• Journal of Electrical Engineering and Technology
• /
• 제2권2호
• /
• pp.263-266
• /
• 2007

We report a nickel optical MEMS switch, being able to rotate through a large angle and to accommodate multiple channels. The proposed optical switch consists of a thin nickel mirror and two torsion springs supporting the mirror. The torsion springs are designed using a finite element method (FEM) such that plastic deformation of the thin nickel is avoided during the large torsion actuation. For switching speed improvement, transient vibration of the released mirror is suppressed by optimizing the mirror design and a fast switching response of $200\;{\mu}s\;(pull-down)/300\;{\mu}s\;(pull-up)$ is demonstrated.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2006년도 추계학술대회 논문집
• /
• pp.113-116
• /
• 2006

AC-electroosmosis is one of the electrokinetic forces leading to phenomena peculiar in the microfluidics. This paper shows particle deformation in the microchannel with rectangular electrodes on the bottom wall for the AC-electroosmotic flows. We make a PDMS microchannnel with ITO electrodes To measure velocity distributions of the particles we used a three-dimensional particle tracking velocimetry (micro-PTV) technique this method is Particle tracking by interpolation the diffraction pattern ring diameter variations with the defocusing distances of base particle locations. we induce a function of frequency at the electrode. We find the velocity of particles is the most at the edge of the electrodes and Particles move to side wall or center of the channel for the bottom and middle.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.488-491
• /
• 2005

Abrasive Jet Micromachining (AJM) is a process that uses high pressure air with micron-sized particles to erode a substrate. It has been considered as the most economic and appropriate technique to pattern glass surfaces for the flat panel applications. To accelerate the industrialization of AJM, it is necessary to understand the erosion mechanisms thoroughly. Thus, this paper introduces a new method to model the erosion mechanism in AJM. The model is developed by using the concept of the accumulation of the microdeformation caused by each particle. And this paper proposes the model added the effects of second impact. The developed model is used to simulate the erosion profile, and is compared with the model considered only first impact. It can be concluded that the proposed model predicts the erosion profile more accurately.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.727-730
• /
• 2005

Cellulose based Electro-Active Papers (EAPap) is very promising material due to its merits in terms of large bending deformation, low actuation voltage, ultra-lightweight, and biodegradability. These advantages make it possible to utilize applications, such as artificial muscles and achieving flapping wings, micro-insect robots and smart wall papers. This paper investigates the in-plane strains of EAPap under electric fields, which are useful for a contractile actuator application The preparation of EAPap samples and the in-plane strain measurement system are explained, and the test results are shown in terms of electric field, frequency and the oriental ions of the samples. The power consumption and the strain energy of EAPap samples are discussed. Although there are still unknown facts in EAPap material, this in-plane strain may be useful for artificial muscle applications.

• Structural Engineering and Mechanics
• /
• 제69권2호
• /
• pp.145-153
• /
• 2019

Modified couple stress formulation and first order shear deformation theory are used for magneto-electro-elastic bending analysis of three-layered curved size-dependent beam subjected to mechanical, magnetic and electrical loads. The governing equations are derived using a displacement field including radial and transverse displacements of middle surface and a rotation component. Size dependency is accounted based on modified couple stress theory by employing a small scale parameter. The numerical results are presented to study the influence of small scale parameter, initial electric and magnetic potentials and opening angle on the magneto-electro-elastic bending results of curved micro beam.

• Structural Engineering and Mechanics
• /
• 제81권4호
• /
• pp.481-492
• /
• 2022

Cycloidal ball planetary transmission (CBPT) has many applications as precision reducer, such as precision machinery and automation drive systems etc. The traditional analytical model of CBPT cannot accurately describe the change of the normal force of meshing points, and thus cannot describe the precise transmission process of meshing pairs. In the paper, a method for deriving the normal force equation is put forward by using the non-linear relationship between force and deformation in elastic mechanics. The two-point contact analytical models of all the meshing pairs are established to obtain the micro-displacement analytical model of CBPT under axial pre-tightening. Then, the non-real-time two-point contact analytical models of all the meshing pairs are further constructed to obtain the normal force expression to determine the critical compression coefficients. Experimental investigations are performed to verify the analytical model using the critical compression coefficients.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2002년도 춘계학술발표회 초록집
• /
• pp.38-38
• /
• 2002

