• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.216-216
• /
• 2009

This paper describes a novel processing technique for the fabrication of polymer-derived SiCN (silicone carbonitride) microstructures for extreme microelectromechanical system (MEMS) applications. A polydimethylsiloxane (PDMS) mold was formed on an SU-8 pattern using a standard UV photolithographic process. Next, the liquid precursor, polysilazane, was injected into the PDMS mold to fabricate free-standing SiCN microstructures. Finally, the solid polymer SiCN microstructure was cross-linked using hot isostatic pressure at $400^{\circ}C$ and 205 bar. The optimal pyrolysis and annealing conditions to form a ceramic microstructure capable of withstanding temperatures over $1400^{\circ}C$ were determined. Using the optimal process conditions, the fabricated SiCN ceramic microstructure possessed excellent characteristics includingshear strength (15.2 N), insulation resistance ($2.163{\times}10^{14}\;{\Omega}$, and BDV (1.2 kV, minimum). Since the fabricated ceramic SiCN microstructure has improved electrical and physical characteristics compared to bulk Si wafers, it may be applied to harsh environments and high-power MEMS applications such as heat exchangers and combustion chambers.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2001.05a
• /
• pp.194-199
• /
• 2001

쾌적한 스포츠웨어는 기능성에 있어서 자연환경의 변화조건과 인체의 운동 및 활동에 맞추어 열절달 및 수분전달 등을 적절히 조절할 수 있어야 한다. 이에 본 연구에서는 일반환경조건 및 강우환경조건하에서의 형상기억 투습방수직물 소재의 스포츠웨어 착용에 따른 인체생리반응 및 쾌적감을 규명하기 위하여 스포츠웨어를 제작하여, 인공기후실에서 환경조건변화에 따른 온열생리학적 특성 및 주관적 감각을 측정, 그 특성을 비교, 고찰하였다. 평균피부온은 강우환경조건에서 온도가 낮게, 변동폭이 많게 나타났다. 변화경향을 운동부하를 기점으로 온도의 상승이 나타났고, 운동 2단계에 가장 높은 온도를 나타냈으며, 이후 감소하였다. 직장온은 일반환경조건에 비해 강우환경조건에서 온도의 미세한 상승을 보였다. 의복내 기후는 두 조건 모두에서 가슴부위보다 등부위의 온·습도의 변동폭이 크게 나타났고, 강우환경조건에서의 의복내 온도를 제외하고는 모두 등부위의 온·습도가 높게 나타났다. 최고 혈압은 운동의 강도에 따라 비례하여 상승하고, 최저 혈압에는 큰 영향없이 나타났으며, 변화경향은 의복내 온도의 경향과 역으로 나타났다. 평균혈압은 일반환경조건에서 6.9mmHg 높게 나타났다. 심박수는 일반환경조건에서 4.4beats/min 높게 나타났다. 강우환경조건의 주관적 감각의 평가에서, 신체에 직접 가해지는 빗물 등으로 인해 불쾌감이 증가하였고, 운동 후에는 일반환경조건과 달리 냉감이 증가하였으며, 습윤감은 최고치에 달하였다.

• Journal of KIISE:Information Networking
• /
• v.35 no.3
• /
• pp.207-214
• /
• 2008

There are lots of studies on application systems using wireless sensor networks. As the application systems are adapted to industrial field, the reliability of these systems becomes new key feature. The lack of reliability is an obstacle to extension of wireless sensor networks. In this paper, we propose the monitoring system framework that can offer the reliability of wireless sensor networks using a micro camera module and wireless sensor network nodes. And also we propose the efficient transfer method for image information over low rate wireless networks. Using these system framework and transfer method, we implement WiSN(Wireless image Sensor Network) based fire monitoring system.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.5 no.2
• /
• pp.15-26
• /
• 1999

