• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.12
• /
• pp.89-94
• /
• 2012

In this paper, a UHF cavity-backed spiral antenna for partial discharge diagnosis is proposed. The proposed antenna consists of two-arm Archimedean spiral, a cavity, and a balun for feeding. The spiral antenna is designed for 0.3-1.5 GHz operating frequency. Two spiral arms of the proposed antenna are fed by a microstrip tapered-balun. In order to enhance the gain, the cavity is located in the back side of the spiral pattern. The proposed antenna is designed and simulated using CST Microwave Studio. The designed antenna is also fabricated and tested to validate performance. The measured radiation patterns are directional to the +z-axis and measured peak gain is 9.92 dBi.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.20-23
• /
• 2001

Plasma Display Panel(PDP) is a type of flat panel display utilizing the light emission produced by gas discharge. Barrier Ribs of PDP separating each sub-pixel prevents optical and electrical crosstalks from adjacent sub-pixels. The mold for forming the barrier ribs has been newly researched to overcome the disadvantages of conventional manufacturing processes such as screen printing, sand-blasting and photosensitive glass methods. The mold for PDP barrier ribs have stripes of micro grooves transferring glass-material wall. In this paper, Stripes of grooves of which width 48${\mu}{\textrm}{m}$, depth 124$\mu\textrm{m}$ , pitch 274$\mu\textrm{m}$ was acquired by machining of single crystal silicon with dicing saw blade. Maximum roughness of the bottom of the grooves was 59.6nm Ra in grooving Si. Barrier ribs were formed with silicone rubber mold, which is transferred from grooved Si forming hard mold. Silicone rubber mold has the elasticity, which enable to accommodate the waveness of lower glass plate of PDP. The methods assisted by the microwave and UV was adopted for reducing the forming time of glass paste.

• Korean Journal of Ecology and Environment
• /
• v.47 no.3
• /
• pp.225-231
• /
• 2014

Discharge measurement during flood season is very difficult. Microwave water surface current meter (MWSCM) can measures river surface velocities easily without contacting water. This study introduces its improved version, MWSCM for general use. The existing version of MWSCM is for floods so that its applicable period in a year is short. It has been improved to extend its applicability in a year. The range of measurable velocity for MWSCM for general use is extended so it can be applied during normal flows as well as high flows. MWSCM for general use can measure the velocity range of $0.03{\sim}20.0ms^{-1}$, whereas MWSCM for floods can measure the velocity range of $0.5{\sim}10.0ms^{-1}$. To make such innovation of MWSCM for general use, the applied microwave frequency of MWSCM was changed from 10 GHz to 24 GHz. Waveguide slot array antenna has been designed with the new development of the circuit of transmitting and receiving part. Improvement requests on the existing MWSCM for floods - weight lightening, measured velocity stabilization, self-test, low power consumption, and waterproof and dampproof - from the users of it have been reflected for the development of the new version of MWSCM.

• Journal of Korea Water Resources Association
• /
• v.48 no.8
• /
• pp.613-623
• /
• 2015

To overcome the difficulties of discharge measurements during flood season, MWSCM(micowave water surface current meter) which measures river surface velocities without contacting water has been applied in field work since its development. The existing version of MWSCM is for floods so that its applicability is low due to the short periods of floods. Therefore the renovative redesign of MWSCM to increase the applicability was conducted so that it can be applied to the discharge measurements during normal flows as well as flood ones by extending the measurable range of velocity. A newly developed high-performance MWSCM for general use can measure the velocity range of 0.03-20.0 m/s from flood flows to normal flows, whereas MWSCM for floods can measure the velocity range of 0.5-10.0 m/s. The improvement of antenna isolation between transmitter and receiver to block the inflow of transmitted singals to receiver and the improvement of phase noise of oscillator are necessary for detecting low velocity with MWSCM technology. Separate type antenna of transmitting and receiving signals is developed for isolation enhancement and phase locked loop synthesizer as an oscillator is applied to high-performance MWSCM for general use. Microwave frequency of 24 GHz is applied to the new MWSCM rather than 10 GHz to make the new MWSCM small and light for convenient use of it at fields. Improvement requests on MWSCM for floods-stable velocity measurement, self test, low power consumtion, and waterproof and dampproof-from the users of it has been reflected on the development of the new version of MWSCM.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.182.2-182.2
• /
• 2016

