• 한국환경과학회지
• /
• 제15권6호
• /
• pp.579-586
• /
• 2006

The purposes of this paper were to monitor the temperature rising courses and spark discharge of the modified granular activated carbon (GAC) by microwave (MW) irradiation and to evaluate absorption of benzene. The GAC coated on $SiO_2$, boron, talc, ferrite was named as the modified GAC. Thermal and spark discharge measurement of virgin GAC and modifed GAC has been carried out using a MW device operating at 2450 MHz under various energy conditions. The results of this paper as follows. First, the modified GAC is more efficient than the virgin GAC in temperature control. Temperature gradient of the modified GAC is more lower than that of virgin GAC. The temperature gradient of GAC was observed in the following order : virgin GAC, Mn-Zn ferrite/GAC, Ni-Zn ferrite,/GAC, $SiO_2/GAC$, Boron/GAC, Talc/GAC. Second, the spark discharge of the modified GAC was diminished, compared with that of virgin GAC. Because of its excellent electrical insulating properties, the coating material prevents the spark discharge. Finally, the benzene adsorption capacity of the modified GAC decreased due to diminishing of adsorption site by the coating material. Considering the temperature gradient and spark discharge of GAC, the GAC coated $SiO_2$ would be appropriate absorbent under irradiation of MW.

• 한국융합학회논문지
• /
• 제11권10호
• /
• pp.63-69
• /
• 2020

본 논문에서는 저속으로 불규칙하게 움직이는 인체의 심박신호를 감지하기 할 수 있어 웨어러블 디바이스에 적용 가능한 소형 마이크로파 센서를 제안하였다. 이를 위해 2.4 GHz ISM 대역에서 평형 구조를 갖는 마이크로스트립 방사 패치들과 자체발진 검출회로 및 귀환회로가 구성되었다. 이론 전개와 시뮬레이션을 통해 제안된 구조의 타당성을 확인하였고 제작된 시제품을 측정하였다. 회로의 보드는 65mm × 85㎟의 작은 크기이며, 간단한 고주파 회로구조로 60mW 수준의 작은 전력을 소모한다. 센서와 직선거리 2~30mm, 측면 좌우 거리 ±20mm 범위 내에서 저속(0.5Hz)으로 움직이는 인체로부터 심박신호를 얻을 수 있었다.

• Journal of Biosystems Engineering
• /
• 제39권4호
• /
• pp.304-309
• /
• 2014

Purpose: Weeds cause significant losses in agricultural production. In this study, we investigated the effect of microwaves on the germination rates of cress and arugula seeds to determine whether microwaves could be developed as an effective alternative to conventional chemical-based herbicides. Methods: Seeds were planted at equal depths (8-10 mm) in a soil-turf mixture, and seeds were exposed to microwaves for 126 s, 70 s, and 50 s in a device constructed specifically for this study. A microwave tunnel was built using a variable speed conveyor belt and 4 magnetrons with a combined output power of 2.8 kW. Seeds that were not exposed to microwaves were germinated with regulated irrigation, temperature, and humidity controls in parallel with the treated seeds, and the germination rates were compared among the treatment groups. Results: We found that the exposure of cress and arugula seeds to microwaves for 126 s inhibited germination close to 100%. Cress seeds treated with microwaves for 50 s showed 95% germination compared to 65% germination of the untreated cress seeds. Conclusions: We predict that the thermal effect of microwave energy affects the germination ratio and germination rate of seeds.

• 한국정보통신학회논문지
• /
• 제6권2호
• /
• pp.151-158
• /
• 2002

본 논문에서는 저 위상잡음과 고안정 특성을 나타내는 디지털 MMDS용 위상고정 발진기를 설계하였으며 전압제어 발진기용 능동소자의 비선형 등가모델에 의하여 저 위상잡음 파라미터와 안정된 전압제어 발진기의 필요충분 조건을 분석하였다. 설계된 전압제어 발진기에 위상고정루프를 적용하여 위상고정 마이크로파 발진기를 구현하였으며 고안정 전압제어 발진기에 대하여 시뮬레이션한 결과 －90dBc/Hz @ 10KHz의 위상잡음을 보였으며 위상고정 마이크로파 발진기에 대한 실험 결과 －85dBc/Hz @ 10KHz의 위상잡음을 얻었다. 고안정도와 저 위상잡음특성을 나타내는 위상고정 마이크로파 발진기의 설계모델을 디지털 MMDS 단말기용 고안정 주파수 합성기로 응용할 수 있음을 보였다.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 학술대회 논문집
• /
• pp.287-290
• /
• 2003

For microwave device applications, c-axis oriented high temperature superconducting YBa$_2$Cu$_3$O$_{7-{\delta}}$ (HTS-YBCO) epitaxial thin films on the r-cut sapphire substrate(Al$_2$O$_3$) were prepared. In order to reduce the lattice mismatch with a substrate and to enhance the crystallity of HTS thin films, CeO$_2$ buffer layer on the r-cut sapphire substrate was grown by the RF-magnetron sputtering. The YBCO films on the CeO$_2$ buffer layer were deposited using the pulsed-laser deposition (PLD) method. These HTS YBCO /CeO$_2$/Al$_2$O$_3$ multilayer thin films(30 $\times$ 30 mm$^2$) routinely exhibited a critical temperature(T$_{c}$) of 89 K from the R-T measurement. Using HTS YBCO/CeO$_2$ /Al$_2$O$_3$ multilayer thin film. We fabricated and characterized the microwave passive devices (planar type filters) with cryopack-age such as the coupled -line type low-pass filter (LPF) and the open-loop meander type bandpass filter (BPF).filter (BPF).).

