• 한국통신학회논문지
• /
• 제29권9C호
• /
• pp.1279-1288
• /
• 2004

본 논문에서는 microwave 채널 환경에 적합한 OFDM(Orthogonal Frequency Division Multiplexing) 기반의 DMR(Digital Microwave Radio)시스템 구조를 제안하고 시스템 성능을 분석하였다. 기존의 단일 반송파 방식의 DMR 시스템은 High-level QAM변조방식을 사용하며 시스템 구성이 복잡하고, 페이딩 채널에 매우 민감한 특성을 갖기 때문에 전송용량의 한계가 발생한다. 따라서 이러한 문제점을 극복하기 위한 방안으로 페이딩 채널에 강한 OFDM 방식이 연구되어왔다. 본 논문에서는 기존 OFDM에서 사용된 windowing 방식 대신 BL-PSF(Band-Limited Pulse Shaping Filter)를 이용 하므로서 GI/GB(Guard Interval/Guard Band) 등의 잉여 데이터 사용을 지양하여 전송용량을 향상 시킬수 있도록 하였으며, IFFT/FFT 블록의 이용효율을 개선시킬 수 있도록 하였다. 본논문에서는 microwave 채널 환경에 대해 단일 반송파 방식의 DMR 시스템과 OFDM/QPSK-DMR 시스템의 성능을 시뮬레이션하여 비교분석하였다. 그 결과, 제안하는 DMR 시스템은 부 반송파의 수가 많아질수록 단일 반송파 방식의 DMR 시스템보다 우수한 fade margin을 갖는것을 알 수 있었다.

• 전기전자학회논문지
• /
• 제24권2호
• /
• pp.446-452
• /
• 2020

본 논문에서는 실외용 움직임 감지에 적합한 K대역 마이크로파 움직임 감지 센서를 활용한 에너지 절감형 LED 모듈을 제안하였다. 헤어핀 형태의 마이크로스트립 공진기를 이용한 발진기를 설계하여 안정성을 높이고 제작이 쉽도록 하였다. 신호의 방사를 위해 송수신 2채널 패치 배열 안테나를 개발하여 적용하였다. 수신된 신호로부터 도플러 천이 값을 획득하기 위해 윌킨슨 전력분배기 및 링 하이브리드 혼합기를 개발하여 적용하였다. 신호의 안정성 및 원치 않는 외부잡음으로부터 보호하기 위해 쉴드 캔을 제작하여 장착하였다. 제안된 움직임 감지 센서를 실증용 LED 모듈에 장착하여 에너지 절감 성능을 모의실험을 통하여 검증하였다.

• 전자공학회논문지A
• /
• 제32A권7호
• /
• pp.36-42
• /
• 1995

In this paper, the CAD program for designing the microwave waveguide narrow-band bandpass filters has been developed by the passband correction method with filter synthesis for the MDR(Microwave Digital Relay) system. Here, the modified double E-plane structures are employed in the filter structure which is analyzed by the variational method. Using the developed CAD program, 0.01dB equi-ripple chebyshev type 6-section bandpass filters used in the MDR system operating nationally is designed at the center frequency of 11.0GHz, fabricated with tunable type and then measured by tuning process. The experimantal results show good agreements with the theoretical results.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
• /
• pp.26-28
• /
• 2008

Soil moisture plays an important role in the land-atmosphere energy balance because it governs the partitioning of energy through latent heat fluxes or evapotranspiration. From the numerous studies, it is evident that the L-band radiometer is a useful and effective tool to measure soil moisture. The objective of the study is to develop and to verify the soil moisture retrieval algorithms for the L-band radiometer system. Through the radiometer-observed brightness temperature, surface emissivity and reflectivity can be derived, and, hence, soil moisture. We collect field and L-band airborne radiometer data from washita92, SGP97 and SGP99 experiments to assist the development of the retrieval algorithms. Upon launching the satellite L-band radiometer such as ESA-sponsored SMOS (Soil Moisture and Ocean Salinity) mission, the developed algorithms may be used to study and monitor globe soil moisture change.

