• 한국항행학회논문지
• /
• 제16권5호
• /
• pp.839-845
• /
• 2012

본 논문에서는 임베디드 웹 서버(Embedded Web Server)를 이용하여 원격에서 다양한 입출력 장치들의 상태를 계측하거나 이들을 제어하는 시스템을 설계하고 개발한다. 설계된 원격 제어 및 계측시스템은 Cortex-M3 ARM 마이크로컨트롤러를 사용하여 구현되었으며, 제어 및 계측 시스템 사용자를 위한 사용자 응용 프로그램, 그리고 디지틀 입출력 장치, AD/DAC, LCD 및 온습도 센서 등의 구동장치 프로그램 및 이벤트 처리를 위한 웹서버 프로그램을 구현하였다. 각각의 프로그램은 Eclipse 개발환경을 구축하여 Codesourcery C 언어, Java script, 그리고 HTML 언어를 사용하여 작성되었다. 본 논문에서 구현된 제어 및 계측 시스템의 실험결과는 실제로 실시간 실험을 통해, 설계된 바와 같이 사용자가 원하는 동작을 정확하게 수행하는 것을 확인하였다.

• 한국지능시스템학회논문지
• /
• 제26권5호
• /
• pp.351-360
• /
• 2016

Rapid population growth with high living standards and high electronics use for personal comfort has raised the electricity demand exponentially. To fulfill this elevated demand, conventional energy sources are shifting towards low production cost and long term usable alternative energy sources. Hybrid renewable energy systems (HRES) are becoming popular as stand-alone power systems for providing electricity in remote areas due to advancement in renewable energy technologies and subsequent rise in prices of petroleum products. Wind and solar power are considered feasible replacement to fossil fuels as the prediction of the fuel shortage in the near future, forced all operators involved in energy production to explore this new and clean source of power. Presented paper proposes fuzzy logic based Energy Management System (EMS) for Wind Turbine (WT), Photo Voltaic (PV) and Diesel Generator (DG) hybrid micro-grid configuration. Battery backup system is introduced for worst environmental conditions or high load demands. Dump load along with dump load controller is implemented for over voltage and over speed protection. Fuzzy logic based supervisory control system performs the power flow control between different scenarios such as battery charging, battery backup, dump load activation and DG backup in most intellectual way.

• 전력전자학회논문지
• /
• 제9권2호
• /
• pp.178-186
• /
• 2004

본 연구에서는 3상 RCD(Random Pulse Centered Displacement) PWM기법에 비하여 구현이 용이하고 스위칭 주파수의 정수배 스펙트럼의 광대역화와 선형화의 효과가 우수한, 2상 RCD-PWM을 제안하였으며, 그 파워 스펙트럼을 비교하고 있다 종전의 3상 RCD-PWM과 제안된 2상 RCD-PWM을 구현하기 위하여, 16비트 고성능 마이크로 컨트롤러 SAB-Cl67이 사용되었다 SAB-C167에 의하여 각 변조 구간에서의 듀티비를 구한 후, 선형 랜덤 발생기를 이용하여 균일한 확률 분포로 각 상의 펄스의 위치를 재배치하였다. 제안된 2상 RCD-PWM에 의한 모터전압과 전류 그리고 직류링크 전류의 파워 스펙트럼 및 모터의 가청 스위칭 소음 효과를 종전의 3상 RCD-PWM과 비교 검토하였다

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.228-232
• /
• 2002

In this paper, In order to solve the problem is proposed using a new type of electronic ballast that the traditional magnetic ballasts operated at 50-60Hz have been suffered from noticeable flicker, high loss, large crest factor and heavy weight which is composed of rectifier, active power corrector, series resonant half bridge inverter, micro-controller and piezoelectric transformer for driving for driving T5 fluorescent lamp were manufactured. The proposed electronic ballast operated at high frequency (about 75kHz) shows a input power factor of more than 0.995, total harmonic distortion of less than $12\%$ and lamp current crest factor of less than 1.5, respectively. Output power and efficiency showed 28w and $85\%$, respectively. Accordingly, it is considered that the ballast using piezoelectric transformer can replace the typical electronic ballast.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 추계학술대회 논문집
• /
• pp.132-136
• /
• 2003

Generally, PM BLDC drive system is necessary that the three Hall-ICs evenly be distributed around the stator circumference and encoder be installed in case of the 3 phase motor. So, the Hall-ICs are set up in this motor to detect the main flux from the rotor, and the output signal from Hall-ICs is used to drive a power transistor to control the winding current. However, instead of using three Hall-ICs and encoder, we used only two Hall-ICs for the permanent magnet rotor position and for the speed feedback signals, and also for a micro controller of 16-bit type (80C196KC) with the 3 phase PM BLDC whose six stator and two rotor designed. Two Hall-IC Hc and $H_B$ are placed on the endplate at 120 degree intervals, and with these elements, we estimated information of the others phase in sequence through a rotating rotor.

