• 제목/요약/키워드: Micro-dust

검색결과 72건 처리시간 0.024초

실내 준휘발성유기화합물 방출량 측정법에 대한 고찰 (Consideration of Measurement Method for SVOCs Emission Rates)

  • 서장후
    • 설비공학논문집
    • /
    • 제23권5호
    • /
    • pp.375-382
    • /
    • 2011
  • Semi volatile organic compounds (SVOCs) are used as plasticizers in building materials, interior materials, furniture, consumer electronics. etc. In the home, these SVOCs mix together with house dust. There is thus concern over the health effects of SVOCS in the home, there is a risk that they ini1uence childhood asthma and allergies. It is difficult to measure SVOCs emission rates from building materials or household appliances utilizing the usual test chamber methods, because the boiling points of SVOCs are higher and they are apt to adhere to the surface of the test chamber used. In this study, we introduce FLEC chamber method, passive sampler method and micro chamber method, which are used in Germany and Japan in order to measure SVOCs emission rates. Characteristic, merits and demerits of test methods are also considered.

목재의 연소특성(1) (질량감소와 착화지연) (Combustion Characteristics of Wood Materials (1) (Mass Reduction and Ignition Delay))

  • 김춘중
    • 한국연소학회지
    • /
    • 제4권2호
    • /
    • pp.11-22
    • /
    • 1999
  • Combustion characteristics of the wood chips(balsa chips) were experimentally investigated with respect to the thermal recycle system of the urban waste. The urban waste contains plastics, vegetable and wood materials. Wood was chosen as an example of the one of the component of urban dust. A small wood chip was burned in a electric furnace by the micro-electric balance. The mass reduction rate was normalized by the initial mass of test piece and the time of volatile combustion end. When the mass of the wood chips(balsa chips) was larger than 0.5g, the combustion similarity was found on the normalized mass reduction rate.

  • PDF

워터젯 시스템을 이용한 석재표면처리장치 개발 (Development of the stone surface process equipment by Water Jet System)

  • 강지호;장명환
    • 산업경영시스템학회지
    • /
    • 제26권3호
    • /
    • pp.31-38
    • /
    • 2003
  • There is boner process of stone manufacturing to become quality down of stone to consolidated micro crack appearance of stone surface and biotite by fire that is to be route process in stone surface by flame of LPG. And then, it is develop that stone surface process equipment by automation for the work method of boner process can be substitute work method by water jet To development of equipment, There is to be down noise and dust. According to remove calamity growth hazardous substance in the work environment, there is to solve workplace avoidance factor.

팬데믹 상황에서의 패션제품에 대한 소비자의 인식 변화 분석 - 코로나19 확산의 영향 - (Changes in consumer perception of fashion products in a pandemic - Effects of COVID-19 spead -)

  • 최영현;이규혜
    • 복식문화연구
    • /
    • 제28권3호
    • /
    • pp.285-298
    • /
    • 2020
  • This study aimed at examining fashion consumers' awareness during the COVID-19 pandemic. Big data analysis methods, such as text mining, social network analysis, and regression analysis, were applied to user posts about fashion on Korean portal websites and social media during COVID-19. R 3.4.4, UCINET 6, and SPSS 25.0 software were used to analyze the data. The results were as follows. In researching the popular fashion-related topics during COVID-19, the prevention of infection and prophylaxis were significant concerns in the early stage (Jan 1 to Jan 31, 2020), and changed to online channels and online fashion platforms. Then, various topics and fashion keywords appeared with COVID-19-related keywords afterwards. Fashion-related subjects concerned prophylaxis, home life, digital and beauty products, online channels, and fashion consumption. In comparing fashion consumers' awareness during COVID-19 with SARS and MERS, "face masks" was the common keyword for all three illnesses; yet, the prevention of infection was a major consumer concern in fashion-related subjects during COVD-19 only. As COVD-19 cases increased, the search volume for face masks, shoes, and home clothes also increased. Consumer awareness about face masks shifted from blocking yellow dust and micro-dust to the sociocultural significance and short supply. Keywords related to performance turned out to be the major awareness as to shoes, and home clothes were repurposed with an expanded range of use.

