• 생약학회지
• /
• 제21권4호
• /
• pp.284-289
• /
• 1990

Crude Aconiti Tubers were irradiated with microwave for 5 or 10 min with or without $NaHCO_3$. Ten min-irradiation reduced the contents of aconitine and mesaconitine to the level of those of commercially available processed Aconiti tuber power which is prepared with the high pressure-high temperature technique. The contents of benzoylaconine of the 10 min-irradiated Aconiti tubers were also comparable to those of commerciallized processed Aconiti tuber powder. However, irradiation with 1% $NaHCO_3$ soln. resulted in the drastic reduction of all the three above alkaloids.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.281-282
• /
• 2007

$Mg_4Nb_2O_9$ (MN) ceramics have been prepared by a sol-gel method. The powder characteristics, phase evolution, and microwave dielectric properties of the MN were investigated in various processing conditions such as sol-gel compositions, calcination, and sintering temperatures. A Qxfo value of 111,717 GHz with a ${\varepsilon}_r$ of 10.59 and a ${\tau}_f$ of $+1.736\;ppm/^{\circ}C$ was obtained after sintering at $1300^{\circ}C$ for 5 h.

• 전기학회논문지
• /
• 제64권3호
• /
• pp.422-428
• /
• 2015

A 2.45GHz microwave plasma source with a linear antenna has been developed for low temperature large scale deposition processing. Microwave power is transmitted through WR340 waveguide and a copper rod, linear antenna, is located in a quartz tube. The power matching is effectively achieved by a linear antenna is located at ${\lambda}_g/4$ or $3{\lambda}_g/4$ from the end of WR340 waveguide. The Ar plasma was generated along the surface of quartz tube and a clear standing wave pattern with nearly 10cm wavelength was observed at Ar pressure of 200mTorr and 200W input power. The electron density and electron temperature were investigated by using the electrostatic probe. The electron density and electron temperature were highly measured near the surface of quartz tube. Ar plasma density along the quartz tube is mostly uniform despite standing wave set-up and antenna of long length. A uniform temperature was measured at 10~40cm distance from the end quartz tube and 5cm distance from the surface of quartz tube.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.662-665
• /
• 2002

The microwave dielectric properties and the microstructures of $Tm_2O_3$-modified $BiNbO_4$ ceramics were investigated. $Bi_{(1-x)}Tm_xNbO_4$ ceramics combined with orthorhombic and triclinic phases were identified at sintering temperatures of $920{\sim}960^{\circ}C$. The apparent density decreased slightly with the increasing Tm content. Regardless of the Tm content the dielectric constant $(\varepsilon_r)$ of all compositions except x=0.1 in $Bi_{(1-x)}Tm_xNbO_4$ ceramics saturated at the range of 42~44. The $Q{\times}f_0$ values of 6,000-12,000(GHz) were obtained for all compositions when the sintering temperatures were in the range of $920{\sim}960^{\circ}C$. The temperature coefficient of the resonant frequency$(\tau_f)$ can be also adjusted with increasing the amount of the doped Tm from a positive value of $+15ppm/^{\circ}C$ to a negative value of $-20ppm/^{\circ}C$. The $Bi_{(1-x)}Tm_xNbO_4$ ceramics can be possibly applied to multilayer microwave devices with low processing temperatures.

• 천문학회지
• /
• 제38권4호
• /
• pp.445-462
• /
• 2005

In a companion paper, we have presented so-called Spatio-Spectral Maximum Entropy Method (SSMEM) particularly designed for Fourier-Transform imaging over a wide spectral range. The SSMEM allows simultaneous acquisition of both spectral and spatial information and we consider it most suitable for imaging spectroscopy of solar microwave emission. In this paper, we run the SSMEM for a realistic model of solar microwave radiation and a model array resembling the Owens Valley Solar Array in order to identify and resolve possible issues in the application of the SSMEM to solar microwave imaging spectroscopy. We mainly concern ourselves with issues as to how the frequency dependent noise in the data and frequency-dependent variations of source size and background flux will affect the result of imaging spectroscopy under the SSMEM. We also test the capability of the SSMEM against other conventional techniques, CLEAN and MEM.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.220-223
• /
• 2005

We studied the effect of composition, processing, and sintering temperature on the microwave properties of $Mg_{3-x}Co_x(VO_4)_2$ system which is applicable to LTCC. When $Mg_{3-x}Co_x(VO_4)_2$ was fabricated by solid-state reaction process and sintered at the temperature range of $800\sim910^{\circ}C$, it was found that the optimum composition of x was 2 at which microwave properties of 910$^{\circ}C$-sintered one were as follows: $Q\times f_0\sim55,200GHz$ and $\varepsilon_r\sim10$. When $(MgCo_2)(VO_4)_2$ was fabricated by sol-gel process and sintered at 800$^{\circ}C$, $Q\timesf_0$was 34,400GHz which is much high compared to those fabricated by solid-state reaction process at the same sintering temperature.

