• 마이크로전자및패키징학회지
• /
• 제27권3호
• /
• pp.1-8
• /
• 2020

In this paper, the principles, characteristics and recent studies of the laser micro soldering are reviewed. The factors which influence laser micro welding and soldering are also included. Laser soldering is a non-contact process that transfers energy to solder joint by a precisely controlled laser beam. In recent electronics industry, the demands for laser soldering are increasing due to bonding for complex circuits and local heating in micro-joint. In laser soldering, there are several important factors like laser absorption, laser power, laser scanning speed, and etc, which affect laser solderability. The laser absorption ratio depends on materials, and each material has different absorption or reflectivity for the laser beam, which requires fine adjustment of the laser beam. Laser types and operating conditions are also important factors for laser soldering performance, and these are also reviewed.

• 마이크로전자및패키징학회지
• /
• 제26권3호
• /
• pp.7-13
• /
• 2019

In this paper, the principles, types and characteristics of the laser and laser soldering are introduced. Laser soldering methods for electronics, metals, semiconductors are also presented. Laser soldering is a non-contact process that transfers energy to solder joint by a precisely controlled beam. Demands for laser soldering are increasing due to bonding for complex circuits and local heating in micro joint. Laser absorption ratio depends on materials, and each material has different absorption or reflectivity of the laser beam, which requires fine adjustment of the laser beam. Laser types and operating conditions are also important factors for laser soldering performance. In this paper, the performance of Nd:YAG laser soldering is compared to the hot blast reflow. Meanwhile, a diode laser gives different wavelength and smaller parts with high performance, but it has various reliability issues such as heat loss, high power, and cooling technology. These issues need to be improved in the future, and further studies for laser micro-joining and soldering are required.

• Corrosion Science and Technology
• /
• 제8권5호
• /
• pp.184-187
• /
• 2009

The trend of the microjoining technology by the laser-soldering process has been reviewed. Among the production technologies, joining technology plays an important role in the fabrication of electronic components. This has led to an increasing attention towards the use of modern microjoining technology such as micro-resistance spot joining, micro-soldering, micro-friction stir joining and laser-soldering, etc. This review covers the recent technical trends of laser-soldering collected from the COMPENDEX DB analysis of published papers, research subject and research institutes.

• Journal of Welding and Joining
• /
• 제13권4호
• /
• pp.14-23
• /
• 1995

Micro soldering 기술의 응용은 주로 전자제품에 이용되며, 특히 컴퓨터 정보 통신 기기의 집합.접속 기술의 중추적인 역할을 하고 있다. 아울러 이 분야는 일본, 미국이 선구적인 역할을 하고 있으며, 예를 들어 일본 전자산업의 1994년도 생산액이 앤 고의 열쇠에 불구하고 민생용.산업용 전자기기 및 전자 부품의 3부분에서 약 .yen.30조(250조원)에 달한 것으로 보면 그 규모 및 중요성을 알 수 있다. 이것은 기본 적으로 반도체의 집적도가 높아진것(LSI.rarw.VLSI.rarw.ULSI)과 아울러 소자를 접합 접속시키는 기술이 확보되었기 때문에 이루어진 결과라고 말할 수 있다. 따라서 본 기술 해설에서는 접합.접속 기술의 하나인 Micro soldering의 각종 프로세스 중에서 도 특히 기본이 되는 리플로우 프로세스(reflow process)를 중심으로 기술하였으며 아울러 신뢰성의 제반사항에 관하여 간략하게 기술하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.661-662
• /
• 2006

This research is on a laser soldering using the micro solder-balls used in flip chip packaging process. A laser source used in laser soldering is Nd:YAG laser(250W and 60W). Solder-balls of 100, 300, $500{\mu}m$ size are used in experiments. The laser head to deliver a laser beam and the nozzle to transfer solder-balls are manufactured to bump solder-balls. After soldering solder-balls the shear test is carried out to determine the wetting at the interface between the surface and a solder-balls With the results of solder bumping tests a laminated molding is accomplished for manufacturing the three dimensional molding.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1997년도 전력전자학술대회 논문집
• /
• pp.318-321
• /
• 1997

