• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 V
• /
• pp.2729-2732
• /
• 2003

This paper proposes a real-time method to recognize shoulder elevation motions by comparing EMG signals on the Levator scapulae muscles with double threshold values. To achieve real-time, we implement a EMG signal processing hareware embedded band-rejection filter, low-pass filter, full rectifier and moving average circuits. And a high speed microprocessor is used for implementing the double thresholds method. The available shoulder motions for the human-computer interface are elevation of left, right and both shoulders. From experimental results we show that the proposed real-time processing hardware and double thresholds method are useful for the real-time EMG-based human-computer interface.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(2)
• /
• pp.423-426
• /
• 2004

본 논문에서는 저 전력 마이크로프로세서를 개발하기 위해 ARM7 마이크로프로세서와 명령어 호환을 갖는 32비트 RISC 구조의 마이크로프로세서를 설계하였다. 저 전력 ARM7 마이크로프로세서 IP 구현을 위하여 새로운 정수 나눗셈 명령어를 정의하고 이를 적용하는 회로를 설계하여 제수가 피제수보다 큰 경우 6.4nW, 그 이외의 경우에는 76.5 nW를 소모하여 기존의 방법보다 $140{\~}860\%$ 까지 개선되었음을 측정하였다. 또한 Multi-cycle 명령어 발생시 Prefetch에 의한 전력 소모를 줄이기 위하여 명령어의 condition code를 미리 결정함으로써 $50\%$의 prefetch 동작 횟수를 줄였다. 그 결과 저 전력 파이프라인의 경우에는 1.943mW/1MHz의 소비 전력이 측정되었다.

• 대한전자공학회논문지SD
• /
• 제46권8호
• /
• pp.12-17
• /
• 2009

마이크로프로세서를 사용하여 디지털 방식에 의해 온도보상을 하는 버스트 모드 광송신기를 구현하였다. 기존 실시간으로 신호를 처리하는 아날로그 방식의 온도보상 방법에 비하여, 본 연구에서 구현한 디지털 방식의 온도보상은 신호를 샘플링 처리함으로써 고속 버스트 모드 광신호를 효과적으로 처리할 수 있다. 온도보상을 위한 디지털 자동전력조절 방식은 데이터 전송속도에 영향을 받지 않을 뿐만 아니라, 아날로그 방식에 비해 보다 정확하고 효율적이므로 Gb/s 이상의 고속 버스트 광신호 처리에 유용하게 사용될 수 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 추계학술대회 논문집 학회본부
• /
• pp.219-222
• /
• 1991

It is difficult to adapt modern control theory to power conversion system for the price of real time control H/W and the difficulty of S/W implementation. But recent development of large integrated circuit make it possible that One-Chip microprocessor processes high speed arithmatic calculation used in control theory. Specially this chip is called Digital Signal Processing chip. So, this research developes high performance, high reliable digital control system using TMS320C30 of Texas Instrument for real time control in power conversion system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.415-419
• /
• 1996

This paper presents motor speed and phase angle detection method using a sinusoidal AC tachogenerator. The 2-phase or 3-phase output tacho-generator can be adopted, and its' output voltages must have sinusoidal waveforms. Because the detection algorithm is simple, the proposed method can be implemented with analog devices of microprocessor conveniently. And the proposed method has a very short detection delay time. Especially in the analog implementation, there is no delay time without the settling time of analog devices. With the Experimental results, it is verified that the proposed method can accurately detect the instantaneous motor speed and phase over the wide ranges.

• 전자공학회논문지S
• /
• 제34S권12호
• /
• pp.50-59
• /
• 1997

A wireless LAN medical information transmission system is useful for patients who need mobility in a local area environment. This paper proposes a method using WLAN(wireless local area network) and implements a stand-alone system with MAC(meidum access control) layer protocol referenced IEEE 802.11 draft standard. The system consists of a 8bit-microprocessor which handles media access control protocol and a WL100(GEC Plessey) chip which takes care of phsical layer specific routines and uses a RF module DE6003(GEC Plessey). The major features of the implemented system are the CSMA/CA protocol used a consecutive DATA-ACK trasmission method which yields more effective bandwidth allocation for asyncronous traffic transmission and the modified PCF protocol for time-bounded traffic transmission, which operates in ad-hoc network topology apart from IEEE 802.11 draft standard confirm PCF mode operate in infrastruture topology.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.2193_2194
• /
• 2009

A digital over current relay(OCR) is realized by using TMS320C32 microprocessor. Fourier Transform is used to obtain the phasor of a current signal and a 2nd low pass filter is adopted to prevent aliasing error. H/W test shows almost same results with those of the S/W test. It could be possible that confirm simularity between H/W and S/W test in this paper.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권3호
• /
• pp.437-445
• /
• 2008

This paper deals with the experimental assessment of the vibration suppression of the smart structures. First. we have presented a new high-speed active control system using the DSP320C6713 microprocessor. A peripheral system developed is composed of a data acquisition system, N/D and D/A converters, piezoelectric (PZT) actuator/sensors, and drivers for fast data processing. Next, we have tested the processing time of the peripheral devices, and provided the corresponding test results. Since fast data processing is very important in the active vibration control of the structures, we have focused on achieving the fast loop times of the control system. Finally, numerous experiments were carried out on the aluminum plate to validate the superior performance of the vibration control system at different control loop times.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.435-438
• /
• 2004

Lately, the Intelligent Electronic Device(ED) and the Power System Automation make subjects of discussions and studies. The IED uses microprocessors to practice a lot of functions. In the analog time, an equipment practices only one or two functions. But according to the development of microprocessor and digital technology, it can be implemented by using those kinds of state of the art technology and its function is become more and more powerful. Also, the proliferation of IED makes possible to construct power system automation. An automation of power system make more convenient, safe, and accurate power system. In this paper, a digital protective relay which is a kind of IED and the power automation system are briefly discussed with development and application cases.

• 전력전자학회논문지
• /
• 제3권3호
• /
• pp.240-245
• /
• 1998

본 논문에서는 전동기의 슬라이딩 모드 제어기가 설계되었다. 슬라이딩 모드 제어기의 단점인 채터링 현상을 제거하기 위해 연속치 제어입력이 제안되었으며 제안된 기법으로 고속 마이크로 프로세서인 DSP를 이용한 유도전동기의 속도제어를 보였다. 슬라이딩 모드하에서의 유도 전동기의 각속도가 지정된 궤적을 추종하도록 동작한다. 실험 결과를 통해 제안된 방법의 유용성을 보였다.