• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.667-672
• /
• 2002

Concrete cooled to very low temperature cyclically is deteriorated by ice formation in micro-pores. Although the factors to the deterioration are various, storage at very low temperature is mentioned as one of the factors. In practice, storage of cryogenic structure is kept at very low temperatures, and as such, it is important to take into consideration the influence of storage at such low temperature on the deterioration of concrete. Thus, in this study, the influence of storage on the deterioration of concrete at minimum temperatures taking into consideration the different W/C and air content.

• Environmental Analysis Health and Toxicology
• /
• 제1권1호
• /
• pp.71-76
• /
• 1986

The determination of fungal flora in some kinds of cereals have been carried out in other to obtain an appropriate information of the population of fungi and toxin productivity The results were summarized as follow; 1. The predominant genera were Aspergillus, Penicillium, Mucor, Rhizopus, Alternaria, Fusarium. 2. Six of Aspergillus flavus were aflatoxin-producing strains. 3. Sample barleys were found to contain the highest content of aflatoxin. 4. In electron microscopic studies of liver cells from mouse which had been injected with crude toxin, the liver cells showed the cytoplasmic change.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1998년도 제28회 추계학술대회
• /
• pp.25-29
• /
• 1998

Sliding wear test and surface characterization techniques such as micro-Raman spectroscopy were employed to determine the effect of whisker content and orientation on the friction and wear behavior of SiC whisker reinforced alumina. Composites containing unidirectionally oriented whiskers were fabricated by novel technique Addition of SiC whiskers up to 20 vol.% lowered the friction and improved wear resistance. The results of this study indicated that highly disordered graphite and size of the layer behind the whiskers were responsible for variation of wear rate and friction coefficient.

• 한국표면공학회지
• /
• 제30권5호
• /
• pp.347-354
• /
• 1997

Composite plating is a method of co-depositing fine particles of metallic, non-metallic compound or polymers in the plated layer to improve material properties such as were-resistance, lubrication, or corrosion resistance. Graded Ni-Sic composite coating were produced in this research. Prior to produce Graded Ni-SiC composite coatings, effects of particle size, particle content, pH of electrolyte, temperature, current density, stirring rate on the amount of SiC deposited in the Ni layer were investigated. By manipulating current density and plating time properties of these coating were evaluated by micro-indentation hardness test.

• 한국표면공학회지
• /
• 제32권3호
• /
• pp.331-335
• /
• 1999

Electroless plating nickel has superior mechanical property to electroplated nickel. Furthermore nickel can be coated on nonconducting substrate. In this research, electroless plating of nickel were conducted in different bath condition to find optimum conditions of electroless nickel plating for MEMS applications. The selectivity of activation method on several substrates was investigated. The effects of nickel concentration, reducing agent concentration and inhibitor on deposition rate were investigated. The effect of pH on deposition rate and content of phosphorous in deposited nickel was also investigated.

• 수산해양교육연구
• /
• 제27권5호
• /
• pp.1364-1368
• /
• 2015

This study was performed to evaluate mineral contents of catfish Silurus asotus. As a result of mineral content, the mean content of the macro mineral was (in descending order): K (310.36-412.66 mg/100 g), P (186.42-223.02 mg/100 g), Na (35.32-57.87 mg/100 g), Mg (22.88-31.87 mg/100 g), Ca (9.05-13.07 mg/100 g). In comparison, the mean content of the micro mineral was (in descending order): Fe (0.26-0.95 mg/100 g), Zn (0.26-1.02 mg/100 g), Cu (ND-0.08 mg/100 g), Mn (0.01-0.03 mg/100 g). A proportion of mineral intakes with the dietary reference intakes for Koreans (KDRIs) set by the Korean Nutrition Society. Nutrient uptake proportion of mineral intakes was (in descending order): P (62.16%), K (20.71%), Mg (16.82%), Fe (13.02%), Zn (11.38%) Cu (10.94%), Na (6.59%), Ca (3.09%), Mn (0.96%). The mineral content was compared with the major protein food sources according to the Korea Health Statistics (2013) such as polished rice, pork, chicken, beef, eggs and milk. The calcium content contains; lower level of milk and eggs, chicken whereas higher levels of rice, pork and beef. Catfish has less iron content than major protein food source. Phosphorus and potassium contain higher level of major protein food sources.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1997년도 춘계학술발표회논문집(1)
• /
• pp.15-20
• /
• 1997

We present the results HELIOS verification against VENUS PWR critical experiments loaded with high plutonium content mixed oxides fuels. The effective multiplication factors are calculated to be slightly supercritical within an acceptable error bound. In the prediction of power shape, HELIOS results are in close agreement with the measured values. The RMS errors of re-normalized calculated fission rate distribution are less than 1.4 % with either explicit or implicit models or micro tubes/rods in each fuel assembly for both ALL-MOX and GD-MOX mock-up cores.

• 한국안전학회지
• /
• 제25권3호
• /
• pp.28-33
• /
• 2010

Ni alloy steel is able to use during long time because of good acid and corrosion resistance. So, it's research has focused on developing the alternative alloy which is economically feasible. Recently, consumption of Kovar steel is gradually increased in field of the jet engine and the gas turbine because of its low thermal expansive characteristics. The specimens of Kovar steel(29%Ni-17%Co) contain 0.00%C, 0.03%C, 0.06%C, 0.10%C and 0.20%C, respectively. Ingots are manufactured by VIM(vacuum induction melting furnace) and then specimens are made by automatic hot rolling after heat treatment. Strength of Kovar steel according to carbon contents is estimated by hardness, tensile and impact test. Hardness of the 0.20%C specimen is more improved approximately 14.4% than one of base metal. Its strength increases 32.4% of a base metal, and its impact energy is also enhance 11.5%.

• 한국식품영양과학회지
• /
• 제28권6호
• /
• pp.1208-1211
• /
• 1999

Semi HPLC using a column switching technique was used to determine the trace content of vitamin B12 in various foods. Total analytical time required less than 20 mins per sample and the recovery ratio was 99.9, 99.6, 100.1 and 99.8% for 1.0, 10.0, 100.0 and 1,000 g/kg, respectively. The content of vitamin B12 in various foods obtained using column switching method showed higher levels compared to labels in dried milk(0.5 g/100g) and in grain products(0.51~34.36 g/100g). Thus, this column switching method was more sensitive, effective and precise than the microbiological analysis currently used to determine the trace compounds like a vitamin B12.

• 수산해양기술연구
• /
• 제28권3호
• /
• pp.295-305
• /
• 1992

The critical strain energy release rate and the failure mechanisms of glass-carbon epoxy resin hybrid composites are investigated in the temperature range of the ambient temperature to 8$0^{\circ}C$. The direction of laminates and the volume fraction are [(+45, -45, 0, 0) sub(2) ] sub(s), 50%, respectively. The major failure mechanisms of these composites are studied using the scanning electron microscope for the fracture surface. Results are summarized as follows: 1) The critical strain energy release rate shows a maximum at ambient temperature and it tends to decrease as temperature goes up. 2) The critical strain energy release rate increases as the content of glass increases, and especially shows dramatic increase for the high glass fiber content specimens. 3) Major failure mechanisms can be classfied such as localized shear yielding, fiber-matrix debonding, matrix micro-cracking, and fiber pull-out and/or delamination.