• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.288-291
• /
• 2002

An alkoxide-based sol-gel method was used to fabricate $(Pb_{x},Sr_{1-x})$TiO3 (PST) thin films on a Pt/Ti/SiO2/Si substrate, and the dielectric properties of the PST thin films were investigated as a function of the Pb/Sr composition for use in tunable microwave device applications. The dielectric properties of the PST films were strongly dependent on the Pb/Sr ratio. The dielectric constant and dielectric loss of the PST films increased with increasing Pb content, and the figure of merit (FOM) reached a maximum value of 27.5 at a Pb/Sr ratio of 4:6. The tunability increased with increasing Pb content. The dielectric constant, loss factor, and tunability of PST (50/50) thin films were 404, 0.023, and 51.73%, respectively. From the result, the PST films with good dielectric properties are useful candidates for tunable microwave device.

• Journal of information and communication convergence engineering
• /
• 제17권3호
• /
• pp.221-226
• /
• 2019

In this work, a transmitter/receiver front-end module (T/R FEM) with an automatic Tx/Rx switching scheme for a 2.4 GHz microwave power transfer is developed for a retro-reflective beamforming scheme. Recently, research on wireless power transfer techniques has moved to wireless charging systems for mobile devices. Retro-reflective beamforming is a good candidate for tracking the spatial position of a mobile device to be charged. In Tx mode, the T/R FEM generates a minimum of 1 W. It also comprises an amplitude and phase monitoring port for transmitting RF power. In Rx mode, it passes an Rx pilot signal from a mobile device to a digital baseband subsystem to recognize the position of the mobile device. The insertion loss of the Rx signal path is 4.5 dB. The Tx and Rx modes are automatically switched by detecting the Tx input power. This T/R FEM is a design example of T/R FEMs for wireless charging systems based on a retro-reflective beamforming scheme.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.373-373
• /
• 2014

Resistive-change random access memory (ReRAM) device is one of the promising candidates owing to its simple structure, high scalability potential and low power operation. Many resistive switching devices using transition metal oxides materials such as NiO, Al2O3, ZnO, HfO2, $TiO_2$, have attracting increased attention in recent years as the next-generation nonvolatile memory. Among various transition metal oxides materials, HfO2 has been adopted as the gate dielectric in advanced Si devices. For this reason, it is advantageous to develop an HfO2-based ReRAM devices to leverage its compatibility with Si. However, the annealing temperature of these high-k thin films for a suitable resistive memory switching is high, so there are several reports for low temperature process including microwave irradiation. In this paper, we demonstrate the bipolar resistive switching characteristics in the microwave irradiation annealing processed Ag/HfO2/Pt ReRAM device. Compared to the as-deposited Ag/HfO2/Pt device, highly improved uniformity of resistance values and operating voltage were obtained from the micro wave annealing processed HfO2 ReRAM device. In addition, a stable DC endurance (>100 cycles) and a high data retention (>104 sec) were achieved.

• 한국초전도ㆍ저온공학회논문지
• /
• 제19권4호
• /
• pp.18-21
• /
• 2017

We report a method for improving heat exchange between cryo-cooled large-power-dissipation devices and liquid cryogen. Micro-machined monolithic heat sinks were fabricated on a high integration density superconducting Josephson device, and studied for their effect on cooling the device. The monolithic heat sink showed a significant enhancement of cooling capability, which markedly improved the device operation under large dc- and microwave power dissipation. The detailed mechanism of the enhancement still needs further modeling and experiments in order to optimize the design of the heat sink.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2003년도 춘계총회 및 연구발표회 초록집
• /
• pp.173.2-173
• /
• 2003

• Journal of the Korean Wood Science and Technology
• /
• 제26권4호
• /
• pp.34-42
• /
• 1998

Three hardwood (ash, alder and black locust) and three softwood (Japanese red pine, radiata pine and Western hemlock) specimens were dried in microwave(MlW) oven and their drying rates were obtained. Their specific permeabilities were also measured by using a modified liquid permeability measuring device. The correlation between the M/W drying rates and permeabilities of six species were statistically analyzed. It was revealed that within a species there is a logarithmic relationship between the M/W drying rates and average moisture contents and that among species there is a linear relationship between the M/W maximum drying rates and the average specific permeabilities. A exception was Western hemlock, which was of low permeability and of high drying rate. A Me-time equation, which showed a good agreement with the actual data, was derived. Thus using this equation the moisture contents of wood and the drying end points of M/W drying could be predicted. Infrared images of the thermal distribution in wood were illustrated.

