• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(2)
• /
• pp.333-336
• /
• 2002

This paper purpose design and implementation of system bus for the effective interconnection between peripheral device and 32-bit microprocessor. The designed system bus support general bus protocol. Also, it is optimized for 32-bit microprocessor. It is divided into two system. high performance system bus and Peripheral system bus.

• 정보학연구
• /
• 제9권1호
• /
• pp.33-39
• /
• 2006

This study is for the contents of development to the hardware system and software driving algorithm to implement the frequency band of about 7KHz los pass digital filter which has the cut-off frequency of 392Hz by interfacing of a microprocessor with its peripheral analog-to-digital converter chip and digital-to-analog converter chip. The simplicity of digital filter design without difficulty and the implementation of programmed digital filter can be realized by providing the interfacing method to implement the law pass digital filter for the biological signals and the realization method of computer algorithm by a microprocessor.

• 대한전기학회논문지
• /
• 제41권3호
• /
• pp.281-291
• /
• 1992

This paper deals with the digital autopilot implementation for a launch vehicle. We propose a hardware and software system for digital autopilot implemented by microprocessor. The hardware system designed in this paper consists of CPU and memory board with 80286 MPU and 80287 NPU and I/O interface with A/D and D/A converters. The software system developed is composed of power-on self-test program, initializing program, interrupt service program, and control program. The performance of the overall system controlled by the digital autopilot implemented in this paper is evaluated via real-time simulations, which show that the control performances are satisfactory.

• 한국정보통신학회논문지
• /
• 제4권1호
• /
• pp.283-288
• /
• 2000

본 논문은 마이크로프로세서를 이용하여 구현하는 전파브리지 인버터의 새로운 PWM 제어 방법을 제안한다. 이 방법은 단방향 전파 브리지 인버터의 한 주기를 주파수 변조비로 등간격 분할하고 기준 기본파와 인버터의 출력 기본파의 진폭을 비교하는 PWM 제어 방법이다. 이 방법을 이용하면 각 간격의 turn-on time 계산이 매우 용이하여 마이크로프로세서 구현에 매우 적합하다. 그리고, 고조파 해석에 있어서 주파수 변조비가 크면 모든 고조파를 무시할 수 있음을 보여준다 시뮬레이션과 실험을 통하여 타당성을 입증하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 V
• /
• pp.2637-2640
• /
• 2003

In this paper, we propose a simple and efficient data input/output block with high speed between Motorola MPC8XX microprocessor and memory devices. Proposed method is capable of high speed data read and write using the address decoder and the burst cycle between Motorola PowerPC based MPC8XX microprocessor and fixed address locating memory devices such as FIFO, PCMCIA card, and so on. Experimental results are given our findings and discussions.

• 한국소음진동공학회논문집
• /
• 제14권6호
• /
• pp.455-462
• /
• 2004

This paper is concerned with the implementation of the active vibration suppression controller using analog circuit and microprocessor. The target active vibration controller is the positive position feedback(PPF) controller since it provides a simple algorithm suitable for both analog circuit and digital controllers. In this study, the analog PPF controller is realized using an operational amplifier and the digital PPF controller is realized using a low-cost micro-controller. The circuit diagrams are explained in detail. We then discuss the advantages and disadvantages of both methods from the view of practical implementation. Experimental results show that both implementation methods can be effectively used for the active vibration control but need to be chosen based on the mission objective.

• 대한전자공학회논문지
• /
• 제18권3호
• /
• pp.35-41
• /
• 1981

최근에 활발히 연구되고 있는 model reference adaptive control 이론을 microprocessor를 사용하여 직류전동기의 속도제어에 적용할 수 있음을 보였다. 본 논문에서는 일차로 근사시킨 reference model을 설정하고 model의 output과 motor의 output의 처리가 영에 수렴하도록 하였다. 먼저 computer simulation에 의해 reference 입력과 부하의 변동에 따른 출력을 살펴본 후 microprocessor M 6800을 이용하여 직류전동기를 제어하였는데 input 및 부하의 급격한 변동에 잘 적용하는 특성을 보여 주었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제16권4호
• /
• pp.102-112
• /
• 1992

The three-phase full(6-pulse) bridge controlled rectifier is one of the most widely used types of solid-state converters in DC drive applications for higher performance. In most of the previous designs, the gate control circuits of the converter have been designed with analog method which can be easily affected by noise. Nowdays with advances of microelectronics and power electronics, microprocessor and pheripal LSIs are increasingly used for eliminating this problems. In this paper, a novel general-purpose microprocessor -based firing system and control scheme for a three-phase controlled rectifier bridge has been developed and tested. Using the phase relations between ${\Delta}$-Y transformer in power operation part, gate pulse of the converter is generated with real time process so that microprocessor may share its time to control algorithms efficiently. The firing angle of the converter is smoothly controlled in the range of 0 $^{\dirc}$ to 180$^{\dirc}$ with a fast respone and a constant open loop gain, even for the case where the converter is fed by a weak AC system of unregulated frequency. The hardware and software control circuit implementation built around a 80286 microprocessor is discussed, and the experimental results are given. This scheme uses less hardware components and has higher dynamic performance in variable speed DC drive applications.

• 조명전기설비학회논문지
• /
• 제19권8호
• /
• pp.109-115
• /
• 2005

이 논문은 자동차에서 제어 네트워크로 이미 신뢰성이 확인된 CAN(Controller Area Network) 필드버스를 산업계 복수전동기 제어에 적용하기 위하여 지능형 제어모듈로 CAN이 내장된 DSP2812 프로세서를 이용하여 제어 및 모니터링기술을 개발하였다. 산업계에 광범위하게 사용되고 있는 유도전동기를 대상으로 여러 대의 유도전동기를 제어하기 위한 제어 알고리즘과 CAN 기반제어네트워크 구축방법을 개발하였다. 이 시스템 성능을 평가하기 위하여 2대의 유도전동기 인버터 구동시스템에 적용하여 CAN 기반 네트워크 제어 실험을 수행하였다. 그 결과 광범위한 속도와 정역회전에서 실시간 네트워크 기반 제어성능을 확인하였다.

• 산업기술연구
• /
• 제30권B호
• /
• pp.119-123
• /
• 2010

LC-3 is an educational microprocessor for processor logic design, instruction execution fundamentals, and assembly language programming. This paper presents an IDE software, LIDE (LC-3 Integrated Development Environment), which integrates assembly program editor, LC-3 assembler, and LC-3 simulator.