목본계 바이오매스오일의 에멀젼 연료화 연구 (A Study of Emulsion Fuel of Cellulosic Biomass Oil)

  • 김문찬
    • 한국응용과학기술학회지
    • /
    • 제33권4호
    • /
    • pp.836-847
    • /
    • 2016
  • 본 연구는 바이오매스를 열분해하여 생성된 수상오일(water soluble oil)을 얻었다. MDO(Marine Diesel Oil)와 수상오일을 유화시켜 생성된 에멀젼 연료의 특성과 배출가스를 연구 하였다. 바이오매스로는 톱밥을 사용하였고 $500^{\circ}C$에서 열분해하여 생성된 물과 탄화수소를 응축시켜서 수상오일을 얻었다. 수상오일을 MDO에 10~20% 까지 혼합 후 유화시켜 에멀젼 연료를 만들었다. 엔진 배출가스 측정은 엔진 dinamometer로 실시하였다. 유화연료는 연소실내에서 미세폭발을 일으켜 연료를 잘게 쪼개어 주어 smoke를 감소시킨다. 그리고 물이 연소실내의 기화열을 빼앗아 연소실 내부의 온도를 낮추어 NOx 생성을 억제하는 효과를 갖는다. ND-13모드의 각 모드별 배출가스온도가 MDO에 비해 유화연료를 사용했을 때 낮게 나온 것으로 뒷받침 될 수 있었다. 유화연료의 함수율이 증가함에 따라 NOx와 smoke의 배출량은 줄어들었으며, 출력도 함수율 증가에 따라 유화연료 자체의 발열량 감소로 인하여 줄어든 것으로 판단된다. ND-13모드에서 MDO 유화연료를 시험한 결과 바이오매스오일 함유량 20%인 유화연료의 NOx 감소량은 약 25%, smoke의 총감소량은 약 60%, 그리고 약 15%의 출력손실을 확인하였다.

405 nm 광원을 이용한 생물입자탐지기의 에어로졸 분석성능 (The performance of Bio-aerosol Detection System (BDS) with 405 nm laser diode)

  • 정영수;정유진;이종민;최기봉
    • 한국입자에어로졸학회지
    • /
    • 제13권1호
    • /
    • pp.25-31
    • /
    • 2017
  • This paper offer the characteristics for the detection and classification of biological and non-biological aerosol particles in the air by using laser-induced-fluorescence (LIF) based Bio-aerosol Detection System (BDS). The BDS is mainly consist of an optical chamber, in-outlet nozzle system, 405 nm diode laser, an avalanche photo detector (APD) for scattering signal and photomultiplier tubes (PMT) for fluorescence signals in two different wavelength range ; F1, 510-600 nm and F2, 435-470 nm. The detection characteristics, especially ratio of fluorescence signal intensity were examined using well-known components : polystylene latex (PSL), fluorescence PSL, $2{\mu}m$ of SiO2 micro sphere, dried yeast, NADH, ovalbumin, fungicide powder and standard dust. The results indicated that the 405 nm diode laser-based LIF instrument can be a useful bio-aerosol detection system for unexpected biological threaten alter in real-time to apply for dual-use technology in military and civilian fields.

Radical Mist Generator Using a Water Plasma Jet and Its Sterilization Effect

  • Huh, Jin Young;Ma, Suk Hwal;Kim, Kangil;Choi, Eun Ha;Hong, Yong Cheol
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
    • /
    • pp.175.1-175.1
    • /
    • 2016
  • In recent, tract infections such as atopic dermatitis, allergic rhinitis and a respiratory disease are increasing, giving rise to the atmospheric pollution, inflow of micro-size dust and side effect of humidifier disinfectant. In this context, the environment-friendly technology is required to eliminate airborne pathogens. We propose solution of the previous problems, making use of Radical Mist Generator (RMG). Existing technologies of air purification using a gas discharge produce harmful substances such as ozone, NOx, etc. However, the RMG uses a pure water as a plasma forming material. The RMG sprays the water mist, which contains reactive radicals to sterilize microorganisms. RMG is comprised of a power supply, plasma electrodes and a nozzle. In order to analyze the electrical characteristic and concentrations of reactive radicals, we employ an oscilloscope and a titration method. To test the sterilization effect of RMG, we used E.coli. We confirmed that E.coli was killed over 90%. Eventually, we expect that RMG can be promising tool for a purified system.

