 3 dB for a 1.8 GHz filter, and 5 dB for a 900 MHz filter. This paper also discusses a analysis and practical design to thin-film L-C band pass filter.

• Electrical & Electronic Materials
• /
• v.12 no.8
• /
• pp.39-45
• /
• 1999

Comparative photoresponsive current-volt-age characteristics of n-channel PHEMT and MESFET on GaAs substrate. with (W/L)=200${\mu}{\textrm}{m}$/1${\mu}{\textrm}{m}$ of gates, are reported as a function of electro-optical stimulation (P\ulcorner, λ=830nm) for the first time as far as we know. Significantly different photoresponses are observed in MESFET and PHEMT, mainly due to different optoelectronic mechanisms in the formation and current conduction of channel carriers. Under high optical power, high photoresponsity with a strong non-linearity with P\ulcorner, predominantly due to a parallel conduction via a heavily doped Al\ulcornerGa\ulcornerAs donor layer, was observed in PHEMT while the optically induced drain current has been very small but monotonically increasing with optical stimulation in GaAs MESFET. We also investigated differences in optically stimulated gate leakage currents and photonic gate responses on gate voltage and drain voltage as a function of P\ulcorner. Based on the drain and gate responses to electro-optical stimulation. PHEMTs are expected to be a better candidate for high performance photonically responsive microwave device compared with MESFETs.

• Proceedings of the KIEE Conference
• /
• 2006.10a
• /
• pp.115-116
• /
• 2006

Dielectric PST (20/80) / PST (80/20) heterolayered thin films structures were created by a consequent deposition of the PST (20/80) and PST (80/20) thin films on the $Pt/Ti/SiO_2/Si$ substrate using alkoxide-based sol-gel method. Both structural and dielectric properties of heterolayered PST thin films were investigated for the tunable microwave device applications. As the number of coating increases, the lattice distortion decreased. It can be assumed that the lower PST layer affects a nucleation site or a seeding layer for the formation of the upper PST layer. The dielectric constant, dielectric loss and tunability of the PST-6 heterolayered structure measured at 100 kHz were 399, 0.022 and 57.9%, respectively. All these parameters showed an increase with increasing number of coatings due to the decrease in lattice distortion.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.7
• /
• pp.840-843
• /
• 2012

In this paper, the authors present a new design for a dual-band metamaterial(MTM) absorber that utilizes resonant-magnetic inclusion of a split-ring resonator(SRR). The proposed MTM unit cell is constructed by two open complementary split-ring resonators(OCSRRs) and an SRR arrangement. To avoid the need for metallic back plate a planar array of SRRs for resonant-magnetic inclusion is placed facing toward the incident wave propagation direction. Each unit cell is printed on the two sides of a FR-4 substrate. A prototype absorber was fabricated with a planar array of $39{\times}39$ unit cells, and measured. The proposed backplane-less absorber can be used for microwave applications.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2011.05a
• /
• pp.117-118
• /
• 2011

초경합금 위에 RF Magnetron Sputter를 이용하여 Ti 중간층을 증착 후 MPECVD(Microwave Plasma Enhanced Chemical Vapor Deposition) 시스템을 이용하여 나노결정 다이아몬드 박막을 증착 하였다. 공정압력, 마이크로웨이브 전력, Ar/$CH_4$ 조성비, 기판온도를 일정하게 놓고 직류 bias의 인가 여부를 변수로 하고 증착시간을 0.5, 1, 2시간으로 변화시켜 박막을 제작하였다. 제작된 시편은 FE-SEM과 AFM을 이용하여 다이아몬드 박막의 표면과 다이아몬드 박막의 표면 거칠기 등을 측정하였고, Raman spectroscopy와 XRD를 이용하여 다이아몬드 결정성을 확인하였다. Automatic Scratch �岵謙�ter를 이용하여 복합박막의 층별 접합력을 측정하였다. 바이어스를 인가하지 않고 다이아몬드 박막을 증착할 경우 증착 시간이 증가할수록 다이아몬드 입자의 평균 크기가 증가하며 입자들이 차지하는 면적이 증가하는 것을 확인하였다. 그러나 1시간이 경과해도 아직 완전한 박막은 형성되지 못하고 2시간 이상 증착 시 완전한 박막을 이루는 것이 확인되었다. 이에 비해서 바이어스 전압을 인가할 경우 1시간 내에 완전한 박막을 이루었다. 표면 거칠기는 바이어스를 인가한 경우가 그렇지 않은 경우에 비해서 조금 높은 것으로 나타났다. 이러한 바이어스 효과는 표면에서의 핵생성 밀도 증가와 재핵생성 속도 증가에 기인하는 것으로 해석된다.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1571-1573
• /
• 2003

Diamond films including nanocystalline and graphite phase are grown by microwave plasma chemical vapor deposition using $N_2$ additives and negative substrate bias at growth step. The microstructure of the films is controlled by changing $N_2$ gas ratio and negative bias. Defects and grain boundaries between diamond and graphite are proposed to be crucial factors for forming the conducting path of electron emissions. The effect of growth parameters on the film microstructure are investigated by Raman spectroscopy and scanning electron microscopy(SEM). Electron emission characteristics are also examined in terms of the film growth conditions.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.238-240
• /
• 2017

