• The Korean Journal of Food And Nutrition
• /
• v.22 no.1
• /
• pp.8-13
• /
• 2009

Effects of microwave and ultrasonication on chitin extraction time were investigated in this study. Chitin was extracted from ground crab shell by demineralization in 1.0 N HCl solution at 25$^{\circ}C$ with or without ultrasonication and deproteinization in 1.0 NaOH solution at 100$^{\circ}C$ without ultrasonication and at 70$^{\circ}C$ with ultrasonication. Microwave treatment was also used for deproteinization with 5 min heating and 5 min standing without microwave. The changes in color difference, the contents of ash, calcium and nitrogen were measured during demineralization and deproteinization. Ultrasonication of 4 hr in 1.0 N HCl solution for removal of calcium and 1.5 hr of microwave heating in 1.0 N NaOH for deproteinization corresponded to 6 hr in 0.1 N HCl and 2 hr in 1.0 N NaOH of heating at 100$^{\circ}C$ without those treatments, respectively. The data obtained showed that these treatments were effective reduction of chitin extraction time by 25${\sim}$33% for chitin preparation. The chitin obtained from these ultrasonication and microwave treatments resulted 0.55% of ash, 0.25% of calcium, 2.47% of nitrogen and 20.64% of yield ratio. Those treatments selected were also reduced the darkness development time of the chitin solution during demineralization and deproteinization.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.6
• /
• pp.779-783
• /
• 1999

The process of alginate preparation was shortened with microwave pretreatment and hot water extraction without any other treatment. The yield of extracted alginate was very different according to raw material and microwave treatment conditions. The yield of extracted alginate from sea mustard was higher than sea tangle and increased with the temperature rise and time of microwave treatment. Optimum extraction conditions by microwave treatment were 90 min at $100^{\circ}C$ for the sea mustard and 120 min at $100^{\circ}C$ for the sea tangle. On the other hand, the solubility of the alginate from sea mustard was $69\%\~80\%$ and the viscosity were 8.7$\~$1.5 cps, respectively. The solubility and the viscosity of the sea tangle alginate was higher than the sea mustard to $77\~84\%$ and in the range of 8.9$\~$1.8 cps, respectively. The extraction temperature by hot water greatly influenced on the yield of alginate, but the solubility and viscosity was not affected by the hot water extraction. The molecular weight of alginate obtained through the extraction by $Na_2CO_3$ solution and the microwave pretreatment was 800 kDa, and in the range of 12$\~$45 kDa, respectively.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.9 no.2
• /
• pp.135-144
• /
• 1999

The purposes of this study were to survey types of pretreatment methods adopted by industrial hygiene laboratories in Korea for extracting heavy metals in welding fume samples and to compare performances of two pretreatment methods, the acid extraction and the microwave digestion, in extracting heavy metals contained in the real workplace samples from various welding jobs including arc, argon, and carbon dioxide. A total of 25 analytical chemists in the industrial hygiene laboratories participating the quality control program directed by the Korea Industrial Safety Corporation were interviewed by telephone. For the purpose of comparing performance of extracting heavy metals from real workplace samples, a total of 53 welders from 21 workplaces located in Anyang, Uiwang, and Kunpo areas were sampled from the period of March 22, 1999 to April 20, 1999. It was found that the most frequently adopted method for samples from the quality control program was the acid extraction method(40%) followed by the NIOSH 7300 method(36%). The NIOSH method, however, was the dominant method(36%) for samples from workplace followed by the acid extraction method(28%). In this study, two extraction methods, the acid extraction and the microwave digestion, were compared in terms of recovery rate, accuracy, and precision for both manganese and chromium. Both methods produced comparable results for the samples prepared for the quality control program. In contrast, concentrations of two heavy metals determined from real workplace samples pretreated with the microwave digestion method were statis tically significantly higher, manganese(166%) and chromium (200%), than those of utilizing the acid extraction method. These findings were consistent regardless of types of welding techniques used. The results of this study clearly show the importance of verifying the analytical performances of extraction methods for heavy metals not only for the samples from the quality control program but also from the real world samples collected from welding jobs.