• 전력전자학회논문지
• /
• 제9권2호
• /
• pp.187-193
• /
• 2004

PDA, 스마트폰, USP 및 전기자동차와 같은 전기적 장치의 전력공급을 위하여 배터리가 직렬로 연결된 다중 셀을 만들어 일반적으로 사용한다. 이 경우 개별 셀 전압의 편차가 발생되면 배터리의 수명과 용량은 낮아지게 된다. 셀에서 전압의 안정화상태를 유지하기 위한 셀 전압을 안정화시키는 효율적인 방범은 없어서는 안 될 중요한 사항이다. 본 논문에서는 휴대형 가전기기에 적용하기 위해 마이크로컨트롤러를 사용한 다중 셀용 밸런싱 회로의 설계에 대하여 제안한다. 밸런싱 시스템은 충전되는 주기 동안 밸런싱 동작을 이행하며 마이크로컨트롤러로서 제어된다. 제안된 방법은 충전기와 레코드를 사용하여 실험을 통해 증명하였다. 실험결과에서 개별 배터리의 용량, 수령, 성능이 향상됨을 보여준다.

• 전기학회논문지
• /
• 제57권9호
• /
• pp.1555-1562
• /
• 2008

This paper presents a cooling system using thermoelectron for improving the output of BIPV module. The temperature characteristic in regard to improving the output of BIPV system has rarely been studied up to now but some researchers only presented the method using a ventilator. The cooling system efficiency of BIPV module applied to a ventilator mainly depends on the weather such as wind, insolation etc. Because the cooling system of BIPV module using a ventilator is so sensitive, that is being set off by wind speed at all time but is unable to operate in the NOCT(Nominal Operating Cell Temperature) which is able to make the maximum output. The paper presents the cooling system using thermoelectron so as to solve such problems. The temperature control of thermoelectron can be controlled independently in the outside environment because that is performed by micro-controller. The temperature control of thermoelectron, also, can be operated around NOCT through algorism of the temperature control. Therefore, outputs of the whole system increase and the efficiency rises. The paper demonstrates the validity of proposed method by comparing the data obtained through a experiment of the cooling method of BIPV using a ventilator and proposed thermoelectron.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.106-111
• /
• 2002

In this paper, a new three phase RPWM(Random PWM)with fixed switching frequency is proposed. In the proposed RPWM, each of three phase pulses is located randomly in each switching interval. Based on the space vector modulation technique, the duty ratio of the pulses is calculated. Along with the the randomization of the PWM pulses, we can obtain the effects of spread spectra of voltage, current as in the case of randomly changed switching frequency. To verify the validity of the proposed RPWM, the experimental study was tried. Along with the randomization of PWM pulses, the space vector modulation is also executed in the C167 micro-controller. The experimental results show that the voltage and current harmonics are spread to a wide band area and that the audible acoustic noise is reduced by the proposed RPWM method.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1998년도 추계학술대회
• /
• pp.149-150
• /
• 1998

We have developed electrically driven portable ventilator and evaluated through in-vitro and in-vivo test. Ventilator is consists of DC servo motor(Kollmorgen), piston and ball screw, sensing system, power system with backup battery and micro controller. For the precise and stable volume control, the dynamic brake and the PI speed control loop is employed. The main functions are as followers; control, control+sigh, control/assist, control/assist+sigh and SIMV. The animal experiment showed stable performance when it is operated in control mode.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.536-539
• /
• 2002

In this paper, we developed the automatic optical fiber aligner by image processing and automatic loading system. Optical fiber is indispensable for optical communication systems that transmit large volumes of data at high speed, but super-precision technology in sub-micron units is required for optical axis adjustment, we have developed 6-axis micro stage system for I/O optical fiber arrays, the initial automatic aligning system/software for a input optical array by the image processing technique, fast I/O-synchronous aligning strategy, the automatic loading/unloading system and the automatic UV bonding mechanism. In order to adjust the alignment it used on PC based motion controller, a $10\mu\textrm{mm}$ repeat-detailed drawing of automatic loading system is developed by a primary line up for high detailed drawing. Also, at this researches used the image processing system and algorithm instead of the existing a primary hand-line up. and fiber input array and waveguide chip formed in line by automatic. Therefore, the developed and manufactured optical aligning system in this research fulfills the great role of support industry for major electronics manufacturers, telecommunications companies, universities, government agencies and other research institutions.