• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.4
• /
• pp.651-658
• /
• 2001

A novel multi-section power divider configuration is proposed to obtain wide-band frequency performance up to microwave frequency region. Design procedures for the proposed microwave broadband power divider are composed of a planar multi-section three-ports hybrid and a waveguide transformer design procedures. The multi-section power divider is based on design theory of the optimum quarter-wave transformer. Furthermore, in order to obtain the broadband isolation performance between the two adjacent output ports, the odd mode equivalent circuit should be matched by using the lossy element such as resistor. The derived design formula for calculating these odd mode matching elements is based on the singly terminated filter design theory. The waveguide transformer section is designed to suppress the propagation of the higher order modes such as waveguide modes due to employing the metallic electric wall. Thus, each section of the designed waveguide transformer should be operated with evanescent mode over the whole design frequency band of the proposed microwave broadband power divider. This paper presents several simulations and experimental results of multi-section power divider to show validity of the proposed microwave broadband power divider configuration. Simulation and experiment show excellent performance of multi section power divider.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.4
• /
• pp.498-505
• /
• 1999

The ferrite device that has nonreciprocal characteristics has been used as various microwave components. In this paper, the spectral-domain method was used to analyze the characteristics of structure(strip line on multilayer structure with ferrite material) for which no paper has been published yet. It is assumed that an external dc magnetic field is applied perpendicular to the ground conductor. The propagation constant is calculated for each parameter and frequency. Also we considered convergence by increasing the number of basis functions and verified the numerical analysis results. From the results, we could confirm that as the thicknesses of YIG is increased, the cutoff region is widened and the propagation constant is decreased at the frequency of upper cutoff region. For a larger applied dc magnetic field, the frequency of cutoff region is found to be increased. Also the simulation results for strip line show that the cutoff region is widened and the propagation constant is larger than that of microstrip line.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.12A
• /
• pp.1974-1984
• /
• 1999

In this paper, we introduce a highly efficient data structure that effectively captures the multipath phenomenon needed for accurate propagation modeling and fast propagation prediction. The proposed object representation procedure is called 'circular representation (CR)' of microwave masking objects such as buildings, to improve over the conventional vector representation (VR) form in fast ray tracing. The proposed CR encapsulates a building with a circle represented by a center point and radius. In this configuration, the CR essentially functions as the basic building block for higher geometric structures, enhancing the efficiency more than when VR is used alone. The simulation results indicate that the proposed CR scheme reduces the computational load proportionally to the number of potential scattering objects while its hierarchical structure achieves about 50% of computational load reduction in the hierarchical octree structure.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.6 no.1
• /
• pp.51-57
• /
• 1981

Carriers moving in a semiconductor can impart gain or loss to an acousic wave traveling through Piezo-electric materials. In this paper, surface a coustic wave amplifiers, which employ the interaction between carriers drifting in a semiconduct or film and electic fields accompanying a Rayleigh wave propagating on a Piezoelectric substrate, are described. The effect of various electromagnetic boundary condition on th propagation of surface waves in Piezoelectrics is considered. An expression for the dependence of surface wave velocity on electic boundary conditions is derived. Calculations show that, for properly prepared material, significant amplification is expected up to the microwave frequencies. At high frequencies, gain is reduced because electro diffusion smooths out the electron bucning necessary for amplification.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1993.10b
• /
• pp.53-64
• /
• 1993

This study aims to measure the reflection loss and the material constants of the fabricated samples for electromagnectic wave absorber precisely and easily by using 20mm$\Phi$coaxial tube with the end-short-type. The authors have estabilished the extraction algorithm of material constants by one port method and proved that the results of the experiments coincided with the calculated ones. On the basis of the above results the validity of the proposed measuring method is confirmed. This measurement method could be used effectively for the design of microwave absorbe and for its evaluation.

• Journal of the Korean Ceramic Society
• /
• v.37 no.6
• /
• pp.569-575
• /
• 2000

Fabrication of carbon fiber reinforced composites was carried out by hand lay-up method. Carbon nanofibers and SiC nanofibers were used as filler in the composites fabrication. Carbon nanofibers, one of the new carbon materials, have 5∼500 nm in diameter and 5-10 nm in length. SiC nanofibers were modified by silicon monoxide vapor with carbon nanofibers. The composites were carbonized at 1000$^{\circ}C$ in a nitrogen atmosphere, and then densified by molten pitches impregnated in vacuum. Multiple cycles of liquid pitch impregnation and carbonization were carried out to obtain a desired density. The composites were characterized by density, microstructure. The inter-laminar shear strength (ILSS) test was performed for mechanical properties. For the new application, the microwave reflective proeprty of composites was investigated. Dielectric constant and permeability spectrum were measured in 12∼18 GHz frequency ranges. On the basis of the wave propagation theory in a lossy media, the reflection loss from the composite inter-layer was predict as a function of frequency.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.6
• /
• pp.71-78
• /
• 1999

In this paper, a new model for optical phase-locked loop(OPLL) is proposed that includes VCO laser frequency response as well as loop propagation delay. It is found that both of them greatly affect the OPLL performance. Our model can be used for realizing high-performance microwave-range OPLL.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.242-242
• /
• 1999

상대론적 전자빔 발생장치(300kV, 40kA, 60ns)를 통하여 발생하는 전자빔은 진공 중에서 공간전하한계전류값을 갖게 되어 진행이 어렵다. 이런 전자빔의 전파특성을 향상시키기 위하여 여러 가지 방법들이 실험되어졌다. 본 실험실에서 수행한 실험은 전자빔의 진행해나가는 도파관 속에 국부적인 plasma channel을 형성시키고 이에 따른 전자빔의 전파율의 향상을 유도하였다. 이때 형성되는 높은 에너지의 이온빔을 관찰하고 이온 전류밀도에 따른 전자빔의 수송효율사이의 관계를 관찰하였다. 전류밀도의 증가는 여러 가지로 응용 될 수 있다. 자유전자레이저(Free Electron Laser)는 microwave로부터 가시광선 영역을 포함해 X-ray 영역까지의 coherent radiation을 발생시킬 수 있는 개념의 장치이다. 이 장치에서 전자빔의 전류밀도는 출력되는 전자기파의 power와 직접적으로 관계하여 고출력 microwave 발생장치를 구성할 수 있다. 이번 실험에서는 일정한 국부적으로 형성된 plasma에 따른 강렬한 상대론적 전자빔의 전파효율의 향상을 관찰하였다.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.4
• /
• pp.7-13
• /
• 1992

Diffraction loss occurs when the propagation path is obstructed by mountains and hills between a base station antenna and a moving vehicle antenna in mobile-radio communication. In this paper an approximate mathematical model using Fresnel-Kirchhoff diffraction theory is considered to predict propogation attenuation by natural obstacles with lateral profiles having general shapes. Field tests are conducted using helical and crossed drooping dipole antenna at 820 MHz. The theoretical analysis used in estimating the effects of hills agrees reasonably with experimental data. The results seem to be useful for estimating the level of received power, the minimum allowable input power, the optimum site of base station and consequently, planning terrestrial microwave links.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.53-55
• /
• 2013

In general, various numerical techniques such as MoM, TLM, FEM, and BEM can be introduced to analyze some microwave device and electromagnetic propagation problems. Numerical simulator based on Java thread-level parallelism for improving computation performance is implemented and estimated.