• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1999.10a
• /
• pp.72-82
• /
• 1999

The microearthquake and explosion events recorded in the seismic KNUE(Korea National University of Education) network were analyzed. The seismic data were recorded from Dec. 1997 to Dec. 1998. Total of 118 records consisted of 24 earthquake and 4 explosion events were instrumented at 6 stations. Spectral values increases as magnitude increases and the predominant frequency band expands to low frequency. zone as magnitude increases. Three-dimensional spectrograms(time frequency. amplitude) were also synthesized in order to discriminate microearthquakes and artificial underground explosions. The waves from microearthquakes show that frequency content of dominant amplitude appeared above 10 Hz and the discrimination can be performed in almost all the frequency domain of 3-d spectrogram.

• The Journal of Engineering Geology
• /
• v.7 no.1
• /
• pp.63-79
• /
• 1997

In this study, our purpose is to develop a technique to discriminate artificial explosions from local microearthquakes on the basis of time-frequency domain. To obtain spectral features of artificial explosions and microearthquakes, we used 3-d spectrograms(frequency, time and amplitude) because this is a useful tool to study the frequency content of entire seismic waveforms observed at local and regional distances (e. g., Kim et al., 1994). P and S waves from quarry blasts show that frequency content of dominant amplitude appeared above 10 Hz and Rg phases that are observed at near distance ranges. But P and S waves from microearthquakes have more broad frequency content as well as below 10 Hz. And for discrimination, Pg/Lg spectral ratio is performed below 10 Hz. In order to select time windows we computed group velocity using multiple filter method(MFM) and removed free surface effects from all 3-components data for improving on data quality. Next step, we computed Fast-Fourier transform, and a log average spectral amplitude over seven frequency bands : 0.5 to 3, 2 to 4, 3 to 5, 4 to 6, 5 to 7, 6 to 8 and 8 to 10 Hz. The best separation is observed from 6 to 8 Hz.

• Journal of the Korean Geophysical Society
• /
• v.2 no.4
• /
• pp.235-240
• /
• 1999

From the seismic network data of the Korea Institute of Geology, Mining & Materials during 1995-1996, we derived a composite fault-plane solution of the microearthquakes occurred in the Yangsan fault area. The composite fault-plane solution of nine events shows the orientation of fault 15 ± 3°in strike, 60 ± 8°in dip and 140°in rake or 128 ± 3°in strike, 56 ± 8°in dip and 37°in rake. The compressional axis of the stress field trends ENE to WSW, and this field suggests strike-slip motion with thrust component. The result is consistent with the 1996 Yeong-weol event and the stress field in and around the Korean Peninsula, previously reported.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1999.10a
• /
• pp.45-51
• /
• 1999

The attenuations of peak vertical displacements are studies using a conventional least squeare regression technique for microearthquakes occurred in the Kyungsang Basin southeastern Korea. The regression model applied to bandpass-fitered ground motion data includes parameters to account for geometric spreading anelastic attenuation depending on frequency source size and station site effects. Thirty nine displacement traces obtained by integrating velocity records for six shallow local microearthquakes are used to determine attenuation characteristics in the Basin. The regression result of the peak amplitude data leads to Q(f)=59.9 {{{{ {f }^{0.955 } }} for 1.5Hz$\leq$ f $\leq$ 25 Hz. It appears that the anelastic attenuation in the Kyungsang Basin is greater than that in the Western North America Area.

• The Journal of Engineering Geology
• /
• v.4 no.1
• /
• pp.29-42
• /
• 1994

Discrimination studies between microearthquakes and underground explosions are carried out in the pure-continental path of north-south within the Korean Peninsula. The characteristic waveforms for explosions and microearthquakes are investigated in the light of observation and synthetic seismograms. The characteristic waveform generation is minnly a function of source mechanism and ray-path and former influences more strongly than the latter.A double-couple source mechanism for microeatthquakes and a single-couple(force) mechanism for explosions are presented in this study. It is found for very shallow events to have outstanding of $L_g$ waves in the transverse components that pass through the upper crust with period of 1 - 6 seconds and fundamental modes of Rayleigh waves, $R_g$ in the vertical component with period 8-12 seconds. Furthermore it is pointed out that the first arrival amplitudes of SH waves for explosions are always srnall regardless of azimuth of stations since there is non-existence of nodal lines for the explosion mechanism. Theoretical seismograms for explosions show the first motions of compression with short wavelengths as well as mostly fundamental modes of Rayleight waves, $R_g$ waves and $L_g$ waves, whereas those of micro-earthquakes give either compression or dilatation according to the ack azimuth epicenter to stations and poor or non $R_g$ waves and complicated $L_g$ waves, depending on the focal depth.