Balun using a coaxial lines i often used in microwave circuits due to easy fabrication, high operating power, and stable operation. However, it is difficult to predict an accurate balun operation characteristic due to the parasitic reactance component to be generated when the coaxial line is connected to the microstrip line existing on the substrate, and the inductance and the capacitance component of the coaxial line itself. In this paper, it is measured the phase characteristics at two output ports of the coaxial line balun which should have opposite phase characteristics. Based on these results, it will examine closely the feasibility of making more improved coaxial line balun.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.3
• /
• pp.229-233
• /
• 2011

Diamond thin films were deposited on pretreated Co cemented tungsten carbide (WC-6%Co) inserts as substrate by microwave plasma chemical vapor deposition (MPCVD) system, equipped with a 915MHz, 30kW generator for generating a large-size plasma. The substrates were pretreated with two solutions Murakami solution $[KOH:K_3Fe(CN)_6:H_2O]$ and nitric solution $[HNO_3:H_2O]$ to etch, WC and Co at cemented carbide substrates, respectively. The deposition experiments were performed at an input power of 10 kW and in a total pressure of 100 torr. The influence of various $CH_4$ contents on the crystallinity and morphology of the diamond films deposited in MPCVD was investigated using scanning electron microscopy (SEM) and Raman spectroscopy. The diamond film synthesized by the $CH_4$ plasma shows a triangle-faceted (111) diamond. As $CH_4$ contents was increased, the thickness of diamond films increased and the faceted planes disappeared. Finally, Faceted diamond changed into nano-crystalline diamond with random crystallinity.

• Korean Journal of Materials Research
• /
• v.6 no.11
• /
• pp.1113-1120
• /
• 1996

다이아몬드 박막을 이용한 반도체소자를 실현시키기 위해서는 다이아몬드가 아닌 다른 재료의 기판위에 대면적에 걸쳐 다이아몬드막을 에피텍셜 성장시키는 것이 필수적이다. 그러나 이 분야의 연구는 아직 초보상태로 그 목표가 실현되지 못하고 있다. 본 논문에서는 저압의 ECR 마이크로파 플라즈마 CVD에 의하여 대면적의 Si(100)기판상에 방향성을 갖는 다이아몬드막을 성공적으로 성장시킨 결과를 보고자한다. 지금까지 얻어진 최적 핵생성 공정조건은 다음과 같다 : 반응압력 10Pa, 기판온도 80$0^{\circ}C$(마이크로파 전력이 3kW일 때), 원료가스 CH4/He 계로 농도비 3%/97%, 가스총유량 100sccm, 바이어스 전압 + 30V, 마이크로파 전력(microwave power)4kW, 바이어스 처리 시간 10분간이며, 성장단계에서의 증착공정 조건은 기판온도 80$0^{\circ}C$, 원료가스 CH4/CO2/H2계로 농도비 5%/15%/85%, 가스 총유량 1000sccm, 바이어스 전압 +30V, 마이크로파 전력 5kW, 성막시간 2시간으로 일정하게 유지하였다. 이 조건하에서 기판 면적 3x4$\textrm{cm}^2$의 대면적에 대해서 약 2x109cm-2의핵생성 밀도를 균일하게 재현성있게 얻었다. 원료가스로 CH4/H2를 사용한 경우보다 CH4/H2를 사용할 경우에 라디칼밀도의 증가에 의하여 더 높은 핵생성밀도를 얻을 수 있었다. 또한 저압의 ECR플라즈마 CVD의 경우에는 양의 바이어스전압이 막의 손상이 없어 다이아몬드 핵생성에 더 적합하였다.

• Korean Journal of Materials Research
• /
• v.18 no.4
• /
• pp.169-174
• /
• 2008

The structural and electrical properties of amorphous $BaSm_2Ti_4O_{12}$ (BSmT) films on a $TiN/SiO_2/Si$ substrate deposited using a RF magnetron sputtering method were investigated. The deposition of BSmT films was carried out at $300^{\circ}C$ in a mixed oxygen and argon ($O_2$ : Ar = 1 : 4) atmosphere with a total pressure of 8.0 mTorr. In particular, a 45 nm-thick amorphous BSmT film exhibited a high capacitance density and low dissipation factor of $7.60\;fF/{\mu}m2$ and 1.3%, respectively, with a dielectric constant of 38 at 100 kHz. Its capacitance showed very little change, even in GHz ranges from 1.0 GHz to 6.0 GHz. The quality factor of the BSmT film was as high as 67 at 6 GHz. The leakage current density of the BSmT film was also very low, at approximately $5.11\;nA/cm^2$ at 2 V; its conduction mechanism was explained by the the Poole-Frenkel emission. The quadratic voltage coefficient of capacitance of the BSmT film was approximately $698\;ppm/V^2$, which is higher than the required value (<$100\;ppm/V^2$) for RF application. This could be reduced by improving the process condition. The temperature coefficient of capacitance of the film was low at nearly $296\;ppm/^{\circ}C$ at 100 kHz. Therefore, amorphous BSmT grown on a TiN substrate is a viable candidate material for a metal-insulator-metal capacitor.