• 한국응용과학기술학회지
• /
• 제27권3호
• /
• pp.240-248
• /
• 2010

The blending effects of surfactants on the polystyrene emulsion polymerization were studied. The blending of Triton X-100 and SDS affects to the interfacial properties of the styrene monomer and water phases, and finally, the properties of the polystyrene latex particles. As the blending ratio of SDS/Triton X-100 increases, the interfacial tension and CMC of the blended surfactants were decreased and results in a reducing the size of the latex particles. It was found that the interfacial tension was reduced when the surfactant were blended. By increasing the SDS content, the interfacial tension was reduced, and, at a certain condition, the interfacial tension was reached to an extremely low value to form micro-emulsion and the nano-sized latex particles (80~110 nm).

• 열처리공학회지
• /
• 제36권5호
• /
• pp.261-269
• /
• 2023

This study aims to investigate the effects of tungsten additions on the microstructure, corrosion characteristics, and hardness of super duplex stainless steel heat-treated at two different annealing temperatures. Under the annealing temperature of 1100℃, the microstructure of the stainless steels consisted mainly of ferrite, while under the annealing temperature of 1000℃, significant amounts of austenite and secondary phases were also observed. In terms of corrosion characteristics in 3.5 wt%NaCl solution, there was not a significant difference due to W addition at the 1100℃ conditions. However, at the 1000℃, a tendency of decreased corrosion resistance was observed with increasing the tungsten content. On the other hand, the micro-hardness of the stainless steel heat-treated 1000℃ showed an increasing trend with tungsten addition. This increase can be mainly attributed to the higher fraction of secondary phases, primarily sigma, known for their high hardness.

• Elastomers and Composites
• /
• 제58권1호
• /
• pp.17-25
• /
• 2023

Abrasion tests of model tire tread compounds (NR and NR/BR blend compounds) were performed at different slip angles (1° and 7°) using a laboratory abrasion tester. The abrasion behavior was investigated by analyzing the worn surface and wear particles. The abrasion spacing formed on the specimen worn at the large slip angle of 7° was significantly narrower than that at the small slip angle of 1°, while the abrasion depth for the specimen worn at 7° was lower than that at 1°. The abrasion spacing and depth tended to be narrower and lower, respectively, as the BR content increased. The abrasion patterns were clearly visible on the outside of the specimen for the slip angle of 1° but not for 7°. The wear particles had a rough surface and there were numerous micro-bumps. It was found that the crosslink density affected the abrasion patterns and morphologies of the wear particles.

• Nuclear Engineering and Technology
• /
• 제56권2호
• /
• pp.472-476
• /
• 2024

It is important that radioactive and nuclear wastes are immobilized in a glass composition with lower melting temperatures due to their economy. In this study, the elastic and mechanical properties of sodium borate-based vitrified radioactive waste were measured using ultrasonic techniques. Many ultrasonic parameters, such as elastic moduli, Poisson's ratio, and microhardness, were calculated by measuring the ultrasonic velocities of the glasses. The ultrasonic velocity data, the density, the calculated elastic moduli, micro-hardness, softening temperature, and Debye temperature depending on the glass composition were evaluated, and the relation with the structure was clarified. It was observed that the elastic modulus and Poisson ratio increased as the Cs₂O content increased in glasses containing Cs waste. This result shows that the rigidity of the network structure of these glasses increases in contrast to the glass containing Sr.

• Applied Microscopy
• /
• 제52권
• /
• pp.10.1-10.15
• /
• 2022

The effect of carbon doping contents on the microstructure, hardness, and corrosion properties of heat-treated AISI steel grades of plain carbon steel was investigated in this study. Various microstructures including coarse ferrite-pearlite, fine ferrite-pearlite, martensite, and bainite were developed by different heat treatments i.e. annealing, normalizing, quenching, and austempering, respectively. The developed microstructures, micro-hardness, and corrosion properties were investigated by a light optical microscope, scanning electron microscope, electromechanical (Vickers Hardness tester), and electrochemical (Gamry Potentiostat) equipment, respectively. The highest corrosion rates were observed in bainitic microstructures (2.68-12.12 mpy), whereas the lowest were found in the fine ferritic-pearlitic microstructures (1.57-6.36 mpy). A direct correlation has been observed between carbon concentration and corrosion rate, i.e. carbon content resulted in an increase in corrosion rate (2.37 mpy for AISI 1020 to 9.67 mpy for AISI 1050 in annealed condition).

