• 센서학회지
• /
• 제15권3호
• /
• pp.158-163
• /
• 2006

This paper reports a novel immunoassay method using superparamagnetic nanoparticles and an enhanced magnetic field gradient for the detection of protein in a microfluidic device. We use superparamagnetic nanoparticles as a label and fluorescent polystyrene beads as a solid support. Based on this platform, magnetic force-based microfluidic immunoassay is successfully applied to analyze the concentration of IgG as model analytes. In addition, we present ferromagnetic microstructure connected with a permanent magnet to increase magnetic flux density gradient (dB/dx, ${\sim}10^{4}$ T/m), which makes limit of detection reduced. The detection limit is reduced to about 1 pg/mL.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1688-1689
• /
• 2011

A simple and rapid capillary electrophoresis method was developed for the quantitative analysis of common triazine herbicides. Cyclic voltammetry was employed to clarify the detection voltage which showed characteristic irreversible cathodic peaks. For the analysis, the mixture of triazine herbicides was applied in a microfluidic chip to determine the CE-separated peaks. Soil sample extracts were analyzed directly after drying and redissolution with the supporting electrolyte but without other pretreatment. The results were comparable to those obtained by HPLC with UV detection. Therefore, this method can be used in the rapid determination of pesticide/herbicide residues.

• 센서학회지
• /
• 제17권4호
• /
• pp.245-249
• /
• 2008

This paper presents a microfluidic cell sizing method using hydrophoretic size-based separation. By exploiting slanted obstacles in a microchannel, we can generate a lateral pressure gradient so that microparticles can be deflected and arranged along lateral flows induced by the gradient. Using such movement of particles, we discriminated 8 to 15 μm-sized beads. We measured the size of U937 cells by comparing the hydrophoretic response of the cells to those of the size-standard beads whose diameters are known. Due to its simple design and fabrication, the sizing method can be easily integrated with other microfluidic components such as cell culture chambers conducting on-chip sizing and sorting.

• 한국전기전자재료학회논문지
• /
• 제16권12호
• /
• pp.1097-1102
• /
• 2003

In this paper, we used only PR as etching mask, while it used usually Cr/AU as etching mask, and in order to fabricate a photosensor has the increased sensitivity, we investigated on the sensitivity of general type and p-i-n type diode. we designed microchannel size width max 10um, min 5um depth max 10um, reservoir size max 100um, min 2mm. Fabrication of microfluidic devices in glass substrate by glass wet etching methods and glass to glass fusion bonding. The p-i-n diode has higher sensitivity than photodiode, Considering these results, we fabricated p-i-n diodes on the high resistive(4㏀$.$cm) wafer into rectangle and finger pattern and compared internal resistance of each pattern. The internal resistance of pin diode can be decreased by the application of finger pattern has parallel resistance structure from 571Ω to 393Ω.

• Molecular & Cellular Toxicology
• /
• 제2권4호
• /
• pp.279-284
• /
• 2006

This paper describes the fabrication methods of a carbon nanotube (CNT) filter and a microdialysis chip. A CNT filter can help perform dialysis on a microfluidic chip. In this study, a membrane type of a CNT filter is fabricated and located in a microfluidic chip. The filter plays a role of a dialysis membrane in a microfluidic chip. In the fabrication process of a CNT filter, individual CNTs are entangled each other by amide bonding that is catalyzed by 1-Ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC) and N-hydroxysuccinimide (NHS). The chemically treated CNTs are shaped to form a CNT filter using a PDMS film-mold and vacuum filtering. Then, the CNT filter is sandwiched between PDMS substrates, and they are bonded together using a thin layer of PDMS prepolymer as adhesive. The PDMS substrates are fabricated to have a microchannel by standard photo-lithography technique.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.419-422
• /
• 2002

A three-dimensional inlet flow structure inside a microfluidic element has been investigated using a micro-PIV(particle image velocimetry) measurement as well as a numerical analysis. The present study employs a state-of-art micro-PIV system which consists of epi-fluorescence microscope, 620nm diameter fluorescent seed particles and an 8-bit megapixel CCD camera. For the numerical analysis, a commercial software CFD-ACE+(V6.6) was employed for comparison with experimental data. Fixed pressure boundary condition and a 39900 structured grid system was used for numerical analysis. Velocity vector fields with a resolution of $6.7{\times}6.7{\mu}m$ has been obtained, and the attention has been paid on the effect of varying measurement conditions of particle diameter and particle concentration on the resulting PIV results. In this study, the microfluidic elements were fabricated on plastic chips by means of MEMS processes and a subsequent melding process.

• 한국환경농학회:학술대회논문집
• /
• 한국환경농학회 2009년도 정기총회 및 국제심포지엄
• /
• pp.187-199
• /
• 2009

We present real.time, rapid detection of Mycoplasma pneumonia in phosphate buffered saline (PBS) inside a Y.channel polydimethylsiloxane (PDMS) microfluidic device by means of optical fiber monitoring of latex immunoagglutination. The latex immunoagglutination assay was performed with serially diluted Mycoplasma pneumonia solutions using highly carboxylated polystyrene particles of 390nm and 500nm diameter conjugated with monoclonal anti. Mycoplasma pneumonia . Proximity optical fibers were located around the viewing cell of the device, which were used to measure the increase in 45${\b{o}}$ forward light scattering of the immunoagglutinated particles. The detection limit was less than 50 $pgml^{-1}$ both for 390nm and 500nm microspheres with the detection time less than 90 seconds.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2001년도 Proceedings of 2001 Korea-Japan Joint Seminar on Particle Image Velocimetry
• /
• pp.44-52
• /
• 2001

A micro-PIV(particle image velocimetry) measurement has been conducted to investigate flow fields in such microfluidic devices as microchannels and micronozzle. The present study employs a state-of-art micro-PIV system which consists of epi-fluorescence microscope, 620nm diameter fluorescent seed particles and an 8-bit megapixel CCD camera. Velocity vector fields with a resolution of $6.8\;\times\;6.8{\mu}m$ has been obtained, and the attention has been paid on the effect of varying measurement conditions of particle diameter and particle concentration on the resulting PIV results. In this study, the microfluidic elements were fabricated on plastic chips by means of MEMS processes and a subsequent molding process. Flow fields in a variety of microchannels as well as micronozzle have been investigated.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1450-1454
• /
• 2008

In the conventional biology, the most of cell studies was carried out by culturing cells in the Petri dish and by investigating cellular behavior under the diverse bio-molecule (cell signalling materials, drugs or etc.) conditions. However, in vivo environments, diverse stimulations including chemical, mechanical and topological environments involved in the proliferation, differentiation and migration of cells and it is almost impossible to provide these conditions with traditional method. We have developed the methods to provide the well defined chemical and mechanical stimulations using microfluidic devices and applied these approaches to the study of environmental effect on cells. In this paper, we will introduce our microfluidic chips to provide microenvironment and its applications using several cells.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1687-1689
• /
• 2008

In the detection of pathogenic microorganisms ATP-bioluminescence reaction is a fascinating method. ATP(adenosine triphosphate) is an energy source of all kinds of living organism and ATP-bioluminescence reaction uses this ATP. However, ATP exists not only in the cells but also outside the cells. Therefore ATP-bioluminescence reaction only with intracellular ATP is very important in pathogenic microorganism detection. Because of that reason we developed a microfluidic channel containing Dielectrophoretic zone which capture microorganisms and eliminating and washing extracellular ATP with ATP-degarading enzymes, adenosine phosphate deaminase and apyrase. Microorganisms are captured by pDEP force at the DEP electrode zone and only extracellular ATPs are washed and eliminated outside the zone.