• Current Optics and Photonics
• /
• 제2권1호
• /
• pp.34-38
• /
• 2018

An X-band microwave photonic (MWP) filter using switch-based fiber-optic delay lines has been proposed and experimentally demonstrated. It is composed of two electro-optic modulators (EOMs) and $2{\times}2$ optical MEMS-switch-based fiber-optic delay lines. By changing time-delay difference and coefficients of each wavelength signal by using fiber-optic delay lines and an electro-optic modulator, respectively, a bandpass filter or a notch filter can be implemented. For an X-band MWP filter with four channel elements, fiber-optic delay lines with the unit time-delay of 50 ps have been experimentally realized and the frequency responses corresponding to the time-delays has been measured. The measured frequency response error at center frequency and the time-delay difference error were 180 MHz at 10 GHz and 3.2 ps, respectively, when the fiber-optic delay line has the time-delay difference of 50 ps.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권5호
• /
• pp.492-499
• /
• 1997

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1985년도 추계학술발표회 논문집
• /
• pp.199-201
• /
• 1985

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.623-624
• /
• 2006

In this paper, we introduce the design and fabrication of V-band power amplifier MMIC with excellent gain-flatness for IEEE 802.15.3c WPAN system. The V-band power amplifier was designed using ETRI' $0.12{\mu}m$ PHEMT process. The PHEMT shows a peak transconductance ($G_{m,peak}$) of 500 mS/mm, a threshold voltage of -1.2 V, and a drain saturation current of 49 mA for 2 fingers and $100{\mu}m$ total gate width (2f100) at $V_{ds}$=2 V. The RF characteristics of the PHEMT show a cutoff frequency, $f_T$, of 97 GHz, and a maximum oscillation frequency, $f_{max}$, of 166 GHz. The gains of the each stages of the amplifier were modified to have broadband characteristics of input/output matching for first and fourth stages and get more gains of edge regions of operating frequency range for second and third stages in order to make the gain-flatness of the amplifier excellently for wide band. The performances of the fabricated 60 GHz power amplifier MMIC are operating frequency of $56.25{\sim}62.25\;GHz$, bandwidth of 6 GHz, small signal gain ($S_{21}$) of $16.5{\sim}17.2\;dB$, gain flatness of 0.7 dB, an input reflection coefficient ($S_{11}$) of $-16{\sim}-9\;dB$, output reflection coefficient ($S_{22}$) of $-16{\sim}-4\;dB$ and output power ($P_{out}$) of 13 dBm. The chip size of the amplifier MMIC was $3.7{\times}1.4mm^2$.

• Journal of Radiation Protection and Research
• /
• 제42권1호
• /
• pp.21-25
• /
• 2017

Background: We are developing L-band and S-band microwave dielectric absorption systems aiming novel dosimetry using DNAs, such as plasmid DNA and genomic DNA, and microwave technology. Materials and Methods: Each system is composed of a cavity resonator, analog signal generator, circulator, power meter, and oscilloscope. Since the cavity resonator is sensitive to temperature change, we have made great efforts to prevent the fluctuation of temperature. We have developed software for controlling and measurement. Results and Discussion: By using this system, we can measure the resonance frequency, f, and ${\Delta}Q$ (Q is a dimensionless parameter that describes how under-damped an oscillator or resonator is, and characterizes a resonator's bandwidth relative to its center frequency) within about 3 minutes with high accuracy. Conclusion: This system will be expected to be applicable to DNAs evaluations and to novel dosimetric system.

• Current Optics and Photonics
• /
• 제2권6호
• /
• pp.563-567
• /
• 2018

We propose and experimentally demonstrate a simple tunable photonic microwave band-pass filter with high resolution using a reflective semiconductor optical amplifier (RSOA) and an optical time-delay line. The RSOA is used as a gain medium for generating cross-gain modulation (XGM) effect as well as an optical source. The optical source provides narrow spectral width by self-injection locking the RSOA in conjunction with a partial reflection filter with specific center wavelength. Then, when the RSOA is operated in the saturation region and the modulated recursive signal is injected into the RSOA, the recursive signal is inversely copied to the injection locked optical source due to the XGM effect. Also, the tunability of the passband of the proposed microwave filter is shown by controlling an optical time-delay line in a recursive loop.