• 한국구조물진단유지관리공학회 논문집
• /
• 제18권6호
• /
• pp.90-96
• /
• 2014

콘크리트의 전기저항은 철근부식 개시 이전인 잠복기와 철근부식되는 진전기 두과정과 유관된다. 염소이온에 노출된 콘크리트 구조물의 전기저항은 초기 부식율의 위험도를 표현할 수 있는데, 낮은 전기저항은 빠른 염소이온 침투와 높은 부식속도를 의미하기 때문이다. 콘크리트의 전기저항은 인가된 전압과 전류간의 비율인 전기저항으로 표현된다. 이전의 연구에 의하면 콘크리트의 전기저항은 콘크리트내 수분량, 미세구조 및 탄산화 등에 크게 의존하였다. 습윤량과 전기저항의 관계를 다룬 연구가 적지만 존재하는 반면, 염소이온이 전기저항에 미치는 연구를 행한 연구는 매우 드물다. 본 연구의 목적은 염소이온이 콘크리트의 전기저항에 미치는 영향을 고찰하는 것이다. 실험결과에 의하면 염소이온량은 전기저항을 떨어뜨리는 것으로 나타났으며 이는 선형의 관계가 성립되었다. 초기 양생 50일 이전까지 전기저항의 감소추세는 뚜렷하였으며, 이후로는 염소이온량과 상관없이 일정하였다. 결과적으로 본 연구는 염소이온량을 함유한 콘크리트의 전기저항을 표현하는데 결정적인 방법을 제안하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.1077-1080
• /
• 2008

표면염소이온량, 투수계수, 염소이온 확산계수, 임계 염소이온량과 같은 재료 매개변수는 콘크리트의 내구성능을 이해하는데 매우 중요한 재료 매개변수이다. 지난 수십 년간, 해양성 콘크리트 구조물의 내구성 설계에 대한 많은 연구가 이루어졌으나 그 결과는 서로 상이하다. 콘크리트의 통합적인 내구성 설계 시스템을 개발하기 위해서 염소이온의 침투에 영향을 미치는 재료매개변수를 정립하는 것은 반드시 필요한 연구이다. 본 고의 목적은 콘크리트의 재료 매개변수를 시간단계별로 추정할 수 있는 기초적 접근방법을 정리하는 것이다. 미세구조 모델 및 시멘트의 경화특성을 기초로 표면 염소이온량 $[Cl]_s$, 투수계수 K, 염소이온 확산계수 $D_c$, 임계 염소이온량 $[Cl]_{cr}$ 을 산정할 수 있는 해석적 기법이 소개되었다. 이는 시멘트 경화체의 수화단계별 특성을 고려하여 시간의 함수로 표현하였다. 본 고에서 소개한 재료 매개변수의 정립은 시간경과에 따른 염소이온 침투를 시뮬레이션하기 위한 필수적인 선행연구로서, 향후에는 침투 특성을 묘사할 수 있는 지배방정식 등과 같은 다양한 해석적 기법들이 개발될 예정이다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제18권1호
• /
• pp.48-53
• /
• 2005

