• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2001년도 종합학술발표회 논문집 Vol.11 No.1
• /
• pp.157-160
• /
• 2001

본 논문에서 5.8GHz의 주파수 대역에서 사용할 수 있는 향상된 커플링 구조와 크기를 줄인 dual-mode microstrip bandpass filter를 설계하였다. 여기서 meander loop resonator를 쓰는 이유는 크기가 작고 방사 손실이 적으며 패턴이 간단하기 때문이다. 또한 이와 비슷한 특성을 갖는 ring, square patch, disk등은 불연속 성분을 가짐으로써 이중모드의 구현이 가능하다. 향상된 형태의 dual-mode microstrip bandpass filter의 변형된 T-shaped meander loop resonator를 소형으로 발전되고. 높은 선택도를 가지는 구조이다. 이 형태의 filter에서 150MHz의 bandwidth을 가지고 5.8GHz주파수를 가지는 구조로 설계하였다.

• 한국전자파학회지:전자파기술
• /
• 제2권4호
• /
• pp.10-16
• /
• 1991

A microstrip bandpass filter using stepped impedance resonators and tapped input / output is realized with Teflon substrate, whose center frequency is 3.5 GHz and fractional bandwidth is 20%. In order to realize a wider bandwidth of 30%, the Crystal's design method and the input / output tapping scheme are used. Another microstrip filter designed as mentioned above is realized with Epsilam-10 substrate. This case shows good agreement between the theoretical responses and the measured ones.

• Journal of electromagnetic engineering and science
• /
• 제11권4호
• /
• pp.257-261
• /
• 2011

A highly efficient 2.4 GHz rectenna is designed using a harmonic rejection bandpass filter. The rectenna is printed on Rogers Duroid 5880 substrate with ${\varepsilon}_r$=2.2 and a thickness of 1.6 mm. The rectenna consists of a microstrip antenna and high order harmonic rejection bandpass filter, microstrip lowpass filter, and Schottky barrier diode (HSMS2820). The use of a $2^{nd}$ and $3^{rd}$ harmonic rejection microstrip bandpass filter in the rectenna results in high conversion efficiency. The proposed rectenna achieves a RF to DC conversion efficiency of 72.17 % when the received RF power is 63.09 mW.

• 한국정보통신학회논문지
• /
• 제4권3호
• /
• pp.565-573
• /
• 2000

본 논문에서는 깍지낀 마이크로스트립 대역통과 여파기를 설계 및 제작하였다. 깍지낀 마이크로스트립 대역통과 여파기는 일반적인 결합 선로 대역통과 여파기에 비해 주파수 선택성과 삽입 손실과 반사 손실 특성이 우수하며, 크기가 작고, 넓은 대역폭을 가진다. 깍지낀 마이크로스트립 대역통과 여파기의 구조는 평행접지판 사이의 준 TEM-모드 마이크로스트립 선로 공진기이다. 각각의 공진 소자의 길이는 중심주파수의 $\lambdag/4$이고, 선로의 한쪽은 단락회로로 종단되고 다른 한쪽은 개방회로로 종단되어 있다. 여파기는 Ensemble(version 5.0) 소프트웨어를 사용하여 최적 설계하였다. 제작된 여파기는 중심주파수 11.2GHz에서 대역폭이 2.52GHz(22.5%), 삽입손실 -1.8dB, 반사손실 -17.0dB의 특성을 나타냈다.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.278-282
• /
• 2003

The rapid growth of wireless and mobile communications has stimulated the development of multilayer filter technology. In this paper, one type of aperture-coupled microstrip interdigital-loop resonators in a multilayer structure are proposed and investigated for the applications to the design of a new class of compact microstrip bandpass filter. The new filter configuration consists of two arrays of microstrip interdigital-loop resonators that can be coupled through the apertures on the common ground plane. Depending on the arrangement of the apertures, different filtering characteristics can easily be realized. The results of measurement are almost similar to those of simulation.

