• 광학과기술
• /
• 제10권1호
• /
• pp.36-43
• /
• 2006

지난 2005년 10월 서울 올림픽파크텔에서 개최된 MWP2005에서 발표된 내용 중 효율적인 ROF 시스템 구현을 위해 필요한 MWP 소자 기술에 대한 내용을 소개하였다. MWP 2005에서는 특히 수 Gbps 이상의 정보를 밀리미터파 대역에서 보내기 위한 기술에 대해 다양하게 다뤄졌으며, 125GHz의 밀리미터파 신호 전송 실험 결과가 제시되었다. 또한 광섬유 링크를 통해 아날로그 신호 전송을 효율적으로 수행하기 위해, 높은 광 포화전력을 가지면서 기울기 효율이 우수한 전계흡수 변조기가 소개되었으며, 삽입손실이 크지 않으면서 전계흡수 변조기와 광검출기를 집적시킨 구조의 실험결과도 소개되었다. 또한 MWP 2005에서는 새로운 기술에 대한 소개 뿐 아니라 향후 4세대 이동통신 등에서 핵심 부품 기술로 자리잡을 수 있는 ROF 기술이 현실적으로 적용될 수 있는 경제적 방안에 대한 관심도 크게 증대되기도 하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.652-655
• /
• 2004

RF MEMS is a miniature device or an array of integration devices and mechanical components and fabricated with If batch-processing techniques. RF MEMS application area are in phased arrays and reconfigurable apertures for defence and telecommunication systems, switching network for satellite communication, and single-pole double throw switches for wireless application. Recently, RF MEMS switches have been developed for the application to the milimeter wave system. RF MEMS switches offer a substantilly higher performance than PM diode or FET switches. In this paper, SPDT(single-pole-double-throw) switch are designed to use 10 GHz. Actuation voltage and displacement are simulated by tool. And stress and distribution are simulated.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.932-934
• /
• 2004

Due to the increasing variety and capacity of information and communication media, systems of microwave band communication have branched out extensively. Surface acoustic wave (SAW) devices fabricated FeSiB thin films on quartz substrate were deposited by RF magnetron sputter and by photolithographic processes. This device is with a center frequency 146MHz and the insertion loss as low as -43dB was obtained.

• 공업화학
• /
• 제30권2호
• /
• pp.133-140
• /
• 2019

Two-dimensional (2D) ultrathin molybdenum dichalcogenides $MoS_2$ has gained a great deal of attention in energy conversion and storage applications because of its unique morphology and property. The 2D $MoS_2$ nanosheets provide a high specific surface area, 2D charge channel, sub-nanometer thickness, and high conductivity, which lead to high electrochemical performances for energy storage devices. In this paper, an overview of properties and synthetic methods of $MoS_2$ nanosheets for applications of supercapacitors and rechargeable batteries is introduced. Different phases triangle prismatic 2H and metallic octahedral 1T structured $MoS_2$ were characterized using various analytical techniques. Preparation methods were focused on top-down and bottom-up approaches, including mechanical exfoliation, chemical intercalation and exfoliation, liquid phase exfoliation by the direct sonication, electrochemical intercalation exfoliation, microwave-assisted exfoliation, mechanical ball-milling, and hydrothermal synthesis. In addition, recent applications of supercapacitors and rechargeable batteries using $MoS_2$ electrode materials are discussed.

• 반도체디스플레이기술학회지
• /
• 제20권4호
• /
• pp.102-107
• /
• 2021

In this paper, the measurements of received power was shown and compared in two developed 5.8GHz 25W wireless charging systems. One is the system using commercial transmission antenna, and the other is the system using transmission antenna combined with metamaterial. The system combined with metamaterial shows higher received power due to negative reflective index of metamaterial. In addition, a comparative analysis of the systems shows that the transmission efficiency in the systems can decrease the real gain of transmission antenna due to higher side robe of beam pattern. The side robe beams of transmitting antenna interferes transmitted beam with the reflected beams from the bottom region due to the side robes. The failure problems of the RF wireless charging systems are discussed and proposed in order to charge mobile devices through the RF wireless charging system.

• 한국인터넷방송통신학회논문지
• /
• 제16권4호
• /
• pp.27-30
• /
• 2016

본 눈문에서는 마이크로스트립 안테나의 좁은 대역폭 문제를 개선하여 IEEE 802.11의 표준 규격을 모두 포함할 수 있는 WLAN과 WiFi를 위한 3.6GHz와 5.2GHz의 대역에 만족하는 이중 대역 배열 안테나를 설계 하였다. 제안된 마이크로스트립 배열 안테나의 기판은 FR-4(er=4.3)이고, 크기는 $25mm{\times}45mm{\times}0.8mm$, 두께는 t=0.035mm이며 시뮬레이션은 CST Microwave Studio 2014를 사용하였다. 입력 대비 반사손실은 -10dB 이하에서 동작하고, 이득은 3.6GHz일 때 2.5dB, 5.2GHz일 때에는 3.5dB의 결과를 나타내었다. 소형화되어 설계된 안테나를 휴대폰 및 전자 기기에서 충분히 사용할 수 있도록 하였다.