Kinetic indentation technique was studied and a method to evaluate wear and fatigue behaviors of irradiated small specimen was suggested. The method is based on both the proportion of elastic and plastic deformation and values obtained by micro-hardness test. The parameters obtained from the diagram of load-indentation depth-time are required to evaluates wear and fatigue properties. Considering the irradiated test specimen, it is one of possible and useful methods to estimate the irradiated wear and fatigue behaviors of the small size specimen. This article briefly describes the status of irradiated material study in domestic research reactor.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.177-178
• /
• 2006

The results of monotonic and cyclic uniaxial compression tests, in which the deviatoric component of the stress is predominant, carried out on green and recrystallized iron compacts with different levels of density are presented and discussed in order to analyse the macro and micro-mechanisms governing the mechanical behaviour of non-sintered PM materials. The plastic deformation of the particles, especially at the contact areas between neighbouring grains, produces an internal friction responsible for the main features observed in the behaviour of green metallic compacts. These results show important discrepancies with the plasticity models, Cam-Clay and Drucker-Prager Cap.

• 한국지반공학회논문집
• /
• 제38권11호
• /
• pp.43-54
• /
• 2022

철도 시설물에서는 침하 및 틀림에 의해 사고가 발생할 수 있어 변형을 적정수준으로 유지하는 것이 중요하다. 변형을 모니터링하기 위해서는 과도한 인력과 시간이 필요하기 때문에 이를 개선하기 위해 위성원격탐사 기술 중 하나인 InSAR 기술을 활용하고자 한다. 장기적인 시계열 분석을 위해서는 25장 이상의 고해상도 위성정보로 PS-InSAR 기법을 활용 할 수 있으나, 신속하고 단기적인 방법으로 2장 이상의 위성정보로 D-InSAR 기법으로 미세 변형을 관측할 수 있다. 본 연구에서는 TerraSAR-X 영상을 이용하여 D-InSAR 기법을 적용하여 오송 철도종합시험선로의 지반 침하량 및 구조물 변형량을 구하였다. 구조물과 사면에 반사강도를 높일 수 있는 코너리플렉터를 인공적으로 설치하여 변위 값을 임의로 수 mm 조정하여 이를 검증 할 수 있도록 하였다. D-InSAR 분석 결과로부터 적절한 코너리플렉터 배치도를 산출하였고, 궤도, 사면, 구조물 구역의 변위량을 측정하였다. 더불어 임의로 조정한 코너리플렉터의 변위값을 D-InSAR 분석으로 산출하였다. 본 연구 결과로부터 D-InSAR 결과를 철도시설물과 같은 광범위한 인프라 시설에 모니터링을 위한 기법으로 활용 가능함을 확인하였다.

• 대한조선학회논문집
• /
• 제32권1호
• /
• pp.118-131
• /
• 1995

수중폭발을 받게 되는 해군 함정이나 충격하중을 받게 되는 초고속선의 구조에 대한 내충격 파손해석을 거시해석(global or macro analysis)과 미시해석(fine or micro analysis)의 두 단계로 나누어 수행하였다. 거시해석은 이중근사기법(DAA : Doubly Asymptotic Approximation)을 이용하였다. 심한 충격하중을 받는 구조는 주로 세 가지 파괴모드를 나타내는데 이는 충격후기에 주로 나타나는 동소성좌굴(Dynamic plastic buckling)에 기인하는 소성대변형과 충격초기에 주로 나타나는 인장 파괴(Tensile tearing failure)와 횡전단파괴(Transverse shear failure)가 있다. 본 논문의 미시해석에서는 잠수구조의 종보강재에 충격압력이 가해진 경우에 대하여 응력파(stress wave)의 파급과 이 응력파와 균열과의 상호작용에 의한 동적응력강도계수 $K_I(t)$의 계산함으로써 인장 파괴모드(Tensile tearing failure mode)해석을 수행하였다. 특히, 동적응력강도계수 $K_I(t)$의 계산에 있어서 실험적 방법으로 널리 사용되는 shadow optical method of caustic로부터 개발된 numerical caustic method를 사용하였다. 본 논문의 충격파손해석 수치 예로서 해석모델을 완전잠수주상체로 잡고 거시해석을 수행한 후 이로부터 구한 충격압력을 입력자료로 하여 종보강재에 대하여 미시해석을 수행하였다.