• ETRI Journal
• /
• 제44권2호
• /
• pp.260-273
• /
• 2022

This study presents a novel multilayer structure of parallel coupled-line bandpass filtercentered at 2.42 GHz with a fractional bandwidth value of approximately 19.4%. The designed filter can suppress harmonics with an appropriate frequency response by incorporating different techniques based on the multilayer technique. A combination of different techniques such as radial microstrip stubs and defected ground structure (DGS) and defected microstrip structure techniques are employed to suppress harmonics up to 5f₀. These techniques are used in two layers to suppress up to 5f₀. In addition, in this study, the effects of different parameters, such as the width of slot-line DGS, the angle of diagonal line slots in the upper layer, and the air gap between the two layers on the filter performance, are investigated. To verify the correct circuit operation, the designed filter is implemented and tested. The measurement results of the proposed filter are compared with the simulation results.

• Journal of electromagnetic engineering and science
• /
• 제7권4호
• /
• pp.190-194
• /
• 2007

In this paper, a cross-coupled microstrip combline bandpass filter using stepped-impedance resonators(SIRs) is proposed. In order to improve the selectivity as well as the insertion loss, the SIR configuration is used. The cross coupling is also introduced to enhance the selectivity. The improvement of the insertion loss is demonstrated not only by deriving the quality factor of the SIR but through the measured performances. Both the proposed and the conventional combline bandpass filter with 5 % of fractional bandwidth at 2 GHz were fabricated and tested. Compared to the conventional combline bandpass filter, the proposed one exhibits the improved selectivity as well as the lower insertion loss characteristics.

• 대한전자공학회논문지
• /
• 제26권11호
• /
• pp.1728-1735
• /
• 1989

A design procedure for microstrip bandpass filters using step impedance resonators (SIR's) and tapped input/output to a conventional parallel coupled line bandpass filter is presented. The filter configuration consisting of both half-wavelength and SIR's suppreses to spurious resonance response near the second harmonics, while tapping techniques offer benefit in situations where the impractical. The measured frequency responses of the designed filter are in close agreement with the computed responses.

• Journal of electromagnetic engineering and science
• /
• 제11권2호
• /
• pp.91-96
• /
• 2011

In this paper, we propose a microstrip bandpass filter using stepped-impedance coupled-line hairpin resonators. The stepped-impedance coupled-line hairpin resonator has extended harmonic suppression in comparison with a conventional hairpin resonator due to transmission zero and the movement of harmonic frequencies resulting from the stepped-impedance characteristic. A high-pass type impedance/admittance inverter is employed in order to improve the lower frequency skirt characteristics of the passband. A 4-pole bandpass filter is designed and fabricated at 1.8 GHz. The measured results show the excellent attenuation performance at the stopband which is greater than 30 dB up to 10 GHz.

• 한국콘텐츠학회논문지
• /
• 제9권12호
• /
• pp.566-571
• /
• 2009

본 논문에서는 마이크로스트립 전송선을 이용하여 필터를 구현할 때 고조파 대역에서 나타나는 불요 공진모드 특성을 제거하도록 DCRLH 메타셀을 헤어핀 공진기와 결합하여 기본 통과대역 신호만을 전달하는 마이크로스트립 대역통과 필터를 설계하고 제작하였다. 대역통과 필터는 불요 고조파 통과특성을 제거하기 위한 DCRLH 메타셀 전송선로와 통과대역 신호를 잘 전달하기 위한 CCRLH 헤어핀 공진기로 구성하였다. DCRLH 성질을 갖는 인터디짓 메타셀(Interdigit Meta-cell)은 필터회로의 입력단과 출력단에 병렬로 삽입하였고, CCRLH 대역통과 성질을 갖는 헤어핀공진기(Hairpin Resonator)는 두개의 DCRLH 메타셀 사이에 설치하였다. 이렇게 구성함으로써 저지대역에서 나타나는 불요고조파신호를 억제시킬 수 있었고, 필터의 대역통과 성능을 개선할 수 있었다. WCDMA 이동통신과 WiBro 무선 인터넷 통신을 동시에 수행할 목적으로 제작된 마이크로스트립 대역통과 필터는 1.91GHz~2.41GHz의 통과대역에서 삽입손실은 0.2dB로 나타났고, 3GHz~7.5GHz의 저지대역에서 감쇄특성은 -30dB 이하로 양호한 성능을 나타내었다.