• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.5
• /
• pp.1023-1028
• /
• 2012

A MMIC (Monolithic Microwave Integrated Circuit) mixer chip using the Schottky diode of an GaAs p-HEMT process has been developed for the I/Q demodulator of non-contact near field microwave probing system. A single balanced mixer type is adopted to achieve simple structure of the I/Q demodulator. A quadrature hybrid coupler and a quarter wavelength transmission line for 180 degree hybrid are realized with lumped elements of MIM capacitor and spiral inductor to reduce the mixer chip size. According to the on-wafer measurement, this MMIC mixer covers RF and LO frequencies of 1650MHz to 2050MHz with flat conversion loss. The MMIC mixer with miniature size of $2.5mm{\times}1.7mm$ demonstrates conversion loss below 12dB for both variations of RF and LO frequencies, LO-to-IF isolation above 43dB and RF-to-IF isolation above 23dB, respectively.

• ETRI Journal
• /
• v.45 no.2
• /
• pp.338-345
• /
• 2023

A filtering power divider based on air-filled substrate-integrated waveguide (AFSIW) technology is proposed in this study. The AFSIW structure is used in the proposed filtering power divider for substantially reducing the transmission losses. This structure occupies a large area because of the use of air as a dielectric instead of typical dielectric materials. A filtering power divider provides power division and frequency selectivity simultaneously in a single device. The proposed filtering power divider comprises three AFSIW cavities. The filtering function is achieved using symmetrical inductive posts. The input and output ports of the proposed circuit are realized by directly connecting coaxial lines to the AFSIW cavities. This transition from the coaxial line to the AFSIW cavity eliminates the additional transitions, such as AFSIW-SIW and SIW-conductor-backed coplanar waveguide, applied in existing AFSIW circuits. The proposed power divider with a second-order bandpass filtering response is fabricated and measured at 5.5 GHz. The measurement results show that this circuit has a minimum insertion loss of 1 dB, 3-dB fractional bandwidth of 11.2%, and return loss exceeding 11 dB.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.2
• /
• pp.147-151
• /
• 2009

A wideband correlator, with 45% relative bandwidth is proposed at the frequency range of 3.1-5.1GHz. The structures of the correlator components such as the delay line and the Wilkinson power divider are designed to be realized in transmission line form using the Agilent's Advanced Design System (ADS). The correlator made by using three unique wideband 3-dB couplers, rat-race coupler and one 3-dB wilkinson power divider to reach the required bandwidth. The insertion loss, amplitude imbalance and phase imbalance between ports are presented. The proposed correlator makes compact size better than correlator of conventional structure.

• Journal of IKEEE
• /
• v.2 no.1 s.2
• /
• pp.15-23
• /
• 1998

In this paper, distributed mixer is studied at microwave frequency. The circuit of distributed mixer composed of gate 1,2, drain transmission lines, matching circuits in input and output terminal, DGFET's. For impedance matching of input and output port at higher frequency, image impedance concept is introduced. In distributed mixer, a DGFET's impedances are absorbed by artificial transmission line, this type of mixer can get a very broadband characteristics compared to that of current systems. A RF/LO signal is applied to each gate input port, and are excited the drain transmission line through transcondutance of the DGFET's. The output signals from each drain port of DGFET's added in same phases. We designed and frabricated the distributed mixer, and a conversion gain, noise figure, bandwidth, LO/RF isolation of the mixer are shown through computer simulation and experimentation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.5
• /
• pp.3139-3145
• /
• 2014

This paper describes the design of a size-reduced ring hybrid coupler for microwave band using an artificial dielectric substrate(ADS). ADS structure adopts the second substrate on which has lots of the metalized via-holes. The effective capacitance and effective dielectric constant per unit length of ADS increases compared to the normal substrate due to the via-holes. This enables the physical length of microstrip transmission line to be reduced by adopting ADS instead of the normal substrate. In order to present an example of size-reduction of microwave wireless circuit by ADS, a size-reduced 3GHz ring hybrid coupler is designed, fabricated and measured in this work. The designed coupler has the smaller size from the normal one by 65% due to the ADS, while no critical degradation from ideal performances is observed. The measured power division ratio at two output ports are -3.05dB and -3.135dB, respectively. In addition, the phase differences are 3o for in-phase division and 176o for out of phase split. The measured performances are so similar to ideal ones, and prove the design of size-reduced ring hybrid coupler using ADS is successful.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.1
• /
• pp.99-104
• /
• 2013