The marine structures with sea water cooling system always expose to the oceanic atmosphere. Therefore, the protection of the equipments is very important. To investigate the effectiveness of advanced composite materials for the application in offshore environments, the tensile test, hardness test, undercutting property test, permeance test and the friction and wear test were carried out by using various applicable coating materials. The main results obtained can be summarized as follows; 1. The micro-hardness of the Archcoat 502B showed the highest value. 2. The coefficient of friction of the Rigspray coating at the speed of 2.21m/sec showed the lowest value, and that of the Archcoat 502B coating at 1.08m/sec and 0.18m/sec indicated the lowest values. 3. The wear mass at the speed of 0.18m/sec and 1.08m/sec in dry condition showed the smallest values. 4. The Archcoat 502B coating is fitted to the dynamic instruments in the range of low speed and middle speed. Rigspray coating is fitted to the dynamic instruments in the range of high speed. 5. The wear mass of five kinds of coating materials at the range of low speed was very small, and those of the Archcoat S02B, Archcoat 402B and Rigspray coating at high speed range were quitely smaller than those of the Modified Epoxy and Tar Epoxy.

• Journal of Korea Multimedia Society
• /
• v.23 no.11
• /
• pp.1372-1382
• /
• 2020

This paper proposes a core technology for a micro river monitoring terminal device suitable for flood monitoring in small rivers and valleys. Our proposed device is basically equipped with a 77GHz radar, gyro and accelerometer sensors. To measure the flow velocity and water level, we proposed a signal processing technique that extracts pure water energy components from the observed Doppler velocity and reflection intensity from the radar. And to determine the stability of the river structure equipped with our device, we constantly monitor the displacement of the measured values of the gyro and accelerometer sensors. Experimental result verified that our method detects pure water energy in various river environments and distinguishes between flow velocity and water level well. And we verified that vibration and position change of structures can be determined through a gyro sensor. In future research, we will work to build a secure digital twin river network by lowering the cost of supplying RF-WAV devices. Also we expect our device to contribute to securing a preventive golden time in rivers.

• Journal of the Korean Society of Combustion
• /
• v.13 no.3
• /
• pp.17-23
• /
• 2008

The spray combustion and spray cooling depends on droplet evaporation. So, evaporation model for spray has been requested and lots of investigation has been done and various reliable models have been developed also for last few decades. In the present study, One dimensional quasi-steady spherically symmetric droplet evaporation model for micro-gravity is developed. The gas phase was assumed as steady state and the thermophysical properties are calculated as a function of temperature, pressure and composition and the properties used in the model was validated by NIST web data and overall evaporation history results was compared with experimental results by Nomura and Qasim and gave satisfactory agreements. Through this model, diverse phenomenon was investigated, especially regarding the effects of ambient pressure and temperature. The effects of pressure for the droplet evaporation time were studied. The high pressure increased the droplet surface temperature and made effect on the evaporation time depend on atmospheric temperature. The role of the ambient temperature was investigated and explained. The basic investigation for the evaporation process according to variation of droplet diameter and surface temperature were also investigated and the well-known phenomena, like D-square-law, were reported, too.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.11
• /
• pp.1028-1036
• /
• 2004

Ultrasonic sensors are widely used in mobile robot applications to recognize external environments by virtue that they are cheap, easy to use, and robust under varying lighting conditions. In most cases, a single ultrasonic sensor is used to measure the distance to an object based on time-of-flight (TOF) information, whereas multiple sensors are used to recognize the shape of an object, such as a comer, plane, or edge. However, the conventional sequential driving technique involves a long measurement time. This problem can be resolved by pulse coding of ultrasonic signals, which allows multi-sensors to be emitted simultaneously and adjacent objects to be distinguished. Accordingly, this paper presents a new simultaneous coded driving system for an ultrasonic sensor array for object recognition in autonomous mobile robots. The proposed system is designed and implemented. A micro-controller unit is implemented using a DSP, Polaroid 6500 ranging modules are modified for firing the coded signals, and a 5-channel coded signal generating board is made using a FPGA. To verify the proposed method, experiments were conducted in an environment with overlapping signals, and the flight distances fur each sensor were obtained from the received overlapping signals using correlations and conversion to a bipolar PCM-NRZ signal.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.10
• /
• pp.883-888
• /
• 2002