• KSBB Journal
• /
• v.29 no.1
• /
• pp.22-28
• /
• 2014

In this study, we investigate the effect of pretreatment method on lipid extraction from Enteromorpha intestinalis using physical, thermo-chemical, and enzymatic process such as ultrasonication, high temperature treatment, freezing, microwave irradiation, osmotic shock, pH shock, homogenizing, and enzymatic treatment. In pretreatment with separated lipid extraction, the high extraction yield was obtained by high temperature treatment ($121^{\circ}C$ for 5 min) with 0.1 N HCl, which is 1.4 times higher than that of control. In pretreatment with direct lipid extraction, the high extraction yields were obtained by 0.1 N HCl pretreatment, microwave irradiation (700W, 1 min with twice), and 10% NaCl pretreatment, which is 1.45 times higher than that of control. In the result of enzymatic pretreatment with 17 kinds of enzymes, Cellic CTec II showed the high extraction yield of 5.3%, and which is 1.9 times higher than that of control. Moreover, the extraction yield was increased by the increase of enzyme amounts. In 10% enzyme amount, about 5.8% yield was obtained.

• Food Science and Preservation
• /
• v.18 no.4
• /
• pp.546-551
• /
• 2011

Response surface methodology (RSM) was used for the microwave-assisted extraction (MAE) of the effective components of grape seed, such as its antioxidative and nitrite-scavenging abilities. Microwave power (2,450 MHz, 0-160W), ethanol concentration (0-100%), and MAE time (1-5 min) were used as independent variables (Xi) for the central composite design to yield 16 different MAE conditions. The optimum MAE conditions were predicted for the dependent variables of the extracts, such as the total phenolic content ($Y_1$) antioxidative ability ($Y_2$), and nitrite-scavenging ability ($Y_3$), depending on different microwave powers, ethanol concentrations, and MAE times. The determination coefficients ($R^2$) of the regression equations for the dependent variables ranged from 0.8024 to 0.9498. The maximal values of each dependent variable were predicted at different MAE conditions, as follows: 3.19% total phenolic content at 142.32W, 44.30% ethanol, and 4.36 min, and 1.22 antioxidative ability at 84.44W, 56.60% ethanol, and 3.28 min. More than 99.5% nitrite-scavenging ability was predicted at pH 1.2-3.0, 30.80-106.58W, 49.32-55.18% ethanol, and 3.72-4.58min, respectively. The results indicated that the total phenolic content and anti oxidative ability showed a higher correlation with each other in that they were more influenced by microwave power than by the other variables, while the nitrite-scavenging ability was largely influenced by the ethanol concentration.

• Food Science and Preservation
• /
• v.14 no.5
• /
• pp.474-480
• /
• 2007

Response surface methodology (RSM) was employed to optimize extraction conditions preserving valuable functional properties of fluid Cheonggukjang obtained from red ginseng. Based on a central composite design, the study plan was established using variations in microwave power, ethanol concentration, and extraction time. Regression analysis was applied to obtain a mathematical model. A maximum electron donating ability (EDA) of 99.09% was obtained under the specific extraction conditions of microwave power 135.62 W, ratio of solvent to sample contents. 3.60 g/mL, and an extraction time of 11.79 min. The maximum inhibitory effect on tyrosinase activity was 10.02% at 119.16 W, 4.02 g/mL, and 5.57 min. The maximum superoxide dismutase (SOD)-like activity was 63.83% under the extraction conditions of 125.29 W, 4.04 g/mL, and 11.02 min. Based on superposition of four-dimensional RSM data obtained to optimize electron donating ability, nitrite-scavenging ability, inhibitory effect on tyrosinase activity, and SOD-like activity, the optimum ranges of extraction conditions were found to be a microwave power of $l{\sim}85 W$, a ratio of solvent to sample content of $1.4{\sim}2.8\;g/mL$, and an extraction time of $6.5{\sim}11\;min$.

