• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.4
• /
• pp.1619-1629
• /
• 2013

It turned out that there was a direct or an indirect relationship among global warming, urban heat island effects, urban and traffic environments, and public's health. In particular, unusual climate phenomena such as frequent heavy rainfall and scorching heat in a row that had rarely happened before have a negative effect on quality of life for people living in urban areas. This study focuses on the effects of roadway geometric design and traffic conditions on air temperature of roadside in Seoul Metropolitan Areas, controlling of roadway micro-climate environment. Five roadway segments containing different roadway and traffic conditions in terms of traffic median with trees, street trees, traffic volume and average travel speeds were surveyed. According to statistical results(t-test) from three roadway air temperature regression model estimations, air temperature is found to be different from one another in three periods-morning, afternoon and evening. Regarding roadway geometric design, air temperature of urban roads with vegetated median strips is lower about 1.3~2.2 degrees in celcius. Higher traffic volumes per lane and lower average travel speeds will tend to increase roadside air temperature, and efficient traffic operation policies can protect from increasing roadside air temperature in urban areas.

• The Journal of the Korea Contents Association
• /
• v.13 no.1
• /
• pp.30-39
• /
• 2013

In recent years, with the development of devices to collect multimedia data such as small CMOS camera sensor and micro phone, studies on wireless multimedia sensor network technologies and their applications that extend the existing wireless sensor network technologies have been actively done. In such applications, various basic schemes such as the processing, storage, and transmission of multimedia data are required. Especially, a security for real world environments is essential. In this paper, in order to defend the sniffing attack in various hacking techniques, we propose a multipath routing scheme for physically avoiding the data transmission path from the risk factors. Our proposed scheme establishes the DEFCON of the sensor nodes that are geographically close to risk factors and the priorities according to the importance of the data. Our proposed scheme performs risk factor detour multipath routing through a safe path considering the DEFCON and data priority. Our experimental results show that although our proposed scheme takes the transmission delay time by about 5% over the existing scheme, it reduces the eavesdropping rate that can attack and intercept data by the risk factor by about 18%.

• Journal of Korean Society of Steel Construction
• /
• v.15 no.5 s.66
• /
• pp.499-507
• /
• 2003

As the load is increased on the steel-concrete composite structure, its interface begins to show nonlinear behavior due to the reduction of interaction, micro-crack, slip and separation, and it causes slip-softening, Therefore, it is essential to consider the partial-interaction analysis technique. Until now, however, full-interaction or, in some instances, the linear-elastic model, which are insufficient to simulate accurate behavior, are assumed in the analysis of composite structure since the analysis method and nonlinear model for interface are very difficult and complicated. Therefore, the design of composite structure is followed by the experimental method which is inefficient-because a number of tests have to be carried out according to the design environments. In this study, we carried out the nonlinear analysis according to various interface nonlinear models by interaction magnitude, and analyzed more accurate structural behavior and performance by maximum tangential traction and slip-softening at the interface. As a result of this study. we were able to prove that the nonlinear model of interface more exactly represents behavior after yielding, such as ultimate load: that initial tangential stiffness of interface has a significant effect on the yielding load of structural members or part: and that the maximum tangential traction and slip-softening mainly effects structural yielding and ultimate load. Therefore, the structural performance of composite structure is highly dependent on the steel-concrete interface or interaction, which may result in initial tangential stiffness, maximum tangential traction and slip-softening in nonlinear model.

• Journal of Korean Society of Transportation
• /
• v.36 no.2
• /
• pp.67-85
• /
• 2018

