• Transactions of Materials Processing
• /
• v.28 no.5
• /
• pp.239-246
• /
• 2019

Various surface texturing techniques have been studied because of the effective applicability of micro or nano scale surface patterns. Particularly, the most promising types of patterns include the hierarchical patterns, which consists of micro/nano structures. Different processes such as MEMS, laser machining, micro cutting and micro grinding have been applied in the production of hierarchical patterns on various material surfaces. This study demonstrates the process of hot imprinting to induce the hierarchical patterns on the Al alloy surfaces. Wire electrical discharge machining (WEDM) process was used to imprint molds with micro scale sinusoidal pattern. In addition, the sinusoidal pattern with rough surface morphology was obtained as a result of the discharge craters. Consequently, the hierarchical patterns consisting of the sinusoidal pattern and the discharge craters were prepared on the imprinting mold surface. Hot imprinting process for the Al plates was conducted on the prepared mold, and the replication performance was analyzed. As a result, it was confirmed that the hierarchical patterns of the mold were effectively duplicated on the surface of Al plate.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.11
• /
• pp.1209-1216
• /
• 2009

Nano-micro hierarchical structures that nanoprotrusions were formed on the network-type microstructures were fabricated using an ultrasonic vibration forming technology. A commercial ultrasonic welding system was used to apply ultrasonic vibration energy. To evaluate the formability of ultrasonic vibration forming, nickel nano-micro hierarchical mold was fabricated and polyethylene (PE) was used as the replication material. The optimal molding time was 3.5 sec for PE nano-micro hierarchical structures. The molding process was conducted at atmospheric pressure.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.426-428
• /
• 2007

A simple method is presented for fabricating micro/nanoscale combined hierarchical structures using a two-step UV-assisted capillary molding technique. This lithographic method consists of two steps: (i) fabrication of partially cured polymer microstructures using a PDMS mold and (ii) subsequent nanofabrication using a high-resolution polyurethane acrylate (PUA) mold on top of the pre-formed microstructures. Using this technique, various micro/nano hierarchical structures were fabricated with minimum resolution down to 70 nm over a large area with very good reproducibility.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.24-24
• /
• 2018

One of the challenges in tissue engineering is the design of optimal biomedical scaffolds, which can be governed by topographical surface characteristics, such as size, shape, and direction. Of these properties, we focus on the effects of nano - to micro - sized hierarchical surface. To fabricate the hierarchical surface structure on poly(${\varepsilon}$-caprolactone) (PCL) film, we employed a nano/micro-casting technique (NCT) and modified plasma process. The micro size topography of PCL film was controlled by sizes of the micro structures on lotus leaf. Also, the nano-size topography and hydrophilicity of PCL film were controlled by modified plasma process. After the plasma treatment, the hydrophobic property of the PCL film was significantly changed into hydrophilic property, and the nano-sized structure was well developed, as increasing the plasma exposure time and applied power. The surface properties of the modified PCL film were investigated in terms of initial cell morphology, attachment, and proliferation using osteoblast-like-cells (MG63). In particular, initial cell attachment, proliferation and osteogenic differentiation in the hierarchical structure were enhanced dramatically compared to those of the smooth surface.

• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.5
• /
• pp.467-473
• /
• 2019

In this study, approached to improve durability of the multi-functional nano-pattern fabricated on the curved lens surface using nanoimprint lithography (NIL) was proposed, and the effects of the proposed methods on functionality after wear test were examined. To improve the mechanical property of ultraviolet(UV)-curable resin, UV-NIL was conducted at the elevated temperature around $60^{\circ}C$. In addition, micro/nano hierarchical structures was fabricated on the lens surface with a durable film mold. Analysis on the worn surfaces of nano-hole pattern and hierarchical structures and measurements on the static water contact angle and critical water volume for roll-off indicated that the UV curing process with elevated temperature is effective to maintain wettability by increasing hardness of resin. Also, it was found that the micro-scale pattern is effective to protect nano-pattern from damage during wear test.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.233.1-233.1
• /
• 2005

• Composites Research
• /
• v.20 no.2
• /
• pp.17-20
• /
• 2007

Superhydrophobic polytetrafluoroethylene ($Teflon^{(R)}$, Dupont) sub-micro and nanostructures were fabricated by the dipping method, based on anodization process in oxalic acid. The polymer sticking phenomenon during the replication creates the sub-microstructures on the negative polytetrafluoroethylene nanostructure replica. This process gives a hierarchical structure with nanostructures on sub-microstructures, which looks like the same structures as lotus leaf and enables commercialization. The diameter and the height of the replicated nano pillars were 40 nm and 40 um respectively. The aspect ratio is approximately 1000. The fabricated surface has a semi-permanent superhydrophobicity, the apparent contact angle of the polytetrafluoroethylene sub-micro and nanostructures is about $160^{\circ}$, and the sliding angle is less than $1^{\circ}$.

• Journal of the Microelectronics and Packaging Society
• /
• v.25 no.4
• /
• pp.47-52
• /
• 2018

In this study, the effects of the heat treatment and multi-scale hierarchical structures on the durability of the nano-patterned functional PMMA(Poly(methyl-methacrylate)) film was evaluated. The heat treatments that consisted of high-pressure/high-temperature flat pressing and rapid cooling process were employed to improve mechanical property of the PMMA films. Multi-scale hierarchical structures were fabricated by thermal nanoimprint to protect nano-scale structures from the scratch. Examination on surface structures and functionalities such as wetting angle and transmittance revealed that the preopposed heat treatment and multi-scale hierarchical structures are effective to minimize surface damages.

• Composites Research
• /
• v.31 no.4
• /
• pp.171-176
• /
• 2018

We proposed new and easy fabrication method of micro-nano hierarchical structures for synthetic dry adhesives and conducted feasibility tests of alignment characteristics of nano-materials in the microstructures by capillary effect. Candidates of fabrication conditions were selected based on the degree of cure and viscosity of mixtures of multiwall carbon nanotubes (MWCNTs) and polydimethylsiloxane (PDMS), which were measured with respect to the fabrication conditions. Scanning electron microscopy images of cross sections of MWCNT-PDMS microstructures were analyzed. MWCNT alignment in microstructures was better when fabrication temperature and degree of cure at fabricating start were lower, but areal density of MWCNTs was little affected by fabrication conditions.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.366-366
• /
• 2016

Nanoscale observation of attachment systems of animals has revealed various exquisite multiscale architectures for essential functions such as gecko's locomotion, beetles' wing fixation, octopuses' sucking and crawling. In particular, the hierarchical 3-dimensional hexanonal nano-architectures in the tree frog's adhesion is known to have the capability of the enhancement of adhesion forces on the wet or rough surfaces due to the conformal contacts against rough surfaces and water-drainable micro channels. Here, we report that tree frog-inspired patches using unique artificial 3-dimensional hexagonal structures can be exploited to form reversibly enhanced adhesion against various highly curved and rough surfaces in dry and wet condition. To investigate the adhesion effect of micro-channels, we changed the arrangement of microstructure and spacing gaps between micro-channels. In addition, we introduced the 3-dimensional hexagonal hierarchical architectures to artificial patches to enhance to conformal contacts on the various rough surfaces such as skin and organs. Using the robust adhesion properties, we demonstrated the self-drainable and comfortable skin-attachable devices which can measure EKG (electrokardiogramme) for in-vitro diagnostics. As a result, bio-inspired programmable nano-architectures can be applied in versatile devices such as, medical patches, skin-attachable electronics etc., which would shed light on future smart, directional and reversible adhesion systems.