This paper is about improving characteristic of plant by using micro-step driver method in 5 phase step motor for satisfying the condition of low oscillation and high accuracy in soldering machine. We choose open loop control method for minimizing hardware system and use one chip microprocessor, power MOSFET nd some device to realize accurate micro-step driver system.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.97-100
• /
• 1998

In this paper, micro step driving method is used for the high performance motion control and low vibration and low noise in an X-Y axis soldering machine for factory automation. The improvement of the electrical and mechanical driving characteristic of a stepping motor is achieved by applying microstep driver.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2004년도 추계학술발표대회 개요집
• /
• pp.79-81
• /
• 2004

In this study EB(Electron Beam) welder was modified to apply Ef welder to micro-joining for soldering and micro-brazing. The power and beam current of EB welder is 6kW, 100mA(60kV) and the minimum current was 1mA. The minimum current of EB welder was modified to decrease the amount of beam current to 0.0lmA and the monitoring system to observe materials was made up. The system is developed including teaching function for generating patterns. The control system and CAD/CAM software for EB direct writing was developed and the deflection beam was controlled without moving workpieces. the possibility of applying EB welder to micro-joining for soldering and brazing was studied through this experiments.

• 마이크로전자및패키징학회지
• /
• 제7권3호
• /
• pp.55-61
• /
• 2000

직경 0.3 mm의 Sn-37Pb 및 Sn-3.5Ag-0.7Cu 솔더볼을 솔더링 온도와 기판의 이송속도 (conveyer speed)를 변화시켜 가며 리플로 솔더링 하였다. 리플로 솔더링 온도범위는 Sn-37Pb의 경우 220~$240^{\circ}C$, Sn-3.5Ag-0.7Cu의 경우는 230~ $260^{\circ}C$로 하였다. 실험결과, 전단강도 측면에서 최적 솔더링 조건을 Sn-37Pb의 경우 솔더링 온도 및 컨베이어 속도가 각각 $230^{\circ}C$, 0.7~0.8 m/min이고, Sn-3.5Ag-0.7Cu의 경우 각각 $250^{\circ}C$, 0.6 m/min으로 나타났다. 또한 최고 전단강도 값은 Sn-37Pb의 경우는 555 gf 이고 Sn-3.5Ag-0.7Cu의 경우는 617gf이다. 접합계면의 분석결과 Cu6Sn5층의 두께는 Sn-37Pb의 경우는 1.13~1.45 $\mu\textrm{m}$이고 Sn-3.5Ag-0.7Cu의 경우는 2.5~4.3 $\mu\textrm{m}$이다.

• 한국재료학회지
• /
• 제22권4호
• /
• pp.169-173
• /
• 2012

Recently, various attempts to produce a heat sink made of Al 6xxx alloys have been carried out using die-casting. In order to apply die-casting, the Al alloys should be verified for die-soldering ability with die steel. It is generally well known that both Fe and Mn contents have effects on decreasing die soldering, especially with aluminum alloys containing substantial amounts of Si. However, die soldering has not been widely studied for the low Si aluminum (1.0~2.0wt%) alloys. Therefore, in this study, an investigation was performed to consider how the soldering phenomena were affected by Fe and Mn contents in low Si aluminum alloys. Each aluminum alloy was melted and held at $680^{\circ}C$. Then, STD61 substrate was dipped for 2 hr in the melt. The specimens, which were air cooled, were observed using a scanning electron microscope and were line analyzed by an electron probe micro analyzer. The SEM results of the dipping soldering test showed an Al-Fe inter-metallic layer in the microstructure. With increasing Fe content up to 0.35%, the Al-Fe inter-metallic layer became thicker. In Al-1.0%Si alloy, the additional content of Mn also increased the thickness of the inter-metallic layer compared to that in the alloy without Mn. In addition, EPMA analysis showed that Al-Fe inter-metallic compounds such as $Al_2Fe$, $Al_3Fe$, and $Al_5Fe_2$ formed in the die soldering layers.