• 한국신뢰성학회지:신뢰성응용연구
• /
• 제16권3호
• /
• pp.171-179
• /
• 2016

Purpose: The purpose of this study is to provide a comparison of reliability prediction models between MIL-HDBK-217F and Telcordia SR-332 and to analyze the reliability prediction results. Methods: The reliability of industrial tablet PC was predicted using MIL-HDBK-217F and Telcordia SR-332. To analyze the results, sensitivity analysis was conducted. Results: The reliability of MIL-HDBK-217F was predicted lower than the one of Telcordia SR-332. Considering the factors such as temperature, quality and environment, those provided reliability change of a particular part which highly contribute to the system failure. Conclusion: It is necessary to design the industrial tablet PC that consists of integrated circuits such as microprocessor and memory considering the operating temperature and quality factors.

• 한국통신학회논문지
• /
• 제21권5호
• /
• pp.1332-1344
• /
• 1996

This paper presents a pipelined floating point multiplier(FMUL) for superscalar microprocessors that conbines radix-16 recoding scheme based on signed-digit(SD) number system and new rouding and normalization scheme. The new rounding and normalization scheme enable the FMUL to compute sticky bit in parallel with multiple operation and elminate timing delay due to post-normalization. By expoliting SD radix-16 recoding scheme, we can achieves further reduction of silicon area and computation time. The FMUL can execute signle-precision or double-precision floating-point multiply operation through three-stage pipelined datapath and support IEEE standard 754. The algorithm andstructure of the designed multiplier have been successfully verified through Verilog HOL modeling and simulation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 추계학술대회 논문집 학회본부
• /
• pp.283-287
• /
• 1989

This paper presents a microprocesser based Self-Controller for a Permanent Magnet Synchronous Motor(PMSM), fed by voltage soure inverter. The proper operation of the PMSM can be ensured only if the stator current is always synchronized with the its Back-E.M.F. The use of incremantal encoder with high resolution makes it possible to design a Self-Control led P.W.M. inverter. The pulse ratios are controlled to reduce the torque ripple in the low-speed drive region. And during the operation, torque - speed characteristics are improved by the control of optimal load angle.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.450-452
• /
• 2001

In this paper, we proposed the automatic postal drop-off system based on the microprocessor board or PC. The weight of the small postal package is transmitted from the electronic scale and user-entered addresses and delivery rate are processed by the controller to calculate the fee. For 24 hour out-door operation and maintenance, non-cash payment methods such as credit card payment is used. The post stamp and receipt are printed by the thermal printer. For the electronic processing of the parcel, serial code is also printed on the stamp and receipts in bar code format. The parcel information obtained by the automatic postal drop-off system is transferred to remote central system by dial-up modem shared by the on site office. The proposed system and its control software are built for prototype model operation and the result met the design requirements. For real time processing, data reception through three serial ports is handled by interrupt routine. The proposed system is expected to be applied for commercial logistics system and pc automation system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 B
• /
• pp.776-778
• /
• 1999

In this paper, identifier for thermal storage system using multi-layer feedforward neural network (MFNN) is designed. It is very difficult to control thermal storage system, since thermal storage system is nonlinear and its time constant is very large. Thus, in the MFNN, delta-bar-delta algorithm for high running speed and 2-bit status input are used. Also hardware using microprocessor for identifier is developed. The experimental results indicate that the proposed method can predict temperature more accurately.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 A
• /
• pp.391-393
• /
• 1992

This paper proposes an adaptive control system using a 80286 microprocessor-based system and DC servo motors for the control of flexible joint manipulator. In this paper, we construct the controller based on a singular perturbation strategy damping out the elastic oscillations at the joints. we added to the controller the compensator for damping the joint and the term for decreasing the position error between the actuator and the link in order to improve the asymptotical convergence of the position of the link. It is shown that the implementation of this control algorithm can be practical.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.457-462
• /
• 1991

Recently, digital techniques have been applied to servo systems of the home VCR, which result in high accuracy, high stability and a small number of parts required. The servo systems are now becoming more compex because the latest home VCRs are stringly required to have many functions. Given these circumstances, software servo concepts were introduced to the VCR servo system with microprocessor. But there are some difficulties in the conventional digital PID controller, eg. caculating the exact gains or dynamics. In this paper, we introduce FLC(Fuzzy Logic Controller) to the speed/phase control for VCR drum motor. To show the usefulness of the proposed controller, some studies are discussed by simulation and experiment.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.1308-1311
• /
• 2002

We present a low-power MPEG-4 video codec chip capable of delivering high-quality video data in wireless multimedia applications. The discussion will focus on the architectural design techniques for implementing a high-performance video compression/decompression chip at low power architectures. The proposed MPEG-4 video codec can perform 30 frames/s of QCIF or 7.5 frame/s of CIF at 27MHz for 128k∼144kbps. By introducing the efficiently optimized Frame Memory Interface architecture, low power motion estimation and embedded ARM microprocessor and AMBA interface, the proposed MPEG-4 video codec has low power consumption for wireless multimedia applications such as IMT-2000.

• ETRI Journal
• /
• 제29권4호
• /
• pp.536-538
• /
• 2007

We propose and describe the fabrication of a linear power amplifier (LPA) using a new analog feedforward method for the IMT-2000 frequency band (2,110-2,170 MHz). The proposed analog feedforward circuit, which operates without a pilot tone or a microprocessor, is a small and simple structure. When the output power of the fabricated LPA is about 44 dBm for a two-tone input signal in the IMT-2000 frequency band, the magnitude of the intermodulation signals is below -60 dBc and the power efficiency is about 7%. In comparison to the fabricated main amplifier, the magnitude of the third intermodulation signal decreases over 24 dB in the IMT-2000 frequency band.

• 한국정밀공학회지
• /
• 제21권10호
• /
• pp.94-101
• /
• 2004

This paper presents the development of a keypad test system for the improvement of working environment and productivity using PTC 16F877 microprocessor. In order to detect the fault of keypad products, hardware and software design is performed in this system. Keypad fault detection system is controlled by the 8 bit one chip PIC microcontroller for the exactness and speed. Developed panel of the keypad test system is comprised of the sub-panel for selecting in the inspected keypad types and the main panel f3r displaying the working order and fault position. Furthermore, all data from keypad inspection are stored in main memory of personal computer for the database. All these functions lead to the improvement of working speed and environment.