• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.228-229
• /
• 2000

1970년 Ashkin이 레이저 광압을 이용하여 수 마이크로미터 크기(micrometer sized)의 유전체를 광속의 진행 방향으로 가속시킴과 동시에 광속축(beam axis)방향으로 입자를 끌어당기는데 성공함으로써 레이저를 이용한 미세구(micro-particle) 의 포획 및 조작에 대한 연구와 실험이 시작되었다$^{[1]}$ . 이후에 많은 사람들에 의해 연구가 활발히 이루어졌으며$^{[2]~[7]}$ , 이러한 레이저를 이용한 미세구의 포획방법은 광집게(optical tweezer)로써 생물학과 물리학 분야에서의 높은 가능성 때문에 지금도 연구가 계속되고 있다. (중략)

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.5 no.4
• /
• pp.21-26
• /
• 2006

Characteristics of texture and groove precision lapping plate are experimentally investigated by Measuring frictional forces. It is found that the frictional coefficient decreases as the embedding of diamond particles progresses. The groove precision lapping plate with concentric micro-channels indicates superior capability in embedding micrometer-sized diamond particles and uniformity in diamond embedding compared with the texture precision lapping plate with a series of circular micro-channels.

• Korean Journal of Environmental Biology
• /
• v.18 no.1
• /
• pp.21-31
• /
• 2000

We investigated seasonal variation of microalgal assemblages, sea water temperature, salinity and suspended solid and the parameters measured daily from January 1998 to October 1999 at a nearshore shallow-water in Marian Cove, Maxwell Bay, King George Island, the Antarctic. Annual mean surface water temperature was -0.3$0^{\circ}C$ and the highest water temperature was 4.53$^{\circ}C$ (22 January 1999) and the lowest water temperature was -2.07$^{\circ}C$ (23 August 1998). Annual mean salinity was 33.38 psu, ranging from 42.80 psu (6 January 1999) to 19.50 psu (6 June 1999). Annual mean suspended solid (SS) during two years was 34.14 mgㆍ1$^{-1}$, ranging from 60.62 mgㆍ1$^{-1}$(7 March 1998) to 12.90 mgㆍ1$^{-1}$ (26 December 1998). Chlorophyll $\alpha$ (Chl $\alpha$) concentrations were measured in order to know seasonal variations of microalgae in the surface seawater. Annual mean of total Chl a concentration was 0.55$\mu\textrm{g}$ㆍ1$^{-1}$, the highest Chl $\alpha$ concentration (12.16$\mu\textrm{g}$ㆍ1$^{-1}$) appeared in 4 October 1998, the lowest Chl $\alpha$ concentration appeared 0.19$\mu\textrm{g}$ㆍ1$^{-1}$, Monthly mean total Chl $\alpha$ concentration was high in October 1998 (1.32$\mu\textrm{g}$ㆍ1$^{-1}$) and low in July on 1998 (0.28$\mu\textrm{g}$ㆍ1$^{-1}$). Annual mean nano-sized Chl $\alpha$ concentration was 0.40$\mu\textrm{g}$ㆍ1$^{-1}$, monthly mean nano -sized Chl $\alpha$ concentration was high in November 1998 (0.90$\mu\textrm{g}$ㆍ1$^{-1}$), and low in July 1999 (0.22$\mu\textrm{g}$ㆍ1$^{-1}$). Annual mean micro-sized Chl $\alpha$ concentration was 0.15$\mu\textrm{g}$ㆍ1$^{-1}$ monthly mean micro-sized Chl $\alpha$ concentration was high in October 1998 (0.81$\mu\textrm{g}$ㆍ1$^{-1}$), and low July 1998, January, February and September 1999 (0.05$\mu\textrm{g}$ㆍ1$^{-1}$). More than 65% of total Chl $\alpha$ was concentrated during spring and summer time between October and March. Microalgal variation appeared to be due to physical factors of seawater in the Antarctic nearshore from 1998 to 1999. The reason why micro-sized Chl $\alpha$ did not increase during austral summer was the bay had been frozen by decrease of water temperature. We think that total microalgal abundance was decreased because the summer microalgal abundance was determined by variation of water temperature during winter season. [Chl $\alpha$ concentration, Microalgal assembalges, Seasonal variation, the Antarctic nearshore].

• Journal of the Korean Vacuum Society
• /
• v.21 no.1
• /
• pp.48-54
• /
• 2012

Carbon coils could be synthesized on nickel catalyst layer-deposited silicon oxide substrate using $C_2H_2$ and $H_2$ as source gases and SF6 as an additive gas under thermal chemical vapor deposition system. The geometries of as-grown carbon materials were investigated with increasing the reaction temperature as the increment of $25^{\circ}C$ from $650^{\circ}C$ up to $800^{\circ}C$. At $650^{\circ}C$, the embryos for carbon coils were formed. With increasing the reaction temperature to $700^{\circ}C$, the coil-type geometries were developed. Further increasing the reaction temperature to $775^{\circ}C$, the development of wave-like nano-sized coils, instead of nano-sized coils, and occasional appearance of micro-sized carbon coils could be observed. Fluorine in $SF_6$ additive may shrink the micro-sized coil diameter via the reduction of Ni catalyst size by fluorine's etching role. Finally, the preparation of the micro-sized carbon coils having the smaller coil diameters, compared with the previously reported ones, could be possible using $SF_6$ additive.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.4
• /
• pp.1-10
• /
• 2014