• Polymer(Korea)
• /
• v.32 no.1
• /
• pp.13-18
• /
• 2008

For the evaluation of brominated flame retardants included in polymeric electronic devices, we investigated the extraction methods and solvent systems for four different types of polymers of PC (polycarbonate), PP (polyropylene), PET (poly(ethylene terephthalate)) and PBT (poly(butylene terephthalate)) using different solvent systems of hexane/acetone, THF, toluene, and THF/toluene. In order to compare the extraction efficiency of different methods and solvent systems, the deca-BDE (decabromo diphenyl ether) flame retardant was included in PC, PP, PET and PBT systems and subsequently extracted by soxhlet, ultrasonic, accelerated solvent, microwave and supercritical fluid extraction methods. The amount of the extracted flame retardant was monitored to evaluate the extraction efficiency. The ultrasonic extraction method was found not to be acceptable as an extraction method for the polymer systems mainly due to a low salvation efficiency of the organic solvents. Soxhlet, accelerated solvent and microwave extraction methods exhibited over 80% of extraction efficiency for toluene. The supercritical fluid extraction method, which has been used as an extraction method for flame retardants in polymers, showed the extraction efficiencies of ca. 100% for PC and PP in the optimal extraction conditions of $60^{\circ}C$ and 120 bar.

• Food Science and Preservation
• /
• v.7 no.3
• /
• pp.273-277
• /
• 2000

Some fundamental conditions were investigated in microwave-assited extraction (MAE) for oleoresin from Chinese dried ginger. The fifty watts of microwave energy(2,450 MHz), 60 mesh in particle size and 1:10 (g/mL) ratio of sample to solvent were the optimum conditions. Lower yield of soluble oleoresins was obtained at higher concentrations of ethanol. Radical scavenging ability was highest in extracts by using 25% of ethanol. Total phenolics in extracts were remarkably increased at above 50% of ethanol concentration. Overall yield of oleoresin components increased in proportional to extraction time up to 7 min. Based on the above results, it is indicated that ethanol concentration is a critical parameter in MAE.

• Food Science and Preservation
• /
• v.12 no.6
• /
• pp.617-623
• /
• 2005

Response surface methodology (RSM) was applied to microwave-assisted process (MAP) extraction for effective components from Mosla dianthera M. Microwave power (2,450 MHz, 0-160 W) and extraction time (1-5 min) were used as independent variables ($X_i$) for central composite design to yield 10 different extraction conditions. Optimum conditions were predicted for dependent variables of $75\%$ ethanol extracts, such as total yield($Y_1$), total phenolics($Y_2$), total flavonoids($Y_3$), and electron donation ability($Y_4$, EDA). Determination coefficients ($R^2$) of regression equations for dependent variables ranged from 0.8397 to 0.9801, and microwave power was observed to be more influential than extraction time in MAP. The maximal values of each dependent variable predicted at different extraction conditions of microwave power (W) and extraction time (min) were as follows; $6.76\%$ of total yield at 142.00 W and 4.36 min, 78.68 mg/g of total phenolics at 136.78 W and 4.40 min, 6.75 mg/g of total flavonoids at 159,69 W and 3.17 min, and $49.81\%$ of EDA at 133.87 W and 4.47 min, respectively. The superimposed contour maps for maximizing dependent variables illustrated the MAP conditions of 79 to 113 W in power and of 2.73 to 3.84 min in extraction time.

• Food Science and Preservation
• /
• v.24 no.7
• /
• pp.949-956
• /
• 2017

This study attempted to find optimum extract range of active ingredient for barley sprouts (Hordeum vulgare L.). Extracts from Hordeum vulgare L. were made by microwave extraction method and total polyphenol content (TPC), total flavonoid content (TFC), DPPH radical scavenging activity (DPPH) were measured with extract of Hordeum vulgare L.. Response surface methodology (RSM) was applied to a extraction process, and central composite design (CCD) was also used for this process to examine the optimum condition. Independent variables ($X_n$) are concentration of ethanol ($X_1$: 0, 25, 50, 75, 100%), microwave power ($X_2$: 60, 120, 180, 240, 300 W), extraction time ($X_3$: 4, 8, 12, 16, 20 min). Dependent variables ($Y_n$) are TPC ($Y_1$), TFC ($Y_2$), DPPH radical scavenging ($Y_3$). It is formed by sixteen conditions to extract. The $R^2$ value of dependent variables is ranged from 0.90 to 0.97 (p<0.05). Experiments values within the optimal range (40% of ethanol concentration, 120 W of microwave power, 18 min of extraction time) were 3.74 mg GAE/g (TPC), 3.00 mg RE/g (TFC), 35.43% (DPPH), respectively. Under the optimized conditions, predicted value showed no significant difference comparing with the experimental values.