SiC direct bonding technology is very attractive for both SiCOI(SiC-on-insulator) electric devices and SiC-MEMS(micro electro mechanical system) fields because of its application possibility in harsh environments. This paper presents pre-bonding techniques with variation of HF pre-treatment conditions for SiC wafer direct bonding using PECVD(plasma enhanced chemical vapor deposition) oxide. The PECYD oxide was characterized by XPS(X-ray photoelectron spectrometer) and AFM(atomic force microscopy). The characteristics of the bonded sample were measured under different bonding conditions of HF concentration and an applied pressure. The bonding strength was evaluated by the tensile strength method. The bonded interface was analyzed by using SEM(scanning electron microscope). Components existed in the interlayer were analyzed by using FT-IR(fourier transform infrared spectroscopy). The bonding strength was varied with HF pre-treatment conditions before the pre-bonding in the range of 5.3 kgf/cm$^2$to 15.5 kgf/cm$^2$.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2000.04a
• /
• pp.51-56
• /
• 2000

Demand for new nondestructive evaluations is growing to detect tensile crack growth behavior to predict long term performance of materials and structure in aggressive environments, especially when they are in non-visible area. Acoustic emission technique is well suited to these problems and has drawn a keen interests because of its dynamic detection ability, extreme sensitivity and location of growing defects. In this study, we analysed acoustic emission signals obtained in tensile test of high strength fire resistance steel for frame structure with time frequency analysis methods. The results obtained are summaries as follows ; In the T and TN specimen consisting of ferrite and pearlite grains, most of acoustic emission events were produced near yield point, mainly due to the dislocation activities during the deformation. However, B specimen under $600^{\circ}C$ - 10min had a two peak which was attribute to the presence of martensite phase. The first peak is before yield point the second is after yield point. The sources of second acoustic emission peak were the debonding of martensite-martensite interface and the micro-cracking of brittle martensite phase. In $600^{\circ}C$-30min to $700^{\circ}C$-60min specimens, many signals were observed from area before yield point and counts were decreased after yield point.

• Journal of the Ergonomics Society of Korea
• /
• v.17 no.1
• /
• pp.91-102
• /
• 1998

History of the Sensibility Ergonomics is explained. Concepts, definition, and research methods on the human sensibility are proposed for systematic applications of human sensibility studies to product and environment developments. Sensibility Ergonomics was born in socio-technological environments where consumers required aesthetic and satisfactory products in addition to useful and usable ones, and manufactures were trying to develop consumer-oriented, user-friendly products. Sensibility Ergonomics is defined as "multi-disciplinary and inter-disciplinary processes for developing products and environment as usable, comfortable and satisfactory with the information on human sensibility." Human sensibility is functionally defined as "feelings generated when perceived sensory and information stimuli are reflected from memory which has been accumulated through personal experiences." Human sensibility is affected by at least three factors: personal, social, and cultural. Consumers evaluate products in three aspects : functional, sensorial, and cultural sensibilities. Human sensibility is personal, dynamic, and ambiguous. It is generated reflectively and intuitively against external stimuli. No Physiological responses are accompanied, and one cannot control his/her sensibility. However, the sensibility affects the decision making or behavior of the person. To understand the human sensibility many inter-disciplinary methods should be used instead of one-variable approach. Micro-scopic studies such as Questionnaire, interview, behavioral analysis, and psychophysiological experiments can be performed. In addition, social and cultural studies are essential to understand an individual's sensibility. Results of sensibility studies can be applied to setup new interactions between human and machine through sensible(or affective) human-machine (computer) interfaces. Human-oriented and user-friendly products can be made with the information on human sensibility.