Vehicle platooning through wireless communication and automated driving technology has become realized. Platooning is a technique in which several vehicles travel at regular intervals while maintaining a minimum safety distance. Truck platooning is of keen interest because it contributes to preventing truck crashes and reducing vehicle emissions, in addition to the increase in truck flow capacity. However, it should be noted that interactions between vehicle platoons and adjacent manually-driven vehicles (MV) significantly give an impact on the performance of traffic flow. In particular, when vehicles entering from on-ramp attempt to merge into the mainstream of freeway, proper interactions by adjusting platoon size and inter-platoon spacing are required to maximize traffic performance. This study developed a methodology for establishing operational strategies for truck platoonings on freeway on-ramp areas. Average speed and conflict rate were used as measure of effectiveness (MOE) to evaluate operational efficiency and safety. Microscopic traffic simulation experiments using VISSIM were conducted to evaluate the effectiveness of various platooning scenarios. A decision making process for selecting better platoon operations to satisfy operations and safety requirements was proposed. It was revealed that a platoon operating scenario with 50m inter-platoon spacing and the platoon consisting of 6 vehicles outperformed other scenarios. The proposed methodology would effectively support the realization of novel traffic management concepts in the era of automated driving environments.

• Publications of The Korean Astronomical Society
• /
• v.24 no.1
• /
• pp.53-64
• /
• 2009

MIRIS is the main payload of the STSAT-3 (Science and Technology Satellite 3) and the first infrared space telescope for astronomical observation in Korea. MIRIS space observation camera (SOC) covers the observation wavelength from $0.9{\mu}m$ to $2.0{\mu}m$ with a wide field of view $3.67^{\circ}\times3.67^{\circ}$. The PICNIC HgCdTe detector in a cold box is cooled down below 100K by a micro Stirling cooler of which cooling capacity is 220mW at 77K. MIRIS SOC adopts passive cooling technique to chill the telescope below 200 K by pointing to the deep space (3K). The cooling mechanism employs a radiator, a Winston cone baffle, a thermal shield, MLI (Multi Layer Insulation) of 30 layers, and GFRP (Glass Fiber Reinforced Plastic) pipe support in the system. Optomechanical analysis was made in order to estimate and compensate possible stresses from the thermal contraction of mounting parts at cryogenic temperatures. Finite Element Analysis (FEA) of mechanical structure was also conducted to ensure safety and stability in launching environments and in orbit. MIRIS SOC will mainly perform Galactic plane survey with narrow band filters (Pa $\alpha$ and Pa $\alpha$ continuum) and CIB (Cosmic Infrared Background) observation with wide band filters (I and H) driven by a cryogenic stepping motor.

• Journal of Life Science
• /
• v.25 no.6
• /
• pp.686-692
• /
• 2015

Cancer is subject to dynamic interactions between contrary immune reactions that drive both tumor growth and suppression. Forkhead box p3 positive T cells (Foxp3 positive T cells) might support tumor promotion, while CD8 positive T cells might protect the host. The present study examined the distributions of CD8- and Foxp3-positive T cells and CD8 positive T cells/ Foxp3 positive T cells ratio in skin squamous cell carcinoma (SCC) and its precancerous lesions; it also compared this with data for basal cell carcinoma (BCC). Iimmunohistochemical staining for CD8 and Foxp3 was conducted in 20 cases of SCC, Bowen's disease (BD), actinic keratosis (AK) and BCC. The BD and SCC cases exhibited significantly increased numbers of both CD8- and Foxp3-positive T cells in their advancing regions compared with the AK and BCC cases, and the BD cases exhibited significantly lower CD8 positive T cells / Foxp3 positive T cells ratio in these regions than did the AK and BCC cases. There was no significant difference in both T cells and the ratio between BD and SCC. The degree of both T cells infiltration differed between the advancing and central areas in SCC and BCC. Immune micro-environments differ between cutaneous squamous cell tumors and BCC and differ as well among tumor compartments.

• Journal of the Korea Concrete Institute
• /
• v.20 no.4
• /
• pp.415-421
• /
• 2008

Reinforced concrete starts to corrode when the chloride ion concentration which is the sum of included in concrete and penetrated from environments exceeds a certain level of critical chloride concentration. Therefore each country regulates the upper bounds of chloride amount in concrete and the regulations are different for each country due to its circumstances. In this study, the critical threshold chloride content according to unit cement amount is empirically calculated to propose a reasonable regulation method on the chloride amount. As a result, the critical threshold chloride content increases considerably according to cement content and it agrees with the established theories. The present regulations on total chloride amount 0.3 or 0.6 kg chloride ions per $1\;m^3$ of concrete does not reflect the influences of mix design, environmental conditions and etc. So it can be said that it is more reasonable to regulate the critical threshold chloride content by the ratio of chloride amount per unit cement content than by the total chloride content in $1\;m^3$ of concrete.