• 한국표면공학회지
• /
• 제45권2호
• /
• pp.89-94
• /
• 2012

A study to replace a high temperature thermal carbonization process with microwave plasma process is carried for PAN fiber as a starting material. Near atmospheric pressure microwave plasma (1 Torr~45 Torr) was used to control to get the fiber temperature up to $1,000^{\circ}C$. Even argon is an inert gas, its plasma state include high internal energy particles; ion (15.76 eV) and metastable (11.52 eV). They are very effective to lower the necessary thermal temperature for carbonization of PAN fiber and the resultant thermal budget. The carbonization process was confirmed by both EDS (energy dispersive spectroscopy) of plasma treated fibers and OES (optical emission spectroscopy) during processing step as a real time monitoring tool. The same trend of decreasing oxygen content was observed in both diagnostic methods.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.288-289
• /
• 2006

We studied the effect of sol-gel processing and sintering temperature on the microwave properties of $MgCo_2(VO_4)_2$ system(MCV) which is applicable to LTCC(low-temperature cofired ceramics). The MCV was synthesized by sol-gel process using solution that contains precursor molecules for Mg, Co, and V. SEM analysis shows that the average particle size is ${\sim}1{\mu}m$ and size distribution is very uniform compared to the one prepared by conventional solid-state reaction process. Highly dense samples were obtained at the sintering temperature range of $750^{\circ}C{\sim}930^{\circ}C$. The maximum $Q{\times}f_0$ value of 55,700GHz, dielectric constant(${\varepsilon}_r$) of 10.41 and temperature coefficient(${\tau}_f$) of $-85ppm/^{\circ}C$ was obtained at the sintering temperature of $930^{\circ}C$. The superior microwave properties of sol-gel processed MCV relative to conventional solid-state reaction processed one is remarkable especially at lower sintering temperatures such as $750^{\circ}C$ and $800^{\circ}C$.

• 한국식품과학회지
• /
• 제32권2호
• /
• pp.323-327
• /
• 2000

인삼가공제품의 원료로 사용되는 가용성 인삼성분의 신속한 추출방법을 개발하기 위한 기초연구로서, 기존 추출 방법들에 비해 환경친화적이고 경제적인 장점이 알려진 마이크로웨이브(2450MHz)의 추출조건을 조사하였다. 가용성 인삼성분의 추출에서 백미삼 원료의 입자크기는 60 mesh, 시료 대 용매비는 1 : 10(g/mL)이 각각 적당하였고, 마이크로웨이브 에너지는 100 W 이하에서 인삼성분의 추출이 용이하였다. 가용성 성분의 수율은 60% 에탄올을 용매로 하여 5분간 1회 추출시 약 83%, 5회 반복 추출시에는 사포닌 성분을 포함한 대부분의 가용성 성분을 추출할 수 있었다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제17권1호
• /
• pp.8-12
• /
• 2012

This study is maintains the condition of high temperature (above $600^{\circ}C$) within a short time using on microwave and high temperature heating elements. And removal characteristics according to changes in soil moisture, microwave power and temperature through the decomposition of the contaminated soil by oil. The difficulty resolvability material was sort of lubricating oil having long carbocyclic (C18-C50) and TPH removal rate reached 85.2% at 6 kW and $700^{\circ}C$ and thus the contaminant was removed 1,788 mg/kg within a process time of 40 minutes. In the case of light oil, gasoline contaminated soil, the removal amount showed 567 mg/kg and the treatment rate reached 98.4% at 6 kW, $500^{\circ}C$ and 20 minute. In the case of non-resolvability reached TPH concentrations on 2,000 mg/kg of worrisome level of soil contamination in the 3 zones at 6 kW, $700^{\circ}C$ and 30 minute. At the time, showed up processing costs 8,173 won per ton.