• 한국전자파학회논문지
• /
• 제14권7호
• /
• pp.699-704
• /
• 2003

레이다기법을 이용한 마이크로파 Reflectometry를 비균질 매질의 밀도 특성을 조사하기 위한 비파괴검사 장치로 응용하기 위한 시스템 특성을 연구하였다. 마이크로파 Reflectometry로 비균질 매질을 조사하기 위해서는 대상에 따른 시스템의 하드웨어 구성이 최적화되어야 하며, 각 시스템에서의 소신호 반응특성이 이해되어야만 전체적인 시스템 해법을 제공하는 것이 된다. 그 중에서 플라즈마 연구분야에 응용하기 시작한 것은 비교적 최근의 일로서 그 활용도가 점차 증가하고 있는 경향이다. 조사하는 대상의 특성에 따른 시스템의 구성을 이해하고, 파동수 및 밀도 섭동에 관한 시스템의 특성을 조사하기 위한 장치를 제안하며, 실험적 방법의 결과와 1차원 파동방정식을 이용한 수치해석적 결과를 비교 검증하였다.

• 한국세라믹학회지
• /
• 제35권11호
• /
• pp.1203-1211
• /
• 1998

적외선 광온도계(IR optical thermometer)와 PID 온도조절기에 의해 소성온도와 시간을 정밀하게 조절할 수 있는 마이크로파 소성장치를 사용하여 BaTiO3 시편을 소성하였다. 또한 마이크로파 소성중에 광섬유 온도계(optical fiber thermoneter)로 시편의 내부온도를 측정하여 같은 조건에서의 일반소성에 의한 시편과 소성특성을 비교한 결과, 소성시간에 따른 빠른 입성장속도과 큰 결정립경을 가졌으며, 온도에 따른 유전성질의 변화는 20~16$0^{\circ}C$의 측정범위에서 같은 경향을 보였다.

• 전기학회논문지
• /
• 제60권7호
• /
• pp.1385-1390
• /
• 2011

A coaxial-conical-radial transmission line conversion circuits have been investigated to realize a low loss high performance microwave power divider/combiner. In order to optimize the characteristics of the device, the power divider/combiner was designed separately with two parts-the inner part and the outer part. Utilizing the rectangular approximation of the outer part, we can design the low loss device which is not affected by the partition number N of the outer part. The small return loss which is lower than 20dB was obtained on the frequency range of 5.15GHz(7.45~12.60GHz). A conical connector was employed for smooth connection between the central coaxial line and the outer radial line. Making use of the $47^{\circ}$ and $90^{\circ}$ 2-stage conical connector, the return loss lower than 30dB was obtained on the operating frequency range of 5GHz. The total return loss of the designed divider/combiner was lower than 20dB on the frequency range of 5GHz for the partition number N=11, N=12 and N=16.

• 한국전자파학회논문지
• /
• 제19권5호
• /
• pp.556-561
• /
• 2008

시간 지연이나 위상 지연과 같은 레이다 기법을 기반으로 하는 마이크로파 reflectometry를 비균질 매질의 밀도 특성을 조사하기 위한 비파괴 검사 장치로 응용하기 위한 시스템 특성을 연구하였다. 특히 마이크로파 reflectometry를 플라즈마 연구 분야에 응용하기 시작한 것은 비교적 최근의 일로서 그 활용도가 점차 증가하고 있는데, 마이크로파 reflectometry로 비균질 매질을 조사하기 위해서는 대상에 따른 시스템의 하드웨어 구성이 최적화되어야 하며, 시스템에서의 신호 응답 특성이 이해되어야만 전체적인 시스템 해법을 제공하는 것이 된다. 마이크로파 reflectometry를 이용하여 진단하는 대상인 플라즈마의 특성에 따른 시스템의 구성을 설명하고, 파동수 및 밀도 섭동에 관한 시스템의 특성을 실험적으로 조사하기 위한 장치를 설명하였다. 마이크로파 reflectometry의 신호는 대부분의 전자기파 에너지가 반사되는 지역에서 기인하는 cutoff 신호와 교란 신호와의 상호 작용으로 발생하는 산란 신호로 구성된다. 이 논문에서는 마이크로파 reflectometry의 산란 신호 특성을 실험적 방법으로 조사한 결과를 제시하며, 1차원 파동방정식을 이용한 수치 해석적 결과와 비교 분석하였고, cutoff 신호 특성과도 비교하였다.