• 제목/요약/키워드: Microstrip lowpass filter

검색결과 26건 처리시간 0.021초

Microstrip Coupled-Line Lowpass Filter with Wide Stopband for RF/Wireless Systems

  • Velidi, Vamsi Krishna;Mandal, Mrinal Kanti;Sanyal, Subrata
    • ETRI Journal
    • /
    • 제31권3호
    • /
    • pp.324-326
    • /
    • 2009
  • We present the design of a compact microstrip lowpass filter with a wide stopband which is up to ten times the cutoff frequency. The filter is based on a coupled-line configuration and shunt open stubs. The open stubs create additional transmission zeros, which are used to extend the stopband of the filter without any additional components or cascaded units. A prototype lowpass filter with a 3 dB cutoff frequency of 0.428 GHz and a 15 dB stopband extended up to 4.77 GHz is fabricated to validate the theoretical predictions.

  • PDF

슬롯과 개방 스터브의 특성을 결합한 소형 저역통과 여파기 (A Compact and High Performance Lowpass Filter using Combined Characteristics of Slot and Open Stub)

  • 김경훈;김상인;박익모;임한조
    • 한국전자파학회논문지
    • /
    • 제15권1호
    • /
    • pp.36-43
    • /
    • 2004
  • 본 논문에서는 접지면의 슬롯과 급전면의 병렬 개방 스터브를 이용하여 초광대역의 저지대역과 우수한 cutoff 특성을 갖는 저역통과 여파기를 제안하였다. 슬롯과 병렬개방 스터브로 형성된 저지대역을 중첩 시켜 매우 넓은 저지대역을 얻을 수 있었으며 접지면에 형성된 두 슬롯 사이의 커플링을 이용하여 기존의 저역통과 여파기보다 우수한 cutoff특성을 얻을 수 있었다. 제안한 여파기는 20.1 mm ${\times}$ 18.7 mm의 크기로 통과대역 삽입손실은 1 ㎓까지 -0.4 ㏈ 이하이고 1.187 ㎓에서 -3 ㏈ 차단 주파수를 갖는다. 저지대역은 -20 ㏈ 기준으로 1.33 ㎓에서 20 ㎓ 이상의 광대역을 이루어 이상적인 여파기에 가까운 우수한 특성을 얻을 수 있었다.

저지대역의 중첩을 이용한 캐스캐이드 저역통과 여파기의 설계 (Design of Cascaded Lowpass Filter using Combination of Stopbands)

  • 김경훈;김상인;박익모;임한조
    • 한국전자파학회논문지
    • /
    • 제15권7호
    • /
    • pp.644-652
    • /
    • 2004
  • 본 논문에서는 급전면의 개방스터브와 접지면의 슬롯으로 구성되어 있는 초광대역의 저지대역을 갖는 저역통과 여파기 단위 구조를 캐스캐이드한 저역통과 여파기를 설계하였다. 초광대역의 저지대역을 갖는 저역통과 여파기 단위 구조는 급전면 개방 스터브에 의해 통과대역 특성을 결정하는 여파기 구조와 이러한 여파기의 dual 구조로 접지면 슬롯에 의해 통과대역 특성을 결정하는 여파기 구조가 있으며, 각각의 단위구조를 캐스캐이드함으로써 단일 여파기보다 더욱 향상된 저지대역과 skirt 특성을 얻을 수 있었다. 개방 스터브에 의해 통과대역 특성이 결정되는 구조와 dual 구조의 캐스캐이드 여파기는 각각 1.035㎓와 1.286㎓에서 -3㏈ 차단 주파수를 가지며 저지대역은 두 구조 모두 -20㏈ 기준으로 20㎓ 이상의 광대역을 이루었다.

Microstrip Lowpass Filter with Very SharpTransition Band Using T-Shaped, Patch, and Stepped Impedance Resonators

  • Hayati, Mohsen;Sheikhi, Akram
    • ETRI Journal
    • /
    • 제35권3호
    • /
    • pp.538-541
    • /
    • 2013
  • A compact microstrip lowpass filter (LPF) with an elliptic function response is proposed. A high equivalent capacitance and inductance between the structures of the resonator result in the sharp transition band of 0.04 GHz from 4 GHz to 4.04 GHz with an attenuation level of -3 dB and -20 dB, respectively. To improve the LPF rejection band, multiple open stubs are connected to the proposed resonator. A filter with a 3-dB cut-off frequency at 4 GHz is designed, fabricated, and measured, and agreement between the measured and simulated results is achieved. The results show that a stopband bandwidth of 131% with a suppression level better than -20 dB is obtained while achieving a compact size with a wide stopband.

A Highly Efficient Rectenna Using Harmonic Rejection Capability

  • Kim, Youg-Hwan;Lim, Sung-Joon
    • Journal of electromagnetic engineering and science
    • /
    • 제11권4호
    • /
    • pp.257-261
    • /
    • 2011
  • A highly efficient 2.4 GHz rectenna is designed using a harmonic rejection bandpass filter. The rectenna is printed on Rogers Duroid 5880 substrate with ${\varepsilon}_r$=2.2 and a thickness of 1.6 mm. The rectenna consists of a microstrip antenna and high order harmonic rejection bandpass filter, microstrip lowpass filter, and Schottky barrier diode (HSMS2820). The use of a $2^{nd}$ and $3^{rd}$ harmonic rejection microstrip bandpass filter in the rectenna results in high conversion efficiency. The proposed rectenna achieves a RF to DC conversion efficiency of 72.17 % when the received RF power is 63.09 mW.