In this paper, we developed a fully integrated downconverter MMIC (monolithic microwave integrated circuit) including Lange coupler and output active balun for millimeter wave applications. Concretely, ${\lambda}$/4 transmission line was added to Lange coupler for size reduction of RF/LO input, and mixed RF/LO signals were applied to gate of the FET of mixer. Active balun was used at output port for a coupling of out-of-phase IF output signals. According to measured results, the proposed downconverter MMIC showed good RF performances. For example, the downconverter MMIC showed an LO leakage power of -25 dBc at IF output port, and a RF-LO isolation of 18 dB. Therefore, off-chip components such as LO rejection filters were not required for a normal operation of the proposed downconverter MMIC. The proposed downconverter MMIC showed a conversion gain of 10.3 dB at RF frequency of 63 GHz. The size of the downconverter MMIC including all active and passive components was $2.2{\times}1.4mm^2$.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.6
• /
• pp.169-174
• /
• 2012

Electromagnetic interference(EMI) shielding effectiveness(SE) was investigated in of woven fabric made of epoxy/copper-nickel fabrics and nickel coated carbon fiber reinforced acrylonitrile-butadiene-styrene(ABS) composites. The coaxial transmission line method was used to measure the EMI shielding effectiveness of the composites. We designed and constructed a measuring system, consisting of a network analyzer and a device that plays the serves as a sample holder and at the same time as a transmission medium of the incident electromagnetic wave. The measurement of SE were carried out frequency range from 100MHz to 2GHz. It is observed that the SE of the composits is the frequency dependent increase with the increase in nickel coated carbon fibre volume fraction. The nickel coating with 20wt% ABS composite was shown to exhibit up to 60dB of SE. The result that nickel coated carbon fibre ABS composite can be used for the purpose of EMI shielding as well as for some microwave applications.

• ETRI Journal
• /
• v.40 no.3
• /
• pp.389-395
• /
• 2018

A novel class of planar metamaterial unit-cells consisting of a peace logo pattern is presented. A significant advantage of the proposed peace-logo planar metamaterial (PLPM) unit-cell over existing designs is its tunability, simplicity, and compatibility with microstrip structures. The theoretical analysis is founded on the famous transmission-line theory for the metamaterial concept. Then, the tunable dual-band two-sided PLPM (TSPLPM) unit-cell is designed by printing a similar PLPM pattern at the bottom of the substrate. The influence of the bottom PLPM pattern on the resonance frequencies of the unit-cell was analyzed by performing numerical simulations using CST Microwave Studio 2017 and HFSSv15 simulators. The results of the numerical simulations demonstrated that the proposed TSPLPM has the ability to control the resonance frequencies over 50 GHz-75 GHz for millimeter-wave applications.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.5
• /
• pp.734-739
• /
• 2001

In this paper, the technique of analysis and optimization on the Passive intermodulation(PIM) in a filter using coaxial transmission resonator, is presented. The developed simulation technique can reduce PIM power without the degradation of the linear filter response, through the variation of filter dimensions. The increase of PIM in filter is depended on currents flowing through each resonator forming filter. The reduction of these currents therefore makes the reduction of PIM power.

• Journal of electromagnetic engineering and science
• /
• v.11 no.4
• /
• pp.290-297
• /
• 2011

Recent progresses in the live electrooptic imaging (LEI) technique are reviewed with emphasis on its functionality of real-time visual accesses to traveling electric waves in the GHz range. Together with the principles, configurations, and procedures for the visual observation experiments by an LEI camera system, the following results are described as examples indicating the wide application ranges of the technique; Ku-band waves on arrayed planar antennas, waves on a Gb/s-class digital circuit, W-band waves traveling both in slab-waveguide modes and aerially, backward-traveling wave along composite right/left-handed transmission line, and, waves in monolithic microwave integrated circuit module case.