• 대기
• /
• 제32권4호
• /
• pp.263-276
• /
• 2022

The observation error of satellite radiation data that assimilated into the Korean Integrated Model (KIM) was diagnosed by applying the Hollingsworth and Lönnberg and Desrozier techniques commonly used. The magnitude and correlation of the observation error, and the degree of contribution for the satellite radiance data were calculated. The observation errors of the similar device, such as Advanced Technology Microwave Sounder (ATMS) and Advanced Microwave Sounding Unit-A shows different characteristics. The model resolution accounts for only 1% of the observation error, and seasonal variation is not significant factor, either. The observation error used in the KIM is amplified by 3-8 times compared to the diagnosed value or standard deviation of first-guess departures. The new inflation value was calculated based on the correlation between channels and the ratio of background error and observation error. As a result of performing the model sensitivity evaluation by applying the newly inflated observation error of ATMS, the error of temperature and water vapor analysis field were decreased. And temperature and water vapor forecast field have been significantly improved, so the accuracy of precipitation prediction has also been increased by 1.7% on average in Asia especially.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 춘계학술대회 논문집
• /
• pp.26-30
• /
• 1995

We describe the preparation and characterization of epitaxial thin films made with high temperature superconductor, $YBa_2Cu_3O_{7-\delta}$. The influence of processing parameters for YBCO thin films on MgO substrates in-situ grown by the pulsed laser deposition, including parameters of a laser beam energy, oxygen pressure, substrate temperature, target-substrate dis-tance is discussed. The characteristics of YBCO thin films were analyzed by using XRD, R-T measurement, AFM, crosssectional TEM, and RBS. For examples of microwave device applications, The fabrication and characterization of the microstrip lowpass filter and bandpass filter are also presented.

• 전기학회논문지
• /
• 제60권9호
• /
• pp.1727-1732
• /
• 2011

In order to realize a high performance(low loss, high isolation) microwave power divider/combiner, we have designed the power combiner/divider precisely in accordance with the different hight of central part. In the case of the high central part of the hight of $h_r$=10.2, a compensating part of the conical line is inserted in the conical conversion transmission line, and in the case of low central part of the hight of $h_r$=5.0, the conical conversion transmission line is remodeled into the 2-stage bend structure. In both case, the reflection characteristics are improved to 30dB over the operating frequency range of 5GHz bandwidth. A resistance is inserted between the peripheral ports so as to try to improve the isolation characteristics of the device. For the 16-divider/combiner, the isolation characteristics are improved to 10dB over the operating frequency range of 5GHz bandwidth.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제6권3호
• /
• pp.182-188
• /
• 2006

An artificial neural network model for the microwave characteristics of an InGaAs/InP hemt for 70 nm gate length has been developed. The small-signal microwave parameters have been evaluated to determine the transconductance and drain-conductance. We have further investigated the frequency characteristics of the device. The neural network training have been done using the three layer architecture using Levenberg-Marqaurdt Backpropagation algorithm. The results have been compared with the experimental data, which shows a close agreement and the validity of our proposed model.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.222.1-222.1
• /
• 2014

Flexible device 및 OLED 디스플레이 제조를 위한 산화물 반도체 보호막 증착 및 encapsulation 공정을 위해 균일한 대면적 플라즈마를 만들기 위한 다양한 연구가 진행되고 있다. 초고주파 플라즈마는 고밀도, 고효율의 플라즈마를 저진공에서 쉽게 생성시킬 수 있고 다양한 전력결합방법을 통해 대면적 확장성이 우수한 장점이 있다. 본 연구에서는 TEM 웨이브가이드로 파워가 전달되는 선형 초고주파 플라즈마 소스에 대한 2차원축대칭 유체 시뮬레이션을 수행하였다. Ar 가스 압력과 초고주파 입력전력이 증가함에 따라 전자밀도가 증가하였고 도파관 방향으로 플라즈마의 길이가 증가함이 관측되었다. Quartz Tube 표면 가까이에서 전자밀도가 가장 높게 나타났다. 전자의 에너지 손실 채널중 가장 많은 부분을 차지하는 것은 여기종 생성에 따른 에너지 손실이었으며 탄성 충돌에 의한 에너지 손실이 두 번째로 큰 부분을 차지하였다.