Finger millet straw and rice straw are the major source of dry roughage in southern India. They distinctly vary in their morphological and nutritional characters. Hence an effort was made to study the nutrient utilization, milk yield and composition in crossbred dairy cows fed either finger millet (group 1) or rice straw (group 2) as a source of dry roughage. The cows in both the groups were fed as per requirement with concentrate, green fodder and straw in the ratio of 30:45:25 parts (DM). At the end of 50 days of preliminary feeding a digestibility trial was conducted for 7 days and pooled samples of feed, fodder, feces, urine and milk were analysed for macro and micro nutrient content. Finger millet straw contained more CP, Ca, P, Mg, Cu, Zn and Co than rice straw and rice straw contained higher ADF, ash and silica. The intake of DM, CP, EE, NDF, ADF and most micronutrients (Ca, P, Mg, Cu, Zn, Fe, Mn and Co) was significantly higher in cows fed finger millet straw. The digestibility of DM, CP, NDF and ADF was significantly higher in cows fed finger millet straw and the gut absorption of Ca, Cu, Mn and Co was significantly higher in cows fed finger millet straw. The dietary requirement of all micronutrients in both the group of cows could be met irrespective of the type of roughage fed except that of Ca, which was low (0.61 and 0.40%) in rice straw fed cows. The average daily milk yield (L/cow) was also higher (7.0 L) in cows fed finger millet straw as compared to cows fed rice straw (6.3 L). The average milk composition also did not differ except that of milk fat which was significantly (4.7 and 4.5%) low in cows fed rice straw. The overall results of this study have indicated that finger millet straw is a better source of dry fodder than rice straw and while feeding rice straw as the sole roughage to dairy cows there is need to supplement additional calcium as this could be one of the limiting nutrients for milk production.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2017년도 춘계공동학술대회
• /
• pp.157-157
• /
• 2017

To minimize the damage by wild birds and acquire the benefits such as protection against weeds and maintenance of water content in soil, the mulching black color vinyl after seeding should be carried out. Non-contact and non-destructive methods that can continuously determine the locations are necessary. In this study, a crop position detection method was studied that uses infrared thermal image sensor to determine the cotyledon position under vinyl mulch. The moving system for acquiring image arrays has been developed for continuously detecting crop locations under plastic mulching on the field. A sliding mechanical device was developed to move the sensor, which were arranged in the form of a linear array, perpendicular to the array using a micro-controller integrated with a stepping motor. The experiments were conducted while moving 4.00 cm/s speed of the IR sensor by the rotational speed of the stepping motor based on a digital pulse width modulation signal from the micro-controller. The acquired images were calibrated with the spatial image correlation. The collected data were processed using moving averaging on interpolation to determine the frame where the variance was the smallest in resolution units of 1.02 cm. Non-linear integral interpolation was one of method for analyzing the frequency using the normalization image and then arbitrarily increasing the limited data value of $16{\times}4pixels$ in one frame. It was a method to relatively reduce the size of overlapping pixels by arbitrarily increasing the limited data value. The splitted frames into 0.1 units instead of 1 pixel can propose more than 10 times more accurate and original method than the existing correction method. The non-integral calibration method was conducted by applying the subdivision method to the pixels to find the optimal correction resolution based on the first reversed frequency. In order to find a correct resolution, the expected location of the first crop was indicated on near pixel 4 in the inversion frequency. For the most optimized resolution, the pixel was divided by 0.4 pixel instead of one pixel to find out where the lowest frequency exists.

• 한국IT서비스학회지
• /
• 제10권3호
• /
• pp.61-76
• /
• 2011

The purpose of this paper was to design and implement effective learning model for internet ethics education, following the learning principle and procedure of PBL(Problem-Based Learning) which is one of the constructivism teaching-learning theories(, and to apply it). In this learning model, online learning and face-to-face classes were systematically combined for achieving the teaching-learning goals and the main module for online learning run on Moodle, an open source LMS(Learning Management System). It is possible for learner to participate actively in creation of micro-contents and reorganize contents using various SNS(Social Network Service). The learner can achieve the learner-oriented learning and select micro-contents in order to reorganize the personalized learning contents to take advantage of SNS among learners. To examine educational effectiveness of the proposed learning model, an experimental study was conducted through the education content and method to the subjects of two classes in the second-grade of university located in OO city. 60 students(treatment group=30, control group=30) participated in the experiment. The result statistically verified that the proposed learning method is more effective in cultivating consciousness of internet ethics than the face-to-face PBL learning method. The results of this paper also showed that a lecture using blended learning is efficient in achieving learning performance and that learners responded positively(, which are indicating that the higher effectiveness of learning would be expected) by forming connectedness among learners using SNS. The results of this paper showed that a lecture using blended learning is effectiveness in achieving learning performance and that learners responded positively, which are indicating that the higher effectiveness of learning would be expected by forming connectedness among learners using SNS.