• Economic and Environmental Geology
• /
• v.21 no.2
• /
• pp.185-191
• /
• 1988

A two channel seismic recorder suitable for long-term observation of microearthquakes is developed. The direct analogue recording on cassette tape is adopted in the recorder whose circuits of amplifier and mortor units of an audio cassette recorder are modified. The recorder provides contineous record of 10 days with DC 12V battery (100AH) and with standard cassette tape of 60 minute use. The binary coded time signals of date, hour, and minute are generated once a minute by the timing system and absolute time input using radio to measure the time drift is also possible. For the seismic signal processing, the analogue signals from audio cassette player pass A/D converter and digitized data are stored in personal computer. Then visual records can be obtained using computer graphic mode. Basic programs "ADCONVO" and "DRAWO" to accomplish A/D conversions, the creation of data files and visualization of signals were written. Some sample signals reproduced from the recorded tape are presented.

• Journal of the Korean Geophysical Society
• /
• v.2 no.1
• /
• pp.1-8
• /
• 1999

Using the microearthquake data acquired from 1995 to 1996 through the seismic network operated by the Korea Institute of Geology, Mining & Materials (KIGAM), the three P-wave velocity models proposed by Lee (1979), Kim·Kim (1983) and Kim·Jung (1985) concerning the structure of the southeastern part of the Korean peninsula were examined in terms of the least square errors of the P-wave arrival times. The three models do not differ significantly in arrival time residuals except that the Lee's model gives slightly deeper focuses than the others. The layering of the crust of the peninsula is not clear as yet and to be studied by more earthquake and explosion data in the future.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2000.10a
• /
• pp.27-32
• /
• 2000

Microearthquake records with magnitude 2.6~3.1 recorded in the southeastern part of the Korean peninsula during 1994~1998 are analyzed. Total of 42 records consisted of 12 events instrumented at 7 stations. The response spectra with the above data shows that the frequency range of the dominant response is about 10~25Hz and are compared with the standard response spectrum. The result implies that the characteristics of the microearthquake ground motion differ from those of standard response spectrum presented in US NRC Reg. Guide 1.60 especially at higher frequencies.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 1995.03a
• /
• pp.108-108
• /
• 1995

There are always some difficulties to discriminate artificial exlposions from micro-earthquakes, furthermore more difficulties to identify and determine decoupled explosions and/or multiple explosions from micro-earthquakes. In this study we use the synthetic seismogram of the in homogeneous models between the source and the observation station in order to find the source effect of the geological environment. We have found some source characteristics of the air-filled and/or water-filled cavity that we can hardly see P-n and S- waves arrivals and that the high frequency coda waves are well observed compared to the coupled explosions or earthquakes.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.8
• /
• pp.1179-1185
• /
• 2012

This paper presents a new approach for the detection of seismic events using accumulated changes on time-frequency domain and variable threshold. To detect seismic P-wave arrivals with rapidness and accuracy, it is that the changes on the time and the frequency domains are simultaneously used. Their changes are parameters appropriated to reflect characteristics of earthquakes over moderate magnitude(${\geq}$ magnitude 4.0) and microearthquakes. In addition, adaptively controlled threshold values can prevent false P-wave detections due to low SNR. We tested our method on real earthquakes those have various magnitudes. The proposed algorithm gives a good detection performance and it is also comparable to STA/LTA algorithm in computational complexity. Computer simulation results shows that the proposed algorithm is superior to the conventional popular algorithm (STA/LTA) in the seismic P-wave detection.