Hollow cathode discharge(중공 음극)는 음극 표면에서 발생되는 2차 전자를 이용하여 높은 밀도의 플라즈마를 만들 수 있는 장점이 있다. 전원으로 microwave, RF, DC, pulsed dc등을 사용할 수 있으며 박막의 증착, 식각 등에 응용 가능하다. 물리적 현상으로는 중공 음극 재료 표면 물질의 가열 및 이온 스퍼터링, 2차 전자의 가열, 자기장 인가 구조의 경우 전자 거동이 있다. PIC(particle-in-cell)방식의 모델링과 fluid model을 이용한 방법이 있는데 본 연구에서는 상용 fluid model software인 ESI사의 CFD-ACE+를 사용하여 모델링 하였다. 구동 주파수는 13.56 MHz의 상용 고주파 전원과 보다 낮은 1 MHz, 100 kHz의 수치 모델을 이용하여 HF, MF, LF 영역에서의 동작 특성을 해석하였다. 1차적으로는 가스 유동의 특성을 2D, 3D로 조사하였고 플라즈마 거동은 2차원을 주로 진행하였으며 계산 시간이 오래 거리는 3차원 모델을 하나 만들어 그 특성을 조사하였다.

• The Korean Journal of Ceramics
• /
• v.2 no.4
• /
• pp.212-215
• /
• 1996

This paper focuses the strength and wear resistance of CVD diamond films. The strength of free-standing CVD diamond films synthesized by microwave plasm CVD, DC plasma CVD, RF plasma CVD and arc discharge plasma jet CVD has been measured by three-point bending test. The wear resistance of CVD diamod films has been evaluated by the pin-on-disk type testing. diamond films coated on the base of sintered tungsten carbide pin by hot filament CVD have been rubbed with a sintered diamond disk in muddy water. Volume removed wear of CVD diamond has been compared with stellite, WC alloy and bearing steel.

• Proceedings of the KIEE Conference
• /
• 2003.10a
• /
• pp.75-77
• /
• 2003

마이크로파 방전을 이용한 고효율 고출력광원으로 연구 개발되고 있는 2-분자 발광체의 고압증기 플라즈마는 그 특성이 충분히 이해되지 않고 있다. 본 논문은 특유한 물리적 성질을 보이는 2-원자 황분자 증기 플라즈마의 물리적 성질과 광학적 특성에 관하여 총체적인 고찰을 할 것이다. 특히 고압 발광 플라즈마의 마이크로파 흡수 메카니즘 플라즈마 전도율, 및 발광 특성에 관하여 논의 할 것이다.

• ETRI Journal
• /
• v.17 no.2
• /
• pp.11-19
• /
• 1995

The plasma densities generated from a semiconductor bridge (SCB) device employing a capacitor discharge firing set have been measured by a novel diagnostic technique employing a microwave resonator probe. The spatial resolution of the probe is comparable to the separation between the two wires of the transmission lines (${\approx}$3 mm). This method is superior to Langmuir probes in this application because Langmuir probe measurements are affected by sheath effects, small bridge area, and unknown fraction of multiple ions. Measured electron densities are related to the land material and input energy. Although electron densities in the plasma generated by aluminum or tungsten-land SCB devices show a general tendency to increase steadily with power, at the higher energies, the electron densities generated from tungsten-land SCB devices are found to remain constant.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.140-140
• /
• 2013

This presentation will describe recent developement in spatially and time resolved optical diagnostics for two kinds of the high pressure microdischarges. The first kind is a nanosecond pulsed discharge with two pin electrodes while the second kind is a microwave split ring resonator developed by Jeff Hopwood. Both spatially and time resolved optical emissions are collected for these two discharges and some interesting phenomena are observed. By using either the Stark broadening or a collisional radiative model for high pressure discharges, the evolution of electron density can be obtained. We will compare these different techniques for obtaining the electron density and discuss their limitations.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.11
• /
• pp.724-729
• /
• 1999

We developed the correlated color temperature (CCT) control technique for electrodeless sulfur lamp (ESL) by adding a few milligrams of NaI into sulfur discharge bulb. Nal produces intense Na D-line that changes the CCT of the ESL. We can adjustthe CCT in the range of 8,400 K to 3,600 K. Color rendering index can be maintained between 79 and 90 for the adjustable range of the CCT. the NaI helps the ESL dischargeable at below 0.5 kW of forward microwave power into the bulb. We have shown that this technique did not cause reduction of luminance compared to electrodeless elemental sulfur lamp.