  • PDF

Development of IoT based Real-Time Complex Sensor Board for Managing Air Quality in Buildings

  • Park, Taejoon;Cha, Jaesang
    • International Journal of Internet, Broadcasting and Communication
    • /
    • 제10권4호
    • /
    • pp.75-82
    • /
    • 2018
  • Efforts to reduce damages from micro dust and harmful gases in life have been led by national or local governments, and information on air quality has been provided along with real-time weather forecast through TV and internet. It is not enough to provide information on the individual indoor space consumed. So in this paper, we propose a IoT-based Real-Time Air Quality Sensing Board Corresponding Fine Particle for Air Quality Management in Buildings. Proposed board is easy to install and can be placed in the right place. In the proposed board, the air quality (level of pollution level) in the indoor space (inside the building) is easy and it is possible to recognize the changed indoor air pollution situation and provide countermeasures. According to the advantages of proposed system, it is possible to provide useful information by linking information about the overall indoor space where at least one representative point is located. In this paper, we compare the performance of the proposed board with the existing air quality measurement equipment.

Advances in the Field of Thermal Procedures in Direct Combination with Thin-layer Chromatography

  • Stahl, Egon
    • 생약학회지
    • /
    • 제7권1호
    • /
    • pp.3-13
    • /
    • 1976
  • The hitherto existing gap in the field of chromatographic methods has been filled by the direct coupling of a suitable oven (TAS-oven) with TLC. The sample to be examined is heated either isothermally or linearly within the temperature gradient of $50{\sim}450^{\circ}C$. The volatile and/or thermolytically evolved substances are fractionated on the TLC-layer and subsequently chromatographed under standard conditions. Transport mechanisms from the sample to the TLC-layer, applications of the TAS-procedure and further developments are discussed. Thermofractography, developed from the TAS-procedure, is demonstrated on different groups of natural substances such as alkaloids, amino acids, nucleic acids. nucleosides, nucleotides, triglycerides and other lipids, pyrone glycosides and aglycon. Experimental work and results on the thermolysis of macromolecular natural and synthetic substances, natural polyphenols, tanning agents and leather and the possibilities of differentiating various lignins, carbohydrate and synthetic polymers are reported. Further, it is shown that classical reactions in the microgram range, e.g. zinc dust distillation, sulphur-and selenium dehydrogenation and catalytic dehydrogenation, can be coupled directly with TLC. Also described is a method which allows to investigate the gaseous compounds evolved during thermofractography in the range of up to $450^{\circ}C$. Thermal procedures coupled with TLC open up the following new possibilities for chemical microanalysis: fractionated separation of distillable and sublimable components, fractionated thermolysis and carrying out of thermal reactions in the ultra micro range.

  • PDF

생활 속 미세먼지 영향평가를 위한 소형센서의 신뢰성 및 활용성 평가 (Evaluation of the Usability of Micro-Sensors for the Portable Fine Particle Measurement)

  • 김진수;장유정;김진석;박민우;부찬종;이윤구;김윤하;우정헌
    • 환경영향평가
    • /
    • 제27권4호
    • /
    • pp.378-393
    • /
    • 2018
  • 국내의 미세먼지 문제가 심각해짐에 따라 개인이 활동하는 주변공간의 미세먼지 농도를 알고자 하는 욕구 또한 증가하여 직접 미세먼지의 실시간 농도를 측정할 수 있는 휴대용 미세먼지측정센서에 대한 수요가 증가하고 있다. 그러나 시중에 판매되는 미세먼지 간이측정기는 정해진 인증기준 없이 제작 판매되고 있다. 본 연구에서는 최근 판매가 급증하고 있는 휴대용 미세먼지 측정센서의 농도값을 어느 정도 신뢰할 수 있는지와 이러한 센서들이 어떠한 경우에 활용될 수 있는 지에 대해 일반적인 시민의 입장에서 고찰할 필요가 있다고 판단하였다. 이를 위해, 1) 기기 간 상호비교 및 보다 정확한 장비와의 비교를 수행하고, 2) 휴대용 기기를 활용하여 미세먼지의 영향을 저감할 수 있는 방안들에 대한 검증실험을 수행해 보았다. 그 결과 휴대용센서들의 농도 절대값을 그대로 신뢰하기엔 문제가 있었지만, 그 재현성과 선형성은 실생활에서 활용되기에 유용하다고 판단되었다. 또한 휴대용 미세먼지 측정센서를 사용함으로써 사용자들은 자기 주변의 변화하는 미세먼지 농도에 대해 빠르게 인지하고 대처 할 수 있을 것으로 판단되어, 미세먼지 오염의 피해를 줄이는 데 활용할 수 있을 것이라 기대된다.