In papermaking industry, inorganic fillers are widely used for the purpose of improving opacity, brightness, printability, uniformity and dimensional stability. They are also useful for production costs and energy savings. In the past, inorganic fillers in papermaking industry only focused on micro-scale but recently, new trials on nano-powdered technology are applying. Even nano-powdered fillers are rapidly utilized for improving the optical and surface properties in coating and surface sizing, there still have some problems in wet-end process due to poor dispersibility and retention. In this study, nano-particled calcium carbonate was produced by milling the PCC and its applicability between micro sized and nano sized calcium carbonated was compared in wet-end process, and finally the sheet properties were evaluated. Nano-PCC was not retained in sheet structure without applying retention system, but with retention system nano-powdered PCC was absorbed on fiber surface with expanding the fiber networks. The application of PAM-bentonite system has resulted in high ash retention and bulky structure for copier paper, and good optical properties in brightness and opacity. However, it required to solve the weakness of low tensile property due to interruption of hydrogen bonding by nano fillers.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.615-617
• /
• 1997

This paper reports experimental results on the fabrication and analysis of millimeter-sized bending actuators for active catheter by use of the shape memory alloy spring and the flexible beam. The major components of micro actuator are shape memory alloy spring, stainless steel strip and two acryl links. The micro actuator with the diameter of 2.0 mm and the length of 25 mm has been fabricated and characterized for the possible application to the micro active catheters. The measured maximum angle is $60^{\circ}$ and the response time is 5 sec.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.791-798
• /
• 2001

As the form factor of the disk drive is decreased, many mechanical issues that are negligible in larger form factors, should be considered for the design of the miniature drives. This paper deals with basic research on vibration characteristics and design considerations of small disks and actuators. The natural frequencies of micro-sized disks with polycabonate and glass substrates are experimentally measured, being compared to FEM results. In order to investigate the effects of rotating speeds, airflow and disk size on power consumption. we measure power imposed to spindle motor when different optical disks are spins in vacuum chamber. Finally, The vibration characteristics of the micro actuator used in a IBM Microdrive are experimentally studied for the application to the basic design of micro optical disks.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.3
• /
• pp.219-226
• /
• 2013

A distortion correction technique is presented to enhance the 3D scanning performance of a micro-size camera-projector system. Recently, several types of micro-size digital projectors and cameras are available. However, there have been few effort to develop a micro-size 3D scanning system. We develop a micro-sized 3D scanning system which is based on the structured light technique. Three images of phase-shifted sinusoidal patterns are projected, captured, and analyzed by the system to reconstruct 3D shapes of very small objects. To overcome inherent optical imperfection of the micro 3D sensor, we correct the vignetting and blooming effects which cause distortions in the phase image. Error analysis and 3D scanning results on small real objects are presented to show the performance of the developed 3D scanning system.

• 한국전산유체공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.113-115
• /
• 2003

Droplet impinging into a cavity at micro-scale is one of important fluidic issues for microfabrications, e.g. bio-chip applications and inkjet deposition processes in the PLED panel manufacturing. The droplets generally dispensing from an inkjet head, which contains an array of nozzles, have a volume in several picoliters, while each nozzle jets the droplets into cavities with micron-meter size located on substrates. Due to measurement difficulties at micro-scale, the numerical simulation could serve as an efficient and preliminary way to evaluate the micro-sized droplet impinging behavior into a cavity. The micro-fluidic flow is computed by solving the three-dimensional Navier-Stokes equations through a finite volume discretization. The droplet front is predicted by a volume-of-fluid approach, in which the surface tension is modeled as a function of the fluid concentration. This paper discusses the influence of fluid properties, such as surface tension and fluid viscosity, on micro-fluidic characteristics at different jetting speeds in the deposition process via the proposed numerical approach.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.246-250
• /
• 2003

In this study, two new types of micro-grippers in which micro-fingers are actuated by piezoelectric multi-layer benders and stacks are introduced for the manipulation of micrometer-sized objects. First, we constructed a 3-chopstick-mechanism tungsten gripper, which is composed of three chopsticks: two are designed to grip micro-objects, and tile third is used to help grasp and release the objects through overcoming especially electrostatic force among some surface effects including electrostatic, van der Waals forces and surface tension. Second, a 2-chopstick-mechanism silicon micro-gripper that uses an integrated force sensor to control the gripping force was developed. The micro-gripper is composed of a piezoelectric multilayer bender for actuating the gripper fingers, silicon fingertips fabricated by use of silicon-based micromachining, and supplementary supports. The micro-gripper is referred to as a hybrid-type micro-gripper because it is composed of two main components; micro-fingertips fabricated using micromachining technology to integrate a very sensitive force sensor for measuring the gripping force, and piezoelectric gripper finger actuators that are capable of large gripping forces and moving strokes. The gripping force signal was found to have a sensitivity of 667 N/V. To the design of each of components of both of the grippers. a systematic design approach was applied, which made it possible to establish the functional requirements and design parameters of the micro-grippers. The micro-grippers were installed on a manual manipulator to assess its performance in tasks such as moving micro-objects from one position to a desired position. The experiment showed that the micro-grippers function effectively.