• 한국전자파학회논문지
• /
• 제24권5호
• /
• pp.508-514
• /
• 2013

기판 집적 도파관(SIW: Substrate Integrated Waveguide)는 양면 도체 기판과 도체 비아를 사용하여 매우 얇은 구형 도파관을 형성하는 것으로 사용되는 도체 모두가 직류적으로 하나로 연결되어 있어서 직류 전원 공급이 불가능하다. 본 논문에서는 직류 전원 공급이 가능한 folded corrugated substrate integrated waveguide(FCSIW)를 제안한다. 제안된 FCSIW는 SIW에 사용되는 전도성 비아를 구부러진 형태의 개방형 스터브로 대체하여 직류 전원 공급이 가능하다. 이 FCSIW는 기존의 직류 전원 공급이 가능한 corrugated substrate integrated waveguide (CSIW)에서 나타나는 누설파 발생이 없어서 광대역 전송 특성이 우수하고, CSIW에 비하여 전송선의 단면 폭을 30 % 줄일 수 있다. 9~15 GHz 대역에서 측정된 154 mm 길이의 FCSIW의 평균 삽입 손실(1.49 dB)이 CSIW의 값(3.08 dB)에 비하여 매우 우수함을 확인하였으며, 상호 간섭 측정으로부터 누설파가 발생되지 않음을 확인하였다.

• Journal of Electrical Engineering and Technology
• /
• 제2권3호
• /
• pp.391-395
• /
• 2007

MgO enhanced $(Ba_{0.6}Sr_{0.4})$ $TiO_3$ thick films have been fabricated by a tape casting and firing method for tunable devices on the microwave frequency band. In order to improve ferroelectric properties, the composite thick films enhanced with MgO on BST have been asymmetrically annealed by a focused halogen beam method. Dielectric constants of composite thick films are changed from 1050 to 1300 at 100 kHz after 60 s and 150 s annealing by the focused halogen beam. Even though no prominent changes were previously observed from the thick films before and after annealing in terms of chemical composition and surface morphology, it is clear that the average particle size of the thick films calculated by Scherrer's formula were increased by annealing. Furthermore, a strong correlation between particle size and dielectric constant of the composite thick films has been observed; dielectric constant increases with increased particle size. This has been attributed to the increased volume of ferroelectric domain due to increased particle sizes. As a result, the tuning range was improved by halogen beam annealing.

• 한국재료학회지
• /
• 제17권7호
• /
• pp.386-389
• /
• 2007

The dielectric properties of $(Ba_{0.5}Sr_{0.5})TiO_3$ ferroelectric thin films have been investigated according to the substrates in order to optimize the their properties. MgO, r-plane sapphire, and poly-crystalline sapphire (Alumina) substrates have been used to deposite $(Ba_{0.5}Sr_{0.5})TiO_3$ ferroelectric thin films by RF magnetron sputtering. The BST thin films deposited on the single crystal (100)MgO substrates have high tunability and low dielectric loss. These results are caused by a low misfit between the lattice parameters of the BST films and the substrate. The BST films deposited on r-plane sapphire have relatively high misfit, and the tunability of 17% and dielectric loss of 0.0007. To improve the dielectric properties of the BST films, the post-annealing methods has been introduced. The BST films deposited on (100)MgO, (1102)r-plane sapphire, and poly-crystalline sapphire substrates have best properties in post-annealing conditions of $1050^{\circ}C$, $1100^{\circ}C$, and $1150^{\circ}C$, respectively. The different optimal post-annealing conditions have been found according to the different misfits between the films and substrates, and thermal expansion coefficients. Moreover, the films deposited on alumina substrate which is relatively cheap have a good tunability properties of 23% by the post-annealing.

• 한국전기전자재료학회논문지
• /
• 제27권3호
• /
• pp.156-161
• /
• 2014

We have investigated the optical properties of plamonic waveguide with tapered structure based on InP material for photonic integrated circuit(PIC). The proposed plasmonic waveguide is covered with the Ag thin film to generate the plasmonic wave on metallic interface. The optical characteristics of plasmonic waveguide were calculated using the three-dimensional finite-difference time-domain method. The plasmonic waveguide was fabricated with the lengths of 2 to $10{\mu}m$ and the widths of 400 to 700 nm, respectively. The plasmonic mode and optical loss were measured. The optimum plasmonic length is $10{\mu}m$ and widths are 600 and 700 nm in the fabricated waveguide. This plasmonic waveguide can be directly integrated with other conventional optical devices and can be essential building blocks of PIC.