• Journal of the Institute of Convergence Signal Processing
• /
• v.20 no.1
• /
• pp.16-23
• /
• 2019

Fine particulate matter known as PM 2.5 refers to the atmospheric particulate matter that has a diameter less than 2.5 micrometer identified as dangerous element for human health and its concentration can provide us a clear picture about air dust concentration. Humans stay indoor almost 90% of their life time and also there is no official indoor dust concentration data, so our study is focused on measuring the indoor air quality. Indoor dust data monitoring is very important in hospital environments beside that other places can also be considered for monitoring like classrooms, cements factories, computer server rooms, petrochemical storage etc. In this paper, visible light communication system is proposed by Manchester encoding technique for electromagnetic interference (EMI)-free indoor dust monitoring. Important indoor environment information like dust concentration is transferred by visible light channel in wide range. An average voltage-tracking technique is utilized for robust light detection to eliminate ambient light and low-frequency noise. The incoming light is recognized by a photo diode and are simultaneously processed by a receiver micro-controller. We can monitor indoor air quality in real-time and can take necessary action according to the result.

• Korean Journal of Remote Sensing
• /
• v.24 no.6
• /
• pp.559-569
• /
• 2008

The Geostationary Ocean Color Imager (GOCI) on board the Communication Ocean Meteorological Satellite (COMS), the first geostationary ocean color sensor, requires accurate atmospheric correction since its eight bands are also affected by atmospheric constituents such as gases, molecules and atmospheric aerosols. Unlike gases and molecules in the atmosphere, aerosols can interact with sunlight by complex scattering and absorption properties. For the purpose of qualified ocean remote sensing, understanding of aerosol-radiation interactions is needed. In this study, we show micro-physical and optical properties of aerosols using the Optical Property of Aerosol and Cloud (OPAC) aerosol models. Aerosol optical properties, then, were used to analysis the relationship between theoretical satellite measured radiation from radiative transfer calculations and aerosol optical thickness (AOT) under various environments (aerosol type and loadings). It is found that the choice of aerosol type makes little different in AOT retrieval for AOT<0.2. Otherwise AOT differences between true and retrieved increase as AOT increases. Furthermore, the differences between the AOT and angstrom exponent from standard algorithms and this study, and the comparison with ground based sunphotometer observations are investigated. Over the northeast Asian region, these comparisons suggest that spatially averaged mean AOT retrieved from this study is much better than from standard ocean color algorithm. Finally, these results will be useful for aerosol retrieval or atmospheric correction of COMS/GOCI data processing.

• Journal of vocational education research
• /
• v.30 no.4
• /
• pp.1-22
• /
• 2011

Paradoxically, leadership has not only positive effects but also negative effects. The purpose of this study is to examine supervisors' dysfunctional leadership behaviors, antecedents and results in order to draw HRD implications for protecting organizations and employees from dysfunctional leaders and provide implications for leadership development. A qualitative research method based on semi-organized interviews with 28 employees from S-group was used. The results of this study show that the dysfunctional leadership behaviors were associated with ten behavioral categories: belittling and insulting the subordinates, authoritative and arbitrary behaviors, self-aggrandizement, biased preference for certain personnel, arrogance, micro-managing, inability to change and adapt, discordance between words and actions, over-dependance on supervisor, lack of ethics and values. Dysfunctional leadership behaviors were casually attributed to 'personal traits & experience', 'task characteristics', and 'internal & external environments of the organization'. Finally, the results of supervisor's dysfunctional leadership behaviors on employees and the organizational effects were 'increased turnover rate', 'declining work efficiency', 'collapsing morale', 'retraining innovative thinking', 'passive working culture', 'discouraging organizational vitality', 'discouraging organizational synergy', 'losing loyalty' and 'declining trust on supervisor'.