Temperature Dependence of Microwave Properties of HTS Multipole Lowpass Filters Consisting of Microstrip Open-Stub Lines

  • Kim, Je-Ha;Han, Seok-Kil;Kang, Kwnag-Yong;Ahn, Dal
    • ETRI Journal
    • /
    • 제19권2호
    • /
    • pp.48-58
    • /
    • 1997
  • Using high quality high-$T_c$ superconducting (HTS) YBCO thin films, we designed and fabricated 3-pole, 5-pole, and 7-pole lowpass filters consisting of microstrip transmission lines and open-stub lines. We measured the microwave response of the filters in the temperature range of T=85 K to 27 K. AtT=30 K, the observed inband insertion loss was 0.14dB and 0.02dB for the 5-pole and 7-pole filters, respectively. The cut-off frequency was 4.7 GHz for the 5-pole filter and 7.9GHz for the 7-pole filter. To the authors' knowledge, the measured inband insertion losses are the best values reported so far for the open-stub line type HTS multipole lowpass filters. The skirt property of the 5-pole filter showed a large improvement over that of the 3-pole filter as predicted from the simulation. We found that, to obtain a stable performance, the HTS multipole lowpass filters should be operated at the temperatures between 60% and 70% of $T_c$.

  • PDF

Dual-Transmission-Line Microstrip Equiripple Lowpass Filter with Sharp Roll-Off

  • Velidi, Vamsi Krishna;Sanyal, Subrata
    • ETRI Journal
    • /
    • 제33권6호
    • /
    • pp.985-988
    • /
    • 2011
  • A novel application of a dual-transmission line is proposed to design a lowpass filter (LPF). The proposed structure uses only transmission line elements to produce an equiripple LPF response with sharp roll-off. Design equations are derived using a lossless transmission line model. Controlling the electrical lengths, three transmission-zeros are realized in the stopband to obtain a sharp roll-off rate and wide stopband bandwidth. A single unit microstrip LPF with a 3-dB cut-off frequency at 1.0 GHz having a roll-off of 135 dB/GHz along with a stopband bandwidth of 69.5% is designed for validation.

Microstrip Lowpass Filter with Very Sharp Transition Band and Wide Stopband

  • Hayati, Mohsen;Sheikhi, Akram
    • ETRI Journal
    • /
    • 제33권6호
    • /
    • pp.981-984
    • /
    • 2011
  • A novel lowpass filter with a very sharp transition band and wide stopband is proposed. The proposed filter is based on T-shaped patches which are etched in symmetrical structures and folded open stub. To obtain a wide stopband, we have used stub loaded semi-circle stepped-impedance structures. By designing the resonator with high inductance and capacitance, a very sharp transition band is achieved. The proposed filter has a 3-dB cutoff frequency at 2.37 GHz and a 40-dB rejection at 2.44 GHz. The stopband with an attenuation level better than -13.2 dB is up from 2.4 GHz to 16 GHz, and consequently we have reached the high and wide rejection in stopband with compact size. Good agreements between the simulated and the measured results are presented.

초광대역의 저지대역을 갖는 3단 저역통과 필터 (A Compact Three Stage Low-Pass Filter with an Ultra-Wide Stopband)

  • 김경훈;정종호;기철식;임한조;박익모
    • 대한전자공학회논문지TC
    • /
    • 제40권3호
    • /
    • pp.25-31
    • /
    • 2003
  • 본 논문에서는 초광대역의 저지대역과 우수한 cutoff 특성을 가지는 새로운 저역통과 필터를 제안하였다. 우수한 cutoff특성을 얻기 위해 여러단을 배열하는 기존이 저역통과 필터의 단점을 극복하기 위해 두 개방 스터브 사이의 커플링 효과를 이용하였고, 접지면에 슬롯을 형성하여 고주파 부분에서의 저지대역 특성을 개선하였다. 제작한 저역통과 필터는 19.2 ㎜ × 14.9 ㎜ 의 크기로 통과대역에서의 삽입손실은 -0.15 dB 이하이며 1.1 ㎓에서 -3 dB의 차단주파수를 가진다. 저지대역폭은 삽입손실 -20 dB를 기준으로 1.5 ㎓에서 30 ㎓ 이상의 광대역을 이루어 기존 저역통과 필터의 저지대역폭을 획기적으로 증가시켰다.

마이크로스트립 선로를 이용한 광대역 차단특성을 가지는 저역통과 필터 설계 (Design of Lowpass Filter With the Wide Stopband Characteristics Using Microstrip Line)

  • 최동묵;심준환;전중성;김동일
    • 한국항해항만학회지
    • /
    • 제30권5호
    • /
    • pp.331-334
    • /
    • 2006
  • 본 논문에서는 광 대역 저지대역특성을 가지는 저역통과필터를 마이크로스트립 선로를 이용하여 설계 및 제작하였다. 개방회로 스터브를 이용한 L-C ladder형 저역통과 필터의 입 출력단에 길이가 $\lambda_g/4$인 개방 스터브를 부가함으로써, 광대역 차단특성을 가지는 필터를 개발하였다. 필터의 전체길이를 줄이기 위해 고 임피던스 마이크로스트럼 라인을 미앤더(meander) 구조로 제작하였다. 제작된 필터는 차단주파수가 2.3 GHz인 저역통과필터였고, 측정된 결과는 전산모의실험에서 예측된 값들과